Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: PFN_LIST_CORRUPT BSOD, Driver Verifier BSOD

19 Jun 2014   #31
Onision

Windows 7 Home Premium 64bit
 
 

Hm....speccy says my ram timing is different than what the manufacture suggests, could this be it?


My System SpecsSystem Spec
.
19 Jun 2014   #32
Onision

Windows 7 Home Premium 64bit
 
 

So i brought the voltages down from 1.650 to 1.5 and the timing is now correct! Hopefully i can use this ram to its full potential. I never messed with those setting before, it must have been running like that since i built it in 2011. Hopefully this put an end to the bluescreens. I will memtest it overnight!
My System SpecsSystem Spec
19 Jun 2014   #33
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Set Your timings to 9-11-9-27 and voltage at 1.5V (Dram Voltage) and frequency to 1866. or You can enable XMP in bios. I prefer to set BIOS to manual and set everything myself, but I'm a control freak.
My System SpecsSystem Spec
.

19 Jun 2014   #34
Onision

Windows 7 Home Premium 64bit
 
 

I actually set the voltage back to 1.65 because thats what patriot printed on the ram, newegg is false with its 1.5v claim. Currently running memtest, 1 pass so far with 0 errors. I noticed a whole bunch of other timing settings, do I have to worry about those? I only changed the primary timings. Also what should my 5th command timing be? I have it set to auto but I can
pick between 1-3 also
My System SpecsSystem Spec
19 Jun 2014   #35
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If you are talking about 1T or 2 T, 2T is usually more stable than 1T. I've never heard of 3T. I hope that's what you are asking. Go with what is printed on the ram modules, they will be correct. Newegg lists the timings as 9-11-9-27 and I would use 2T as it's more stable, but if you set it at 1T and can pass, you are good. Use the 1.65V for Dram Voltage if that's printed on the modules. If you set it before at 1866 and 9-9-9-24 at 1.5V, that may very well be why you were having BSODs. The Voltage and timings has to be right. any more questions, just ask.
My System SpecsSystem Spec
19 Jun 2014   #36
Onision

Windows 7 Home Premium 64bit
 
 

Im hoping it will fix the bsod, but the thing is it also passed memtest 13 times running at 9-9-9-24. I think the old voltage was also 1.65
My System SpecsSystem Spec
19 Jun 2014   #37
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

But, if I understand you correctly, it passed with those timings at 1333, you are now running at 1866, I believe. That's a big difference. And I hope you set the correct timings for 1866. Ram will run right at certain frequency and timings. When you change the frequency, you almost always have to change the timings and voltage. For example, your ram will also run correctly at 1600, but the timings and usually voltage will be different than the timings at 1333 or 1866. Ram is extremely picky and everything has to be right.
My System SpecsSystem Spec
19 Jun 2014   #38
Onision

Windows 7 Home Premium 64bit
 
 

13 passes were with the 1866mhz. For a long time this ram was running at 1333 but after I set it to 1866 the bsods started happening. But now im hoping the slightly tweaked timing and voltage would make a difference
My System SpecsSystem Spec
19 Jun 2014   #39
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I hope it will also. Let us know how it turns out.
My System SpecsSystem Spec
19 Jun 2014   #40
Onision

Windows 7 Home Premium 64bit
 
 

14 passed, 19 hours of testing now we wait for the next bsod....
My System SpecsSystem Spec
Reply

 PFN_LIST_CORRUPT BSOD, Driver Verifier BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Fairly Often. Driver Verifier Enabled = BSOD on Boot Every Time
I have a relatively new computer that I've built and I've been getting BSOD's for a while. At first I thought it was because the pagefile was disabled, but that was just why they weren't getting logged to MiniDump. Then I got it enabled again and now I'm getting a lot of BSODs. It's been 0x3b...
BSOD Help and Support
Multiple BSOD. Driver Verifier Driver caught a driver corrupting
I have had BSOD for a while and being super busy I did not have time to look at it and get it fixed. Well Being a computer guy I assumed I could fix it myself. But with tons of research and trying to use every guide I can find I decided to try here(probably should have came here first). Today I...
BSOD Help and Support
BSOD-PC Freezes randomly-Driver Verifier BSOD's at User Log-On
Hello, As the thread shows im having lots and lots of little(and big) crashes. Im attaching the SF log and any help will be appreciated Many thanks, Dimitris
BSOD Help and Support
Random BSOD, ran driver verifier now got 0x000000c9 BSOD
Hi All Have been following a number of threads to identify my issue. I can only assume that a driver is at fault as when i run verifier i have to start in safe mode. Attached is my mini dump, can anyone help me identify where the issue is? Thanks a lot Lordmwa EDIT - Added the full lot...
BSOD Help and Support
BSOD's in driver verifier, BSOD's on C:/ disk check (os hdd) & more.
Recently my computer has started seriously acting up by first disabling all directx and d3d functionality it took a full driver uninstall and reinstall to make that functional again but my computer is still having bsod issue's I don't understand where this came from it happened out of nowhere my...
BSOD Help and Support
Driver verifier BSOD
System will randomly lockup. It is very sporadic and I have tested vga, ram, and cpu using prime95, memtest as well as memtest86, furmark used for vga. 7hrs and 7 full runs of memtest 86, 0 errors. I feel hardware is solid. Upon enabling driver verifier the system bluescreens before even...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:55.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App