Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD random even when system idle all drivers BIOS current PLease help

21 Jun 2014   #31
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

And that was through uninstalling the XHCI controller?


My System SpecsSystem Spec
.
21 Jun 2014   #32
NoSuRReNDeR

Windows 7 Pro 64bit
 
 

Yes ... I went back to current drivers and did some research.... I found a firmware upgrade and i just installed that.

Updated USB 3.0 Firmware - X79 FTW/Classified - EVGA Forums

Hopefully that does the trick.
My System SpecsSystem Spec
21 Jun 2014   #33
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

I certainly hope it does mate. Please keep us informed either way.
My System SpecsSystem Spec
.

22 Jun 2014   #34
NoSuRReNDeR

Windows 7 Pro 64bit
 
 

And...... nope ;( the mystery deepens... Still crashing on shut down.
My System SpecsSystem Spec
22 Jun 2014   #35
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

You're having no luck with this ASMedia controller mate. It's still definitely that that's causing the issue.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800f1ec8e0, fffff800085fc3d8, fffffa80138b46d0}

*** WARNING: Unable to verify timestamp for asmthub3.sys
*** ERROR: Module load completed but symbols could not be loaded for asmthub3.sys
Probably caused by : asmthub3.sys

Followup: MachineOwner
---------

0: kd> !irp fffffa80138b46d0
Irp is active with 10 stacks 9 is current (= 0xfffffa80138b49e0)
 No Mdl: No System Buffer: Thread 00000000:  Irp stack trace.  
     cmd  flg cl Device   File     Completion-Context
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

            Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

            Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

            Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

            Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

            Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

            Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

            Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

            Args: 00000000 00000000 00000000 00000000
>[ 16, 2]   0 e1 fffffa800f1f48c0 00000000 00000000-00000000    pending
           \Driver\asmthub3
            Args: 00016600 00000001 00000004 00000006
 [  0, 0]   0  0 00000000 00000000 00000000-fffffa800f5b3830    

            Args: 00000000 00000000 00000000 00000000
0: kd> !drvobj \Driver\asmthub3
fffff80003e8c1d0: Unable to get value of ObpRootDirectoryObject
Driver object \Driver\asmthub3 not found
Do you have any peripherals plugged into your USB 3.0 ports?
My System SpecsSystem Spec
22 Jun 2014   #36
NoSuRReNDeR

Windows 7 Pro 64bit
 
 

I did have a 360 controller plug and the wifi adapter but it doesnt matter if I take them out it still crashes regardless. Could it be a setting issue in the Bios for USB 3.0 ? Its weird that the old drivers cause an issue on those 2 hubs....

I think this may be a better/more recent driver...

--6/24/2013 --

Ill try it and see if it still hangs.

http://www.usb3-drivers.com/getfile.php?iddrv=58
My System SpecsSystem Spec
22 Jun 2014   #37
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Yeah I've got to admit I'm scratching my head on this one. I'm going to have to do some more digging and see what I can find mate.
My System SpecsSystem Spec
22 Jun 2014   #38
NoSuRReNDeR

Windows 7 Pro 64bit
 
 

I thought i figured it but I was wrong... thought maybe the cable was on upside... flipped it... still crashes on shutdown.... FML
My System SpecsSystem Spec
22 Jun 2014   #39
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

OK, something might finally be giving.

Code:
0: kd> !devobj fffffa800f1f2970
Device object (fffffa800f1f2970) is for:
 InfoMask field not found for _OBJECT_HEADER at fffffa800f1f2940
 \Driver\asmthub3 DriverObject fffffa800f166970
Current Irp 00000000 RefCount 0 Type 00008600 Flags 00002040
DevExt fffffa800f1f2ac0 DevObjExt fffffa800f1f2c20 
ExtensionFlags (0x00000800)  DOE_DEFAULT_SD_PRESENT
Characteristics (0x00000080)  FILE_AUTOGENERATED_DEVICE_NAME
AttachedDevice (Upper) fffffa800f1f1d40Unable to load image \SystemRoot\system32\DRIVERS\vl810filter.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for vl810filter.sys
*** ERROR: Module load completed but symbols could not be loaded for vl810filter.sys
 \Driver\vl810filter
AttachedTo (Lower) fffffa800f1cecd0 \Driver\asmthub3
Device queue is not busy
Try updating the driver for VIA Labs VL810 Superspeed USB Hub Controller Filter Driver here.

It's old.

Code:
0: kd> lmvm vl810filter
start             end                 module name
fffff880`163f3000 fffff880`163fb000   vl810filter T (no symbols)           
    Loaded symbol image file: vl810filter.sys
    Image path: \SystemRoot\system32\DRIVERS\vl810filter.sys
    Image name: vl810filter.sys
    Timestamp:        Mon Dec 06 03:00:01 2010 (4CFC51B1)
    CheckSum:         0000FB98
    ImageSize:        00008000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
23 Jun 2014   #40
NoSuRReNDeR

Windows 7 Pro 64bit
 
 

OK so I tried that newer USB hub thing the link is for a firmware updater and .....facepalm.We seem to be at square one again. ONly thing that works is disabling all my USB 3.0 in the BIOS... and on this board its basically every usb port on the back except the mouse and keyboard...
My System SpecsSystem Spec
Reply

 BSOD random even when system idle all drivers BIOS current PLease help




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
USB device over current status detected, can't enter BIOS.
Okay so yesterday I was making music and had just finished when my mouse started to be really sluggish. I turned the computer off and then back on. I now get the message: "USB device over current status detected" Here's an image:...
Hardware & Devices
Random idle BSOD
Hey all, Been getting this for the past few months, longer than the minidumps I've recorded. Seems to be only when I've got firefox open (from memory) and doing nothing intensive. Never had a crash while gaming etc. I used to get a BSOD that was Norton related. I removed Norton and it stop, but...
BSOD Help and Support
Random BSOD while idle.
Computer Specs http://i49.tinypic.com/14t7u53.png Few weeks ago I created a thread about my constant BSOD I did everything asked now I got a random BSOD I'm not to sure why I'm hoping you guys can answer this. The reason for my passed BSOD all the time is listed below: Beforehand my...
BSOD Help and Support
Random reboots when system is idle
Is Windows 7 . . . - x86 (32-bit) or x64 ? x64 - the original installed OS on the system? YES - an OEM or full retail version? Retail OEM - OEM = came pre-installed on system - Full Retail = you purchased it from retailer - What is the age of system (hardware)? 3 years old - What is the...
BSOD Help and Support
Random BSOD, cant pin down, happens even while system idle
Having random crashes and restarts. Cant find a cause, cant figure out how to read the bsod error report, otherwise I would stop bothering you guys on here. Crashed many times last few days even while idle, and while internet browsing. Deleted the earlier dumps so I can have a smaller managable...
BSOD Help and Support
Random BSODs when system is Idle.
Ok I have read the instructions so hoping I have everything you need. The BSODs are random but seem to happen only when the system is idle/unattended. As if I am using it the machine seems to run fine, but leave it idle for a while or leave it playing music and it will just restart. I disabled the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App