Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random 0xB8 BSOD

02 Jun 2014   #1
seaves88

Windows 7 Home Premium 64 bit
 
 
Random 0xB8 BSOD

Hello all! I just recently built a custom computer for my office to replace our old Compaq that kept locking up because the processor was going out. I cloned the HDD to a new SSD and ran sysprep before installing it in the newly built rig. I had also installed windows the SSD beforehand so I could make sure everything worked correctly before trying the clone.

Everything ran great for a couple of days and then it started suffering from random BSODs. I viewed all the dumps in bluescreen viewer and almost all seem to be being thrown by different drivers. I would wipe the computer and start from a fresh install except that we have older programs that we have to use that we no longer know where the product keys are.

I used DM Log Collector to make the zip file and have attached it. Any help I get would be much appreciated.

Thanks in advance


My System SpecsSystem Spec
.
03 Jun 2014   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi seaves88.

Either update Acronis or uninstall it.

Let us know the result.
_________________________
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 100000B8, {fffffa8006fbd660, fffffa8006f6a550, 0, 0}

*** WARNING: Unable to verify timestamp for snapman.sys
*** ERROR: Module load completed but symbols could not be loaded for snapman.sys
Probably caused by : snapman.sys ( snapman+18e71 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

ATTEMPTED_SWITCH_FROM_DPC (b8)
A wait operation, attach process, or yield was attempted from a DPC routine.
This is an illegal operation and the stack track will lead to the offending
code and original DPC routine.
Arguments:
Arg1: fffffa8006fbd660, Original thread which is the cause of the failure
Arg2: fffffa8006f6a550, New thread
Arg3: 0000000000000000, Stack address of the original thread
Arg4: 0000000000000000

Debugging Details:
------------------


OVERLAPPED_MODULE: Address regions for 'nvlddmkm' and 'nvlddmkm.sys' overlap

FAULTING_THREAD:  fffffa8006fbd660

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0xB8

PROCESS_NAME:  rundll32.exe

CURRENT_IRQL:  2

ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre

DPC_STACK_BASE:  FFFFF80000BA2FB0

LAST_CONTROL_TRANSFER:  from fffff800034df992 to fffff800034dceda

STACK_TEXT:  
fffff800`00ba24d0 fffff800`034df992 : fffffa80`07be0d01 fffffa80`06fbd660 00000000`00000002 fffffa80`00000007 : nt!KiSwapContext+0x7a
fffff800`00ba2610 fffff800`034e21af : fffffa80`07c65aa8 00000000`00000001 fffff800`00000000 00000000`00000000 : nt!KiCommitThreadWait+0x1d2
fffff800`00ba26a0 fffff880`01915e71 : fffff880`01928100 fffff880`00000000 00000000`00000000 fffffa80`07c88b00 : nt!KeWaitForSingleObject+0x19f
fffff800`00ba2740 fffff880`01928100 : fffff880`00000000 00000000`00000000 fffffa80`07c88b00 fffff800`0364ce80 : snapman+0x18e71
fffff800`00ba2748 fffff880`00000000 : 00000000`00000000 fffffa80`07c88b00 fffff800`0364ce80 fffff880`01928140 : snapman+0x2b100
fffff800`00ba2750 00000000`00000000 : fffffa80`07c88b00 fffff800`0364ce80 fffff880`01928140 fffffa80`07e186f8 : 0xfffff880`00000000


STACK_COMMAND:  .thread 0xfffffa8006fbd660 ; kb

FOLLOWUP_IP: 
snapman+18e71
fffff880`01915e71 ??              ???

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  snapman+18e71

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: snapman

IMAGE_NAME:  snapman.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  45265d99

FAILURE_BUCKET_ID:  X64_0xB8_snapman+18e71

BUCKET_ID:  X64_0xB8_snapman+18e71

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:x64_0xb8_snapman+18e71

FAILURE_ID_HASH:  {89089437-cc69-08df-df5e-4415624b389b}

Followup: MachineOwner
---------

0: kd> lmvm snapman
start             end                 module name
fffff880`018fd000 fffff880`01930000   snapman  T (no symbols)           
    Loaded symbol image file: snapman.sys
    Image path: \SystemRoot\system32\DRIVERS\snapman.sys
    Image name: snapman.sys
    Timestamp:        Fri Oct 06 19:13:53 2006 (45265D99)
    CheckSum:         000375F1
    ImageSize:        00033000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
04 Jun 2014   #3
seaves88

Windows 7 Home Premium 64 bit
 
 

Hey Arc,
I tried uninstalling it and it makes the computer crash every time I restart it until I restore it to before the uninstall.
My System SpecsSystem Spec
.

04 Jun 2014   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Try in safe mode?
My System SpecsSystem Spec
06 Jun 2014   #5
seaves88

Windows 7 Home Premium 64 bit
 
 

I tried safe mode and it wouldn't let me uninstall. I finally got it to uninstall during normal boot and was able to go through the registry and delete the leftover keys that evidently cause it to not be able to boot after uninstalling Acronis. It has been running for about 5 hours without a crash so hopefully that fixed it. Thank you for your help Arc! I will be letting it run all weekend and check on Monday to see if it crashed
My System SpecsSystem Spec
07 Jun 2014   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Good news.

Let us know how the computer is running. And let us know about any further issue.
My System SpecsSystem Spec
09 Jun 2014   #7
seaves88

Windows 7 Home Premium 64 bit
 
 

Ok I left it running all weekend and when I got in to work this morning it was still going with no crashes so looks like that fixed it! Thank you so much for your help Arc!
My System SpecsSystem Spec
09 Jun 2014   #8
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

You are welcome mate.

Let us know for any further issue.
My System SpecsSystem Spec
Reply

 Random 0xB8 BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD after start and Random stuck on windows logo screen
Heyy.. So yesterday due to a sudden power outage (happens allot here), my windows started behaving erratically. First when the power came on my windows 7 ultimate 64 bit, was stuck on windows logo. i waited for about 20 mins and it was still stuck. The HDD read activity light on my casing was...
BSOD Help and Support
Random BSOD problems in the past 2 days. Random errors at random times
Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty...
BSOD Help and Support
BSOD at seemingly random times, memory dump blaming random drivers
I've been plagued by odd problems since making this custom build about a month ago, but the latest is the increasing frequency of BSODs. They never occur at load (gaming with high end specs), but often occur at shutdown (forcing a restart before I can then actually shut down). I normally boot into...
BSOD Help and Support
Random BSOD at random moments on Toshiba L500 laptop; graphics card?
My GF has had a Toshiba L500 laptop for 4 years now. It's a great model and it worked well...till now. It started about two weeks ago, with 1 blue screen every 1-2 days. I haven't reinstalled her windows for about a year, so i figured that was the problem. Four days ago it started blue...
BSOD Help and Support
Random BSOD with random error code at random moment
Hello Ok now i'm out of solution so i come here hoping that someone could help me I always had bsod hapening randomly but not like the this week I got 2 bsod/day when i'm playing, when i'm staring at my monitor or even when i'm sleeping with random error code like 0x1e, 0x24, 0x3b, 0x4a or 0xa...
BSOD Help and Support
BSOD clicking folders in file explorer, STOP 0xb8
I have a new (about two weeks old) Dell XPS 14 which is randomly getting BSODs, most of which occurred shortly after double-clicking on folders in file explorer. BlueScreenView blames ntoskrnl.exe, iusb3xhc.sys, iusb3hub.sys, rdwm1098.sys or some combination of those for the crashes. The...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:18.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App