Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD sleep mode, possible issue with Galaxy S3 Driver, error 1033

27 Jun 2014   #1
herschen

Windows 7 Home Premium 64-bit
 
 
BSOD sleep mode, possible issue with Galaxy S3 Driver, error 1033

I've been having periodic BSOD issues. I've uploaded the dump file and a screen shot of the blue screen app. Here's the bullet points (so it's easier to digest):
  • Windows 7, Version 6.1.7601.2.1.0.768.3
  • Locale ID: 1033
  • always related to irql_not_less_or_equal, ntoskrnl.exe (except for the 2nd to last one, which had to do with NTFS)
  • This makes me believe it's hard drive failure, but I'm leaving chkdsk /r until the last minute
  • I thought it might have something to do with the USB WD External hard drive, but I ran chkdsk /r on that drive, didn't find any issues and the last BSOD happened after I unplugged the drive.
  • The last BSOD occurred right after I put the computer in sleep mode and had my Galaxy S3 hooked up charging.
  • Unfortunately, I do not remember if the previous BSOD events happened when the computer was in sleep mode or when I had my phone charging.
  • I am going to run memtest and also attempt to upgrade the graphics drivers, but I'm hoping someone here can say 'Bingo!" it's this driver.



My System SpecsSystem Spec
.
27 Jun 2014   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Configure the system to collect Small Memory Dumps following: Dump Files - Configure Windows to Create on BSOD
My System SpecsSystem Spec
28 Jun 2014   #3
herschen

Windows 7 Home Premium 64-bit
 
 

The BSOD happened last night when I put it into sleep mode w/o the phone charging. And I ran memtest the night before and came up with errors. Please do not respond yet, as I am going to replace the memory and upload a small memory dump if/when it happens again. I am pretty sure the reason for the BSOD only happening in sleep mode is that Windows attempts to save the system state to memory and freezes up when it can't. Regardless of the reason for the BSOD, I will be replacing the RAM. Thanks.
My System SpecsSystem Spec
.

Reply

 BSOD sleep mode, possible issue with Galaxy S3 Driver, error 1033




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD when waking computer up from sleep/Hibernation - error:1033
So I have been having this problem for a few months now, but am only now getting around to fixing it. (I procrastinate and have no problem