Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 0x7a and 0xF4 BSOD

28 Jun 2014   #41
TehEspada

Windows 7 Home Premium 64bit
 
 

I've tried most of the ports already, the 2 most recent blue screens in my last dm log were in a different port. There is a computer place near by I'm gonna try to go to tomorrow and see if they have any sata cables for sale, the one I ordered wont be here for a few more days.

I'm gonna try a fresh install and be careful of the driver I install, I tried a fresh install a couple times before and it didn't really help but the blue screens are getting so frequent, so I'm gonna give it another shot.


My System SpecsSystem Spec
.
29 Jun 2014   #42
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

When the BSOD will occur next time, upload the entire DM logs, not the dump only. I want to take another close look.
My System SpecsSystem Spec
29 Jun 2014   #43
TehEspada

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Arc View Post
When the BSOD will occur next time, upload the entire DM logs, not the dump only. I want to take another close look.
The only thing the fresh install did was speed up load times and boot times but it didn't fix the blue screens, Attachment 323567
My System SpecsSystem Spec
.

29 Jun 2014   #44
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

From the event logs, MSE failed to get updates. Then it tried to load, which kept pending for 44 seconds and the stop 0xF4 occurred.

Can you uninstall it and then download a fresh copy of MSE to install it?
My System SpecsSystem Spec
29 Jun 2014   #45
TehEspada

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Arc View Post
From the event logs, MSE failed to get updates. Then it tried to load, which kept pending for 44 seconds and the stop 0xF4 occurred.

Can you uninstall it and then download a fresh copy of MSE to install it?

Got multiple 0xF4 and 1 0x7E, it's only happening while the gpu is plugged in, I removed the gpu and was able to log on fine. I also haven't had my computer freeze up on me yet with the gpu removed. Attachment 323658

Not sure if its driver related or its the motherboard, gpu or power supply...
My System SpecsSystem Spec
30 Jun 2014   #46
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by TehEspada View Post

Got multiple 0xF4 and 1 0x7E, it's only happening while the gpu is plugged in,
The 0x7E blames the disc.
Code:
BugCheck 1000007E, {ffffffffc0000006, fffff80002e5095f, fffff880072cb7e8, fffff880072cb050}

Probably caused by : hardware_disk

Followup: MachineOwner
---------
And so the 0xF4 is.
Code:
BugCheck F4, {3, fffffa8009014b30, fffffa8009014e10, fffff800021c5260}

----- ETW minidump data unavailable-----
Probably caused by : hardware_disk

Followup: MachineOwner
---------
Previously your 0x7A BSODs reported the same.
  • You applied another disc.
  • You changed the SATA cables.
  • You tried different motherboard ports.
  • Even you have done a clean reinstall.
Nothing changed the situation.

Either you have got both the HDDs bad (hard to believe) or the motherboard is corrupt.

We cannot test the mobo; but test the replacement HDD using WinDFT.

If the disk is tested to be good, and still the BSODs continue to occur, unfortunately we will have nothing left to blame but the motherboard.
My System SpecsSystem Spec
30 Jun 2014   #47
TehEspada

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Arc View Post
Quote   Quote: Originally Posted by TehEspada View Post

Got multiple 0xF4 and 1 0x7E, it's only happening while the gpu is plugged in,
The 0x7E blames the disc.
Code:
BugCheck 1000007E, {ffffffffc0000006, fffff80002e5095f, fffff880072cb7e8, fffff880072cb050}

Probably caused by : hardware_disk

Followup: MachineOwner
---------
And so the 0xF4 is.
Code:
BugCheck F4, {3, fffffa8009014b30, fffffa8009014e10, fffff800021c5260}

----- ETW minidump data unavailable-----
Probably caused by : hardware_disk

Followup: MachineOwner
---------
Previously your 0x7A BSODs reported the same.
  • You applied another disc.
  • You changed the SATA cables.
  • You tried different motherboard ports.
  • Even you have done a clean reinstall.
Nothing changed the situation.

