Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSODs after hardware upgrade

07 Jun 2014   #21
derekimo

Microsoft Community Contributor Award Recipient

 
 

OK, let's try something else,

Can you test with your creative sound card unplugged and see if things get better.

Code:
Unable to load image \SystemRoot\system32\drivers\ha20x2k.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ha20x2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ha20x2k.sys
 ha20x2k+0x97ff4



My System SpecsSystem Spec
.
07 Jun 2014   #22
Anilusion

Windows 7 Professional x64
 
 

I'm gonna try some other sound drivers before I remove the card. I have noticed some other weird things happening though. When I start my computer my mouse doesn't work for 10-20 seconds, and my screens turn off once or twice and I hear the windows "connected device" and "disconnected device" sounds. The screens somtimes also switch which one is the main display when that happens. I've also had some more random program crashes.
My System SpecsSystem Spec
07 Jun 2014   #23
Anilusion

Windows 7 Professional x64
 
 

Okay, drivers didn't help. Will try removing the card tomorrow.
My System SpecsSystem Spec
.

08 Jun 2014   #24
Anilusion

Windows 7 Professional x64
 
 

Okay, uninstalled all the drivers, used Driver Sweeper in safe mode, removed the card, activated the internal sound card and downloaded and installed the drivers. No bluescreens yet but in a few hours I have had the sound "crash" twice, basically the sound get "stuck" for a few seconds then just disappears completetly untill I restart the system.

Windows also takes waaaaay longer to load for some reason. Like 30-60 seconds instead of 5.
My System SpecsSystem Spec
08 Jun 2014   #25
Anilusion

Windows 7 Professional x64
 
 

Okay, I just got a BSOD with my sound card removed.
My System SpecsSystem Spec
08 Jun 2014   #26
Anilusion

Windows 7 Professional x64
 
 

And another one.
My System SpecsSystem Spec
08 Jun 2014   #27
Anilusion

Windows 7 Professional x64
 
 

I have also noticed that 2 of my harddrives are not being detected anymore... my G: and H: drives are gone, both are Samsung Spinpoint 500GB.
My System SpecsSystem Spec
08 Jun 2014   #28
derekimo

Microsoft Community Contributor Award Recipient

 
 

I have no idea what's happening with your drives.

The last one is blaming your realtek internet driver,

Code:
Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : hardware ( Rt64win7+1b428 )
Code:
fffff880`040d0000 fffff880`041b7000   Rt64win7 T (no symbols)           
    Loaded symbol image file: Rt64win7.sys
    Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
    Image name: Rt64win7.sys
    Timestamp:        Tue Apr 22 19:11:19 2014 (53572147)
    CheckSum:         000E7D7B
    ImageSize:        000E7000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
The one before that was a Bugcheck 50 with no specific driver being flagged,

I'll see if I can get someone else to look at this.
My System SpecsSystem Spec
08 Jun 2014   #29
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi Anilusion.

The diversity in the bugchecks and probable causes are somehow indicating that the issue may be hardware related. I see the mention of it in Derek's post #28 too.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Let us know the results.
My System SpecsSystem Spec
09 Jun 2014   #30
Anilusion

Windows 7 Professional x64
 
 

I'll run the test again, but here are the results from a few days ago. I don't have a picture of furmark but I ran it for a few hours with no issues.

Also, my drives are back after I left my computer off over the night.
My System SpecsSystem Spec
Reply

 Random BSODs after hardware upgrade




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSODs, possible faulty hardware but not sure...
Hi Everyone, My PC recently crashed, i.e. would not boot into Windows and I had to reinstall. I thought I may have fried the processor by overheating it (apparently I did not apply the thermal paste very effectively when I assembled this thing back in 2011...) but that does not seem to be the...
BSOD Help and Support
Random BSODs. Drivers are up to date and Hardware has gotten the A-OK
I reinstalled windows thinking the OS was eaten up by some magical virus. Updated all the drivers. I've Run Windows extended Memory diagnostic and tested the Hard drive both came back clear or errors. I am at my wits end. It is my first build only about 2 months old. BSOD started only this past...
BSOD Help and Support
New Hardware BSODs
Recently I had my PSU die and when removing it I cleaned out the computer, and either when the PSU died or when I was cleaning out the computer, my CPU died too. So I went out and bought a new PSU, CPU, Motherboard, and RAM. I installed it all, installed Windows 7, started installing my programs,...
BSOD Help and Support
New Hardware Same BSoDs
Hey everyone, Unfortunately, it looks like I'm back with blue screen errors again. Previously, I had updated all of my drivers, and when that failed I sent my computer back to the manufacturer for repairs. Both the motherboard and CPU were replaced and all seemed well until a little while ago. ...
BSOD Help and Support
NEW PC HARDWARE BSODS - minidumps in
Hi you all!! Well, I've had a lot of bsods. I've test hdd, ram, change cpu but they still here... So I need your help;) Bsods always happen after few minutes - three, four - system is logged. And, after first bsod, such restart means another bsod...:mad: So, I turn pc off and go to sleep. In...
BSOD Help and Support
BSODs...possibly hardware
I did an upgrade on a computer about a week ago. After about 4 days it started BSODing. It wa so bad that I couldnt get the minidump out and have tried reinstalling 7 and even the Vista factory image. However, it would BSOD before the image would fully load. Clearly this is a hardware issue though...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:35.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App