Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Seemingly random BSODs


02 May 2014   #1

Win7 Ultimate, 64bit
 
 
Seemingly random BSODs

Getting BSODs at random, but it seems as though most of the time it's because I alt tab into or out of a full screen program. This might of course be confirmation bias.

Got this when I logged back on, maybe it can help:

BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF96000164283
BCP3: FFFFF880097CC020
BCP4: 0000000000000000

Dm log collector dumpfiles attached.



Attached Files
File Type: zip STINKFISHCO-03_05_2014__12450,18.zip (952.2 KB, 4 views)
My System SpecsSystem Spec
.

02 May 2014   #2

 

I thought your problem was solved?

Seemingly random BSODs on new build

Daemon Tools is a known cause of BSODs, uninstall it.

Code:
DAEMON Tools Lite	"d:\program files (x86)\daemon tools lite\dtlite.exe"
Let us know how it goes.
My System SpecsSystem Spec
03 May 2014   #3

Win7 Ultimate, 64bit
 
 

My original problem was not solved, however a new kind of BSOD (the full screen one which was later solved thanks to you) appeared when I tried to fix the original BSOD (random BSOD).

Uninstalling Daemon Tools. I will report back when/if I get another BSOD. Do I mark the thread as solved?
My System SpecsSystem Spec
.


03 May 2014   #4

 

Only mark the thread as solved when you feel confident that you issue has been fixed.

Let us know how everything goes
My System SpecsSystem Spec
15 May 2014   #5

Win7 Ultimate, 64bit
 
 

Uninstalling Daemon Tools didn't seem to fix it. Dm log files attached.

BCCode: 50
BCP1: FFFFF900C3128D44
BCP2: 0000000000000000
BCP3: FFFFF9600022779C
BCP4: 0000000000000000


BCCode: 50
BCP1: FFFFF906E244F630
BCP2: 0000000000000000
BCP3: FFFFF9600031C445
BCP4: 0000000000000005


Attached Files
File Type: zip STINKFISHCO-15_05_2014_205536,55.zip (1.08 MB, 1 views)
My System SpecsSystem Spec
15 May 2014   #6

 

Can you also enable driver verifier but only enable the options: Standard settings and IRP logging step 3.
Don't enable Force Pending I/O Requests

Enable Driver Verifier to monitor the drivers.
Driver Verifier -Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information

Why Driver Verifier:
It puts a stress on the drivers, and so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.


warning   Warning

Before enabling DV, make sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there are no points, make a System Restore Point Manually before enabling DV.


Tip   Tip
  • If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
  • If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.


Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
29 May 2014   #7

Win7 Ultimate, 64bit
 
 

BCCode: 50
BCP1: FFFFF900E9762FA0
BCP2: 0000000000000000
BCP3: FFFFF9600023C445
BCP4: 0000000000000002


Attached Files
File Type: zip STINKFISHCO-29_05_2014_132404,96.zip (1.22 MB, 1 views)
My System SpecsSystem Spec
29 May 2014   #8

 

Looks like bad RAM to me.

Stress test your CPU with Prime95

I recommend running Prime95 for around 2 hours

warning   Warning

As with most stress tests your component's temperature will rapidly increase.
It is advised that you download a temperature monitoring program like HWmonitor
Keep an eye on your temperatures and stop the tests if it starts to overheat


Stress test your graphics card with Furmark

I recommend running it for around 30 minutes

warning   Warning

Furmark will increase the temperature of your GPU rapidly so keep and eye on your temperatures


Memtest86 will test your RAM

information   Information

Run Memtest86 for at least 8 passes so we get enough information to confirm that your RAM isn't failing


Run a Disk Check to scan for errors

Note   Note

Afterwards go into an Elevated Command Prompt (Run as administrator) and type in sfc /scannow
If it finds errors reboot and run the scan two more times


Run SeaTools to see if your HDD or SSD is failing

Post back the results.
My System SpecsSystem Spec
Reply

 Seemingly random BSODs




Thread Tools



Similar help and support threads for2: Seemingly random BSODs
Thread Forum
Seemingly random BSODs BSOD Help and Support
Seemingly random BSODs BSOD Help and Support
Been having seemingly random BSODs BSOD Help and Support
Seemingly random BSODs? BSOD Help and Support
Seemingly Random BSODs BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:13 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33