Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when going out of sleep

02 Jun 2014   #21
Daniol71

Windows 7 Home Premium 64bit
 
 

If I put my computer to sleep (to make the BSOD appear) while running DV, will the faulty driver be flagged or does it only work when you're logged in to the computer?


My System SpecsSystem Spec
.
02 Jun 2014   #22
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi Daniol71.

Make it sure that the SSD is running with the latest firmware.
Download V300_525fw_Win, for sv300s3 | Kingston Technology

It is important to know that whether the BSOD is appearing even with the latest SSD firmware applied or not.
My System SpecsSystem Spec
02 Jun 2014   #23
Daniol71

Windows 7 Home Premium 64bit
 
 

Hi Arc,

Thanks for the suggestion, the SSD was indeed in need of a firmware update. Sadly that didn't fix the BSOD problem :/
My System SpecsSystem Spec
.

02 Jun 2014   #24
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Daniol71 View Post
Hi Arc,

Thanks for the suggestion, the SSD was indeed in need of a firmware update. Sadly that didn't fix the BSOD problem :/
OK, do another thing.

Follow Power Plan Settings - Change. When you are in Step 5, apply this settings:

Attachment 320184

Also, post a screenshot of the SSD using CrystalDiskInfo - Software - Crystal Dew World
My System SpecsSystem Spec
02 Jun 2014   #25
Daniol71

Windows 7 Home Premium 64bit
 
 

Alright, done that, it would be annoying if the SSD is faulty since it's brand new
My System SpecsSystem Spec
02 Jun 2014   #26
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

The smart data looks good.

Does teh BSOD still happens at wake-up, after changing the power management setting for the SSD?

The SSD is brand new ... that is a good info. Was the situation the same before applying the SSD?
My System SpecsSystem Spec
02 Jun 2014   #27
Daniol71

Windows 7 Home Premium 64bit
 
 

I set the hard disk to never turn off like you said but the BSOD still happens like it used to.

Here's the thing though, before I had Win8 installed on an exact same model SSD and never had any of these issues. So my guess is either it's Win7 drivers that aren't installed or not working properly. But since my system for some reason can't make dump files, there's no way to find out.

When I first bought the laptop it had Win7 installed on a HDD. I didn't have this problem, but that's because it came straight from the factory. My guess is a fresh install would have caused the same thing back then :P
My System SpecsSystem Spec
03 Jun 2014   #28
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

A dump file is not needed to debug a stop 0xF4. A dump file will not give any more information other than the bugcheck code plus "probably caused by either wininit or csrss".

A stop 0xF4 is storage failure.

The only thing is uneven here that the storage failure occurs only when you are waking the computer up. That means, the disc goes to sleep, but fails to get the power back within the stipulated time. It is even interesting that the BSOD occurs even after you changed the power management policy.
Quote:
I set the hard disk to never turn off like you said but the BSOD still happens like it used to.
An exact same model worked good, that is not any guarantee that this one will also work good.
Quote:
Here's the thing though, before I had Win8 installed on an exact same model SSD and never had any of these issues.
Can you test the SSD in another computer? Or can you test another disk in this computer?

One more thing ..... as you installed the SSD yourself, make it sure that there is no loose connection. Open it and then re-seat it.

A stop 0xF4 is a storage related issue. Windows installation and drivers has nothing to do with it.
My System SpecsSystem Spec
03 Jun 2014   #29
Thedoctor44

 

Try these

1. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all drives'.

2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system log'.

3. Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
My System SpecsSystem Spec
03 Jun 2014   #30
Daniol71

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Arc View Post
A dump file is not needed to debug a stop 0xF4. A dump file will not give any more information other than the bugcheck code plus "probably caused by either wininit or csrss".

A stop 0xF4 is storage failure.

The only thing is uneven here that the storage failure occurs only when you are waking the computer up. That means, the disc goes to sleep, but fails to get the power back within the stipulated time. It is even interesting that the BSOD occurs even after you changed the power management policy.
Quote:
I set the hard disk to never turn off like you said but the BSOD still happens like it used to.
An exact same model worked good, that is not any guarantee that this one will also work good.
Quote:
Here's the thing though, before I had Win8 installed on an exact same model SSD and never had any of these issues.
Can you test the SSD in another computer? Or can you test another disk in this computer?

One more thing ..... as you installed the SSD yourself, make it sure that there is no loose connection. Open it and then re-seat it.

A stop 0xF4 is a storage related issue. Windows installation and drivers has nothing to do with it.
I'll check if the SSD is connected correctly and I'll also try with the original HDD that came with the laptop.

NOTE: The BSOD happens when I try to log in after sleep. Most of the time the login screen will show up, and when I click to login it will load for a couple of minutes and then the BSOD appears. Also, hibernation works fine so it sounds weird that it's hard disk related.
My System SpecsSystem Spec
Reply

 BSOD when going out of sleep




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Numerous BSOD's. Normally caused while in sleep / putting to sleep.
Hello Seveners! I have been having trouble with a BSOD for a while now. It is getting to that extent that I bare it any longer! I need help! Firstly, these BSOD's have been happening randomly, but normally the case is while it is in sleep, or when I put it to sleep, the screen will go black,...
BSOD Help and Support
BSOD - Won't sleep or crashes during sleep on Dell Latitude 6430u
Hi, I have a Dell Latitude 6430u running windows 7 64. When I first got it I worked through many BSOD issues and it was running fine for many many months. Now recently it started not sleeping, waking up by itself during sleep and waking up from sleep with an unexpected crash message. Any and...
BSOD Help and Support
BSOD while resuming from sleep, or not resuming from sleep at all
My system was never able to resume from sleep. Tried several things, BIOS settings, settings for power management etc. Thought it could be related to recovery software or other installed drivers etc. But now: I replaced my harddisk with a SSD, did a fresh install of W7 Ultimate 64. Removed all...
BSOD Help and Support
GA-EP35-DS3L sleep and KVM switch wakes comp from sleep
Hi All, I have two systems a N650SLI-DS4 and a GA-EP35-DS3L hooked up to a Trednet KVM switch. If I put the GA-EP35-DS3L to sleep and switch to the N650SLI-DS4, the GA-EP35-DS3L system wakes up. The only way I have been able to keep it in sleep is if I hold the switch for the N650SLI-DS4 while...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App