BSOD on different Games

We need more information to analyze your logs. Follow Blue Screen of Death (BSOD) Posting Instructions, let the tool run until it has completely finished and then upload the new logs.

1: Aviva antivirus is causing problems.

Code:

fffff880`08dc01a8  fffff880`03b27c8fUnable to load image \SystemRoot\system32\DRIVERS\avipbb.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avipbb.sys
*** ERROR: Module load completed but symbols could not be loaded for avipbb.sys
 avipbb+0x9c8f

Uninstall Aviva and install MS Security Essentials and MalwareBytes.

   Note

Make sure you uncheck the 'Enable Free Trial' box when installing.

2: Your other logs are showing signs of hardware errors although I'm not picking up exactly what. Follow the trouble shooting steps below.

If you're overclocking your system, revert back to stock clocks now.

Run Prime95 to stress test your CPU. Hardware - Stress Test With Prime95

   Warning

Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them.

Run MemTest86+ to analyse your RAM. RAM - Test with Memtest86+

   Note

MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here.

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use

Run Furmark to stress test your GPU. Video Card - Stress Test with Furmark

   Note

Run Furmark for around 30 minutes.

   Warning

Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them.

I'll ask an overclocker come and take a look to give you some guidance.

PPC17, who did you buy it from and is it still under warranty? Some manufacturers void your warranty if you bother their overclock settings.

Please completely as possible, fill out your system specs. You can go to your last post and in the bottom left click 'My System Specs' there will be a link there to fill out your system specs, complete with Manufacturer, model number of each component. Just be sure to click Save at the bottom of the page. If you would like to know what we want, you can click My System Specs at the bottom left of this post and see mine. If you don't know your specs, this will help you System Info - See Your System Specs

Also please download and install, if you don't already have it, CPUz (http://www.cpuid.com/softwares/cpu-z.html) and post screenshots (Screenshots and Files - Upload and Post in Seven Forums) of the CPU tab, Mainboard tab, Memory Tab, and the SPD tab. On the SPD tab, you can select each Dimm Slot by a dropdown box in the upper left of that tab. We only need the Dimm slots that are populated with ram.

OK 2 questions. You had previously mentioned having 2 kinds of ram. You are only showing 2 dims. Am I correct that you removed the other 2 sticks? Well, maybe 3 questions. I have not used the Haswell CPUs, but supposedly they are lower voltage than the Ivy Bridge. For 4.6 your vcore is way too high. My 3770K can run 5GHz with less voltage. Also, have you noticed a lack of performance with your graphics card? If not, you should have. Your card is running at X4 rather than X16.

I realize the system was built by someone else. Most times, changing BIOS settings and working on the inside of the computer will void your warranty. I would suggest you get on the phone with your manufacturer and have a long talk with them and ask exactly what you can do without voiding the warranty and ask them to send that to you in writing. But, before you do that please download and install GPUz, open it and show me a screenshot of the main tab and the sensor tab. I would like one shot while running at idle and another while running Ungine Heaven using the extreme preset. I will show you how to set it up. Also, please tell me the manufacturer and model of your card, I want to be able to look it up and see the specs.
DOWNLOADS - Both programs are free. Just use the basic Heaven program
GPUz
Downloads | techPowerUp
Ungine Heaven
Download Heaven Benchmark | Unigine: real-time 3D engine (game, simulation, visualization and VR)

The set up is simple, just set it up like this, but make sure you watch the temps.You can right click on the title bar of GPUZ and select 'always on top" and set it to the sensor bar before you start heaven. Once Heaven loads, click benchmark in the top left corner and see if it runs OK and if you get any artifacts. Again, stop the test if your card gets too hot. This is the set up, which is simple
Attachment 322017

Just click run, when it is loaded and starts running click benchmark. It will give the card a good workout.