Jinian, Almost everything that has been suggested you have found a reason not to do. Just like right now. You were requested to do a clean install, but you want to restore an image with a program you were asked to uninstall and not use. You say from a Not Defective OS.
Code:
3687 errors : !Ntfs (fffff8800132a001-fffff8800132afff)
And
when I ran the sfc /scannow afterwards it still gave me the same "corrupted files were found but could not be repaired" message.
Says you do, in fact, have defective OS.
Or this
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 7A, {fffff6fc40007270, ffffffffc000000e, 2ff0ec860, fffff88000e4e630}
*** WARNING: Unable to verify timestamp for snapman.sys
*** ERROR: Module load completed but symbols could not be loaded for snapman.sys
*** WARNING: Unable to verify timestamp for tdrpm273.sys
*** ERROR: Module load completed but symbols could not be loaded for tdrpm273.sys
GetPointerFromAddress: unable to read from fffff80003acb278
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
Followup: memory_corruption
But you don't want to run memtest86+ the proper way.
Arc, has tried to help you, but you refuse to accept what he has said and he has stopped posting in this thread. I have come in to try to help you but you want to find ways around what I say. That makes 3 BSOD
Team members you have been through and still don't want to do what we tell you needs to be done. You have a corrupted, defective Operating System and the only way you will fix it is a clean install. Clean Reinstall - Factory OEM Windows 7
You also need to run memtest86+ to make sure the corrupted system files were not caused in part by corrupted memory.
Please Run Memtest86+
Information
Please download from this site only
http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip
Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask
There is nothing more that needs to be added to this thread.