Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Another storport.sys BS0D But With A Time Element

04 May 2014   #1
Arelem

Windows 7 Ultimate 64 bit
 
 
Another storport.sys BS0D But With A Time Element

Hi, I'm another of those souls being afflicted by the storport.sys BSoD. I have tried several of the solutions I have found around n' about the interwebs but with no luck.

This one seems different in that there is a time element involved. If I am on my PC for 4 or 5 hours, nothing happens. But if I have it on for 10 or 12 hours or longer, it will happen. This has gotten very noticeable since I have rejoined the SETI@Home program and leave it on 24/7. It reboots once almost everyday.

The computer should be completely updated, patched and otherwise up-to-date.

I've exhausted my resource as a tech support guy and hope someone in SevenForums World can help.

Thanks.


My System SpecsSystem Spec
.
04 May 2014   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi.

The BSOD is caused by Intel Rapid Storage.
Quote:
BugCheck D1, {773400270008, 2, 0, fffff8800190c0d2}

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
Probably caused by : iaStorA.sys ( iaStorA+64024 )

Followup: MachineOwner
---------
IRST fails very often, and no other action than uninstalling it can make the system free from this error in the long run.

But in your existing situation you cannot uninstall IRST; because it is set to SCSI mode. Every attempt to uninstall will be reverted at the next restart. In order to get rid of IRST, you need to perform a clean reinstall of windows, followed by a little adjustment in BIOS.

Boot into the BIOS. Enter into Advanced BIOS setup. Change the storage controller mode .... from SCSI/RAID to AHCI/ATA/IDE whichever is available. Then reboot.

Upon reboot, windows will not be bootable any more, because it needs the storage controller present on which it was originally installed.

And at this time you need to perform a clean reinstall.

If you set AHCI, the new storage controller will be msahci.sys
If you set to IDE/ATA, the new storage controller will be pciide.sys
None of them fails and causes a BSOD.

Sorry for such a hectic suggestion, but there is no other way to deal with this issue for a long run.
My System SpecsSystem Spec
04 May 2014   #3
Arelem

Windows 7 Ultimate 64 bit
 
 

Crap. I will just probably deal with it then until I build a new system then.

Thank you for your help.
My System SpecsSystem Spec
.

04 May 2014   #4
Arelem

Windows 7 Ultimate 64 bit
 
 

One more question, if I may. Might the BSoDs stop if I add a second drive and make use of the RAID function? Currently I'm not.
My System SpecsSystem Spec
04 May 2014   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Arelem View Post
One more question, if I may. Might the BSoDs stop if I add a second drive and make use of the RAID function? Currently I'm not.
RAID will not make you free of problems, but will cause new problems.
My System SpecsSystem Spec
Reply

 Another storport.sys BS0D But With A Time Element




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BS0D 0x000000f4 Surfing web, Playing WOW / Random
Not certain what is going on. I have seen F4 related to HDD/RAM. Have replaced both, Also replaced the SATA Cable...So now i turn to some higher GURU's...
BSOD Help and Support
Storport BSOD
Newly built custom server. Both my storage drive and OS drive are on the same Channel. When the storage drive is not connected I haven't had any BSODs (could be coincidence). I would rather not have to spend another grand and buy new drives for the SAS channels; would like to continue using...
BSOD Help and Support
BSOD IRQL_NOT_LESS_OR_EQUAL Storport.sys
I put together a brand new build and am struggling with reoccurring BSODs. BSOD #1: Stop 0xOOOOOO1E BSOD #2: DRIVER_IRQL_NOT_LESS_OR_EQUAL Storport.sys Specs:
General Discussion
BS0D 3b please help
BCCode: 3b BCP1: 00000000C0000005 BCP2: FFFFF88005F75817 BCP3: FFFFF88008B3A900 BCP4: 0000000000000000 OS Version: 6_1_7600 Service Pack: 0_0 Product: 256_1 Window ultimate 7 x64
BSOD Help and Support
Installation stops! storport.sys
Hi i've tried to install w7 but installation keeps stopping, i can't even reach to where you choose to install... I get a error then in storport.sys, i've tried the x86, and x64, of the 7600, and from the RC's, without success in none... And i tried all these with only 1 gb of ram... I've got a...
Installation & Setup
BS0D Win7 Ultimate 64bit Signature Edition
Hi everyone, I recently (> 1 week) built a new PC, and am having some issues. I have had 8 BSOD's in the last couple of days. They all occurred during moderate usage of the computer. All have occurred during booting up or coming out of sleep mode. I downloaded the latest Mobo BIOS. Double...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:46.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App