Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD-> ->Startup recovery failure

16 May 2014   #1
ilgeor

win7 64 bit
 
 
BSOD-> ->Startup recovery failure

Hi all,
My almost fresh win 7 install crashes continiously
The Bsod blinks for a second (saying blahblah - I noticed no error codes), then system restarts
None of recovery methods will work, system restore gives 0x8000ffff error,
Startuprepair fails to fix the problem, saying

Quote:
OS: 6.1.7600.16385 (win 7&64bit)

Problem 04 signature: 21199452 (google shows NO results for this)

05 Signature: AutoFailover

06 signature differs: 8\13\...

07 signature: norootcause

This won't work-
Code:
 bootrec.exe  /fixmbr
 bootrec.exe  /fixboot
 bootrec.exe  /RebuildBcd
gives Windows installations 0

this won't work either -
Startup Repair Infinite Loop Recovery

This, however, finds Windows installation,
Code:
Bcdedit /export C:\BCD_Backup

ren c:\boot\bcd bcd.old

Bootrec /rebuildbcd
Yet after that the same BSOD blinks and everything fails
ah, btw, running bootrec /scanos returns NO Windows installations

I am sick and tired, help me please


My System SpecsSystem Spec
.
16 May 2014   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by ilgeor View Post
Hi all,
My almost fresh win 7 install crashes continiously
The Bsod blinks for a second (saying blahblah - I noticed no error codes), then system restarts
None of recovery methods will work, system restore gives 0x8000ffff error,
Startuprepair fails to fix the problem, saying

Quote:
OS: 6.1.7600.16385 (win 7&64bit)

Problem 04 signature: 21199452 (google shows NO results for this)

05 Signature: AutoFailover

06 signature differs: 8\13\...

07 signature: norootcause
This won't work-
Code:
 bootrec.exe  /fixmbr
 bootrec.exe  /fixboot
 bootrec.exe  /RebuildBcd
gives Windows installations 0

this won't work either -
Startup Repair Infinite Loop Recovery

This, however, finds Windows installation,
Code:
Bcdedit /export C:\BCD_Backup

ren c:\boot\bcd bcd.old

Bootrec /rebuildbcd
Yet after that the same BSOD blinks and everything fails
ah, btw, running bootrec /scanos returns NO Windows installations

I am sick and tired, help me please
What is the Bugcheck code? Can you tell us? Better, can you take a picture of the BSOD screen and upload it here?

Also, do you have access to another computer right now? If so, download Partition wizard Bootable CD (the last one in the link). Burn it in a blank CD or in a USB flash stick.

Boot into Partition Wizards GUI following this instructions. When you are on the last screen, take a camera snap of the screen and upload the snap here.
Screenshots and Files - Upload and Post in Seven Forums
My System SpecsSystem Spec
16 May 2014   #3
ilgeor

win7 64 bit
 
 

Here goes the BSOD

As you can see, no error codes here
My System SpecsSystem Spec
.

16 May 2014   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hmm ... it is not a conventional BSOD.

Try the partition wizard steps if possible.
My System SpecsSystem Spec
16 May 2014   #5
ilgeor

win7 64 bit
 
 

Quote   Quote: Originally Posted by Arc View Post
Boot into Partition Wizards GUI following this instructions. When you are on the last screen, take a camera snap of the screen and upload the snap here.
Screenshots and Files - Upload and Post in Seven Forums

Here it goes:
(120 GB SSD is primary, 1.34 TB is filestorage, others are usb sticks)
My System SpecsSystem Spec
16 May 2014   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Better you remove the other discs (by disconnecting the SATA cables) for the time being, till it is not properly booting up. Keep only the SSD connected.

Mark the 100 MB partition as active following the step 3 of Partition - Mark as Active

Next, run Startup Repair for three separate times, with restarts after every single run.
Startup Repair: Run three separate times.

Let us know the result.
My System SpecsSystem Spec
16 May 2014   #7
ilgeor

win7 64 bit
 
 

btw, file system is accessible, even within windows recovery (step where you can choose drives)
it just...won't boot

There were some viruses, windows defener offline found them
namely, Dropper:Win32/Dunik!rts
I cleaned it - no success
and, i found it on all windows pc, guess, it was slippery flash stick
*old samsung laptop also showed windows recovery menu - but it managed to repair everything automaticly from the 1 try
however, only this fresh pc with bitdefender onboard failed -_-
My System SpecsSystem Spec
16 May 2014   #8
ilgeor

win7 64 bit
 
 

my main notebook, without ANY antivirus, and carrying that dunik inside, functioned flawlessly
so it is not the point - just the remark
My System SpecsSystem Spec
16 May 2014   #9
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

OK, you follow the post #6 and let us know the result.

EDIT: if it is still the same, follow it:
Troubleshooting Windows 7 Failure to Start
My System SpecsSystem Spec
16 May 2014   #10
ilgeor

win7 64 bit
 
 

nah, after marking 100 MB active - it fails just as always
My System SpecsSystem Spec
Reply

 BSOD-> ->Startup recovery failure




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Brief BSOD on Startup, Startup Recovery Hangs
I have Win 7 Home and in the last couple of days I have been trying to do a backup onto an external drive. The problem comes in when I attempt to start my laptop so that I can begin the backup process, the screen flickers a BSOD, says startup failed and do I want to run Startup Recovery. If I say...
BSOD Help and Support
BSOD at Startup. Memory or Drive failure? Page_Fault_In_Nonpaged_Area
Hi, I'm trying to troubleshoot what's gone wrong with my computer, and I was hoping someone could help. I self built this ~2 years ago, and haven't had a problem until now. Build Here (Intel Core i5-3570K, Asus GeForce GTX 780, Fractal Design Define R4 (Black Pearl) - System Build - PCPartPicker)...
BSOD Help and Support
[BSOD or error during shutdown][recovery pop up on startup]
Error recovery reports a BSOD during shutdown Issues with toggling LAN adapter after internet connectivity breaks Grab all in zip file attached Thanks for the help.
BSOD Help and Support
Recovery disk failure!
First of all, my other computer was running slowly so I made a recovery disk via the control panel and then booted the disk. I chose the option to set my system to factory settings and it took me to this ACER eManagement thing which gave me the same options. After about a while of loading, my...
Installation & Setup
Motherboard failure and Windows 7 recovery
After recently upgrading to Windows 7 Ultimate 32-bit, first my old graphics card melted, which I successfully replaced, and now my motherboard recently crapped itself. I've replaced it with a different motherboard and had to upgrade my RAM, but still retained the old CPU. Windows 7 now won't load,...
Backup and Restore
Sleep Recovery Failure
I have another computer exactly like the one you'll see under my profile, however it has: a different 1GB video card that uses only 1 x 6-pin connector. a wireless mx5500 keyboard and mouse After sleeping overnight or for extended hours, when the mouse is moved, the system powers up but...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App