Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSODs after hardware upgrade

05 Jun 2014   #11
derekimo

Microsoft Community Contributor Award Recipient

 
 

Yeah, it's your video drivers again,

Code:
Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
 atikmdag+0x1f3240
Code:
Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Fri Dec 06 13:19:43 2013 (52A23F6F)
    CheckSum:         00CA856E
    ImageSize:        00CF0000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My Recommendation is to:

Quote:
Uninstall your installed latest version of the display driver.
Then clean up any possible leftover.
Then install version 13.9 WHQL only.



My System SpecsSystem Spec
.
05 Jun 2014   #12
Anilusion

Windows 7 Professional x64
 
 

I just got another one while running HD Tune error checking on my SSD.
My System SpecsSystem Spec
06 Jun 2014   #13
Anilusion

Windows 7 Professional x64
 
 

Got another one when running HD Tune error checking on one of my other drives over night. NTFS_FILE_SYSTEM, ntfs.sys. Is something wrong with my motherboard?

edit: and another one when watching Twitch streams, ATTEMPTED_WRITE_TO_READONLY_MEMORY, ntfs.sys.
My System SpecsSystem Spec
.

06 Jun 2014   #14
derekimo

Microsoft Community Contributor Award Recipient

 
 

Alright, let's slow down here, one thing at a time. Also, please just run the tool every time you upload instead of just the single dumps.

Earlier you posted that you were running prime 95 and furmark, don't run them at the same time and you were only asked to run furmark.

You haven't responded to post #11, and from your latest dumps I can see you haven't tried that driver.

From your latest dumps, I would suggest,

Please perform the following tests,

chkdsk /r

SFC /SCANNOW Command - System File Checker
My System SpecsSystem Spec
06 Jun 2014   #15
Anilusion

Windows 7 Professional x64
 
 

Ran both harddrive test, zero errors. I've also done what you mentioned in post#11 and I'm going to run Furmark again now.
My System SpecsSystem Spec
06 Jun 2014   #16
Anilusion

Windows 7 Professional x64
 
 

Ran Furmark with the settings in your link for 1 hour, zero artifacts, temp stable around 87c.
My System SpecsSystem Spec
06 Jun 2014   #17
derekimo

Microsoft Community Contributor Award Recipient

 
 

Alright, let's see how that 13.9 driver works for you. Keep us posted.
My System SpecsSystem Spec
06 Jun 2014   #18
Anilusion

Windows 7 Professional x64
 
 

Just got another BSOD while playing EVE and watching twitch.
My System SpecsSystem Spec
07 Jun 2014   #19
Anilusion

Windows 7 Professional x64
 
 

And another one.
My System SpecsSystem Spec
07 Jun 2014   #20
Anilusion

Windows 7 Professional x64
 
 

Just got one while playing Dota 2.
My System SpecsSystem Spec
Reply

 Random BSODs after hardware upgrade




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSODs, possible faulty hardware but not sure...
Hi Everyone, My PC recently crashed, i.e. would not boot into Windows and I had to reinstall. I thought I may have fried the processor by overheating it (apparently I did not apply the thermal paste very effectively when I assembled this thing back in 2011...) but that does not seem to be the...
BSOD Help and Support
Random BSODs. Drivers are up to date and Hardware has gotten the A-OK
I reinstalled windows thinking the OS was eaten up by some magical virus. Updated all the drivers. I've Run Windows extended Memory diagnostic and tested the Hard drive both came back clear or errors. I am at my wits end. It is my first build only about 2 months old. BSOD started only this past...
BSOD Help and Support
New Hardware BSODs
Recently I had my PSU die and when removing it I cleaned out the computer, and either when the PSU died or when I was cleaning out the computer, my CPU died too. So I went out and bought a new PSU, CPU, Motherboard, and RAM. I installed it all, installed Windows 7, started installing my programs,...
BSOD Help and Support
New Hardware Same BSoDs
Hey everyone, Unfortunately, it looks like I'm back with blue screen errors again. Previously, I had updated all of my drivers, and when that failed I sent my computer back to the manufacturer for repairs. Both the motherboard and CPU were replaced and all seemed well until a little while ago. ...
BSOD Help and Support
NEW PC HARDWARE BSODS - minidumps in
Hi you all!! Well, I've had a lot of bsods. I've test hdd, ram, change cpu but they still here... So I need your help;) Bsods always happen after few minutes - three, four - system is logged. And, after first bsod, such restart means another bsod...:mad: So, I turn pc off and go to sleep. In...
BSOD Help and Support
BSODs...possibly hardware
I did an upgrade on a computer about a week ago. After about 4 days it started BSODing. It wa so bad that I couldnt get the minidump out and have tried reinstalling 7 and even the Vista factory image. However, it would BSOD before the image would fully load. Clearly this is a hardware issue though...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App