BSOD Intermittent issues with errors 0x0000001a and 0x0000004e


  1. Posts : 1
    Windows 7 Home Premium 64bit
       #1

    BSOD Intermittent issues with errors 0x0000001a and 0x0000004e


    Hi guys. First time user of these forums. There will be random times during the middle of using Skype and playing games such as Diablo 3 or Wildstar that suddenly I will get a BSOD. It has been happening for the past 5 months or so and has happened now 6 total times using the error codes 0x0000001a and 0x0000004e.

    I have attached the file named debug-Daniel-PC-xxxx.zip as shown in the instructions to get any feedback you guys can offer. The error codes above happen half the time, so 0x0000001a occurred 3 times, and 0x0000004e occurred 3 times as well.

    Please let me know if I can provide any other helpful information or if you guys can determine a root cuase.
    Last edited by Ambasabi; 04 Jun 2014 at 02:10. Reason: Concerned that file name was incorrect, so re-uploaded file.
      My Computer


  2. Posts : 15,026
    Windows 10 Home 64Bit
       #2

    Welcome to the forum Ambasabi,

    Reduce items at start-up:

    Perform a clean boot:

    Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

    The goal is to test all the RAM sticks and all the motherboard slots.

    Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

    If you get errors, stop the test and continue with the next step.

    1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
    *Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
    If this stick passes the test then go to step #3.

    2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
    *If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
    *If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
    3. Test the next stick of RAM (stick #2) in the next motherboard slot.
    *If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
    *If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
    4. If you find a stick that passes the test, test it in all the other motherboard slots.

    If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

    In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
       Information
    Errors are sometimes found after 8 passes.

       Tip
    Do this test overnight, before going to bed.

    Code:
    Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    
    
    Loading Dump File [C:\Users\admin\Downloads\DANIEL-PC-Wed_06_04_2014__10648_74\060114-10514-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    
    Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is: 
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS Personal
    Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
    Machine Name:
    Kernel base = 0xfffff800`03860000 PsLoadedModuleList = 0xfffff800`03aa3890
    Debug session time: Mon Jun  2 08:55:21.397 2014 (UTC + 6:00)
    System Uptime: 0 days 19:51:47.475
    Loading Kernel Symbols
    ...............................................................
    ................................................................
    .............................................
    Loading User Symbols
    Loading unloaded module list
    .....
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 1A, {41201, fffff68000288968, 9020000079260867, fffffa800fc47d00}
    
    Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+13702 )
    
    Followup: MachineOwner
    ---------
    Code:
    Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    
    
    Loading Dump File [C:\Users\admin\Downloads\DANIEL-PC-Wed_06_04_2014__10648_74\051414-10701-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    
    Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is: 
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS Personal
    Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
    Machine Name:
    Kernel base = 0xfffff800`03005000 PsLoadedModuleList = 0xfffff800`032486d0
    Debug session time: Thu May 15 07:15:44.784 2014 (UTC + 6:00)
    System Uptime: 0 days 21:07:28.032
    Loading Kernel Symbols
    ...............................................................
    ................................................................
    ..........................................
    Loading User Symbols
    Loading unloaded module list
    ..........
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck 4E, {99, 1ae414, 2, b093}
    
    Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )
    
    Followup: MachineOwner
    ---------
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 11:48.
Find Us