Either you have got both the HDDs bad (hard to believe) or the motherboard is corrupt.

We cannot test the mobo; but test the replacement HDD using WinDFT.

If the disk is tested to be good, and still the BSODs continue to occur, unfortunately we will have nothing left to blame but the motherboard.
The drive wouldn't show up in WinDFT but I did run a dskchk last night and it had no errors and I also ran a couple test with SeaTools and it had no errors, here is another 0xF4 Attachment 323760.

I'm gonna fill out a repair request with Gigabye now and we'll see what happens in a couple weeks when I have a working motherboard.

Edit:: I got my new SATA cable and installed it along with reinstalling my GPU, I've been able to log in no problem but I had a few more 0xF4 but I'm pretty sure they're from the wireless card I tried installing, Attachment 323792 I took out the card and went back to using my USB wireless stick and everything is running fine again, I'm gonna use the computer like normal and see if I encounter any problems.
My System SpecsSystem Spec
01 Jul 2014   #48
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If what you said is true then it is something unforeseen to me.

Frankly speaking, I have never seen stop 0xF4s causing for anything other than the storage environment (your BSOD dumps also reported in the same line). But you are talking about a PCI network card I think.

If the computer works stable without that card, definitely it will add something new to my debugging knowledge.
My System SpecsSystem Spec
Reply

 0x7a and 0xF4 BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
New Lenovo Laptop Stop Errors Alternating 0xf4 and 0x7a Out the Box
Laptop Lenovo G50-70 Model Name 20351 Windows 7 Ultimate x64 SP 1 Intel i5-4210U 1.7gh Lenovo Lancer 5A2 Samsung DDR3 8G PC3-12800 1.35V Integrated Intel HD 4400 Samsung Momentus 1TB 2.5 inch 5400RPM Microsoft Security Essentials Opera/Firefox/Explorer
BSOD Help and Support
BSODs 0xf4 and 0x7a After Installing New SSD
Hello guys, I'm really hoping somebody can help me because I'm at my wit's end! A few months ago, I bought a Crucial M500 480Gb SSD for my Vaio laptop, but since then I've been plagued by two different BSODs, 0xf4 (CRITICAL_OBJECT_TERMINATION) and 0x7a (KERNEL_DATA_INPAGE_ERROR). I've used...
BSOD Help and Support
BSOD witn new SSD intel 520 0xF4 and 0x7a
Received as a present a brand new SSD Intel 520 180GB. Tried to install Win 7 Ult x64 and Win 7 Pro x64 from different discs. Have the same errors, sometimes 0x000000F4, sometimes 0x0000007a. It happened during installation updates from MS or when I surfing via FireFox. Contacted Intel support,...
BSOD Help and Support
Spontaneous BSODs, 0x7A and 0xF4 following 0xDEADDEAD
This really came out of the blue, but it all started within the past week. First there was the rare 0xDEADDEAD, which, after some quick googling, it seemed that the Intel wireless driver was the culprit. Updated that, and then the crashes turned into 0x7A and 0xF4. Nothing really triggered them,...
BSOD Help and Support
0xF4/0x7A BSOD Issues while Gaming
Since I updated to Windows7 x64 SP1 I am repeatedly getting BSODs only when playing games e.g. Witcher 2, Alice, Sanctum, Hunted: Demon's Forge, Hydrophobia, Left4Dead etc. (not really entirely reproducible) Some other games, even 3D intensive ones either run without issues or I haven't run into...
BSOD Help and Support
0xF4, 0x7B, 0x7A BSOD with new SSD, leaning towards motherboard?
I received my new Samsung 830 Series 128GB SSD yesterday and mostly set up everything, experiencing blue screens along the way... I'll start with some previous problems that I think are contributing to these errors. I built this computer a little over a year ago. Shortly after I noticed my DVD...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:11.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App