Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSODs while using computer

29 May 2014   #1
Spavid

Windows 7 Ultimate x64
 
 
Random BSODs while using computer

For 3 days now I have been getting random blue screens (photos attached in BSOD.zip), all related to RAM. Today after a crash I ran a 1-hour long Memtest86+ and found absolutely nothing wrong (completed the whole process twice). Thought it may be the HDD and pagefile (why not ) and ran a chkdsk, nothing wrong. At first, I crashed only while compiling in Visual Studio (Ultimate 2013) and it happened 30 minutes or 5 hours after beginning to code. Having seen other's PCs crash due to compiling (not VS necessarily), I did not worry. Just now I had a crash and I hadn't even started VS in this session, which was a troubling thing. I really can't put my finger on it. Any ideas?


My System SpecsSystem Spec
.
29 May 2014   #2
Thedoctor44

 

Getting a few mixed responses.

Code:
BugCheck 1A, {41790, fffffa800232a460, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )
I'm seeing Page Table Entry corruption, most likely drivers.
Here's why:

The 1st parameter indicates page table entry corruption.
The 2nd parameter is the address for the Page Frame Number that represents the corrupted page table.
The 3rd parameter contains the amount of page table entries in use at the time of the crash.

Code:
1: kd> dt nt!_MMPFN fffffa800232a460
   +0x000 u1               : <unnamed-tag>
   +0x008 u2               : <unnamed-tag>
   +0x010 PteAddress       : 0xfffff6fb`40000ed8 _MMPTE
   +0x010 VolatilePteAddress : 0xfffff6fb`40000ed8 Void
   +0x010 Lock             : 0n1073745624
   +0x010 PteLong          : 0xfffff6fb`40000ed8
   +0x018 u3               : <unnamed-tag>
   +0x01c UsedPageTableEntries : 0xffff
   +0x01e VaType           : 0 ''
   +0x01f ViewCount        : 0 ''
   +0x020 OriginalPte      : _MMPTE
   +0x020 AweReferenceCount : 0n128
   +0x028 u4               : <unnamed-tag>
Indeed the 3rd parameter was correct, in fact there are less than zero page table entries which is most likely caused by a driver calling the MmUnlockPages function too many time which causes physical pages to be unlocked.

However, on the other hand you are also getting Working Set page corruption which is mainly caused by bad RAM.

Code:
1: kd> !wsle 2

Working Set @ fffff70001080000
    FirstFree     289f  FirstDynamic        5
    LastEntry     289e  NextSlot            5  LastInitialized     296e
    NonDirect        0  HashTable           0  HashTableSize          0

Reading the WSLE data ......Unable to get Wsle table block - address fffff70001081088 - count 1024 - page 0x180
Lets take a quick look at the raw stack...

Hmm a few I/O routines and Interrupts.

Avast is causing issues.
Code:
Unable to load image \SystemRoot\system32\drivers\aswMonFlt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswMonFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for aswMonFlt.sys
 aswMonFlt+0x2155
Remove it using the removal tool

I'd give Memtest86 a try as well.

Memtest86 will test your RAM

information   Information

Run Memtest86 for at least 8 passes so we get enough information to confirm that your RAM isn't failing


Lastly I noticed you had this installed...

Code:
DAEMON Tools Pro Agent	"c:\program files (x86)\daemon tools pro\dtagent.exe" -autorun	DAVID-PC\DAVID	HKU\S-1-5-21-274158315-4080150620-116267909-1000\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Daemon Tools/Alcohol is known cause of BSODs.

Registry and SPTD problems | DAEMON Pro Help
How to remove sptd.sys from system

1. Uninstall Daemon Tools.
2. Download the SPTD standalone installer and follow these steps:
3. Double click the executable to open it
4. Click the button shown below



If the button it is grayed out, as shown in the image, there is no more SPTD installation on your system, and you can just close the window.


Free your startup, remove all unnecessary programs from launching when you first login.

Startup Programs - Change

Post back the results.
My System SpecsSystem Spec
06 Jun 2014   #3
Spavid

Windows 7 Ultimate x64
 
 

Ok it seems that it was Daemon tools after all because since I reinstalled it with Revo Uninstaller my PC hasn't crashed yet. Regarding memtest, it found nothing, so I can only assume that the crashes were software-related. Thank you for posting such a comprehensive analysis
My System SpecsSystem Spec
.

Reply

 Random BSODs while using computer




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Computer BSODs at random times
My computer has been BSOD'ing lately. It usually happens when I try to update windows. This usually will cause windows to freeze screen for a short bit, or not allow me to do anything (click programs, start menu, or anything on the taskbar). After this usually results in a BSOD. Please help The...
BSOD Help and Support
My computer keeps crashing with random BSoDs!
Okay, so today, my computer has crashed FIVE TIMES for the most random reasons. I have also written the times that it crashed and what error it gave me. 1) BAD_POOL_HEADER (8:58 AM) I got this error while I was watching a video. 2) PAGE_FAULT_IN_NONPAGED_AREA (1:54 PM) I don't know how or why...
BSOD Help and Support
Random BSODs on new computer
Hi, I recently built a new computer, it's my first time and all seemed well, but I had some issues whilst installing Windows 7 onto it, there were some driver issues with sata raid controllers missing, this was fixed after I format my harddisk. The issue now is Windows constantly keeps...
BSOD Help and Support
Computer keeps on getting random BSODs and ´freezing´
Hey, I`ve started having very strange and very serious bsod-problems and weird freezes last fall. I tried everything from re-installing all drivers and the whole OS (I even changed it to XP). When I tried driververifier.exe the whole rig went berserk. Finally I could`t even install xp without...
BSOD Help and Support
Random BSODs on New Computer
Hi, I've posted on these forums before, but I was never able to solve my blue screen problem. I've been struggling with these blue screens since I built my computer about 5 months ago. I'm currently running windows 7 64 bit. I've ran multiple memory tests with 7 passes and they have all come...
BSOD Help and Support
Random BSODs on new computer
Hi, I just recently built my own computer, and it has been randomly blue screening since I first turned it on. When I looked at the dump files, it seemed like it was cause by something different every crash. I feel like I've tried everything to no avail. -I've done multiple memory tests...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 19:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App