Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD With no Apparent Trend

16 Jun 2014   #11
Taniss99

Windows 7 Ultimate 64 bit
 
 

There's nothing with volt values in the left most column :/


My System SpecsSystem Spec
.
18 Jun 2014   #12
Taniss99

Windows 7 Ultimate 64 bit
 
 

I'm still blue screening, with two more BSODs, each with a new error code. Don't know what to make of them.
I had a day or so without any blue screens where just before I had reinstalled the majority of my drivers, but that evidently didn't work as I just blue screened repeatedly recently. I wasn't doing anything different during that time as far as I know, as well. And I'm fairly certain it's not a heat issue, as during that time my heat was higher than it normally is, as the other day the outside temperature was extraordinarily hot, and now I have the AC on. But none of this actually indicates the the problem actually is.
My System SpecsSystem Spec
18 Jun 2014   #13
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Quote   Quote: Originally Posted by Taniss99 View Post
There's nothing with volt values in the left most column :/
Sorry late reply I still do not understand why that HW Info is not showing up the 12v rail?? especially in that section or anywhere.

Are you able to check the volts with digital multimeter at the 24 pin power socket??
see this excellent tutorial PSU - Test DC Output Voltage
My System SpecsSystem Spec
.

18 Jun 2014   #14
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Quote   Quote: Originally Posted by Taniss99 View Post
There's nothing with volt values in the left most column :/
Sorry late reply I still do not understand why that HW Info is not showing up the 12v rail?? especially in that section or anywhere.

Are you able to check the volts with digital multimeter at the 24 pin power socket??
see this excellent tutorial http://www.sevenforums.com/tutorials/301799-psu-test-dc-output-voltage.html
My System SpecsSystem Spec
Reply

 BSOD With no Apparent Trend




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Ransom BSOD's for no apparent reason/each one is different
For no apparent reason PC suddenly started BSOD'ing about 4 mos ago. The initial 50 or so referenced ntoskrnl.exe+75bcv0 but there were others in between randomizing it so that could not lock it down. Did Memtest86 etc. Memory is fine, ran tests on HDD everything was fine. Done every single thing I...
BSOD Help and Support
BSOD all the time for no apparent reason
Hi I have a custom built PC Windows 7 x 64bit which just keeps freezing after a few minutes of using it for no apparent reason. Error message here any help appreciated because when it works its a cracking little PC :D Thanks in advance to all you very cleaver people.
BSOD Help and Support
Apparent random BSOD issue
Hi all, Attached are the files required as per your sticky in this thread. As far as I remember ever since I built my PC 2 months or so ago I've had this issue. But recently it's becoming worse (specs are in my profile). Just to add, I have an Avermedia C985 Live Gamer capture card. This...
BSOD Help and Support
BSOD getting more frequent... no apparent pattern to when it happens.
Hi all, I've been getting a BSOD about once every week or so, but the last couple of days it has gotten to be more frequent, happening a couple of times yesterday and again today. I did use windbg to look at my dumpfiles, and it appears to be the same cause each time... I will let you...
BSOD Help and Support
BSOD with no apparent cause, PFN list corrupt.
I randomly BSOD'd due to 'PFN_LIST_CORRUPT' and I can't find any apparent reason. Poking around on Google made me realize it may be due to a bad driver, but I lack the technical expertise to figure out which driver it is. Anyway, I ran to SF Diagnostic Tool as requested and uploaded the info....
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:01.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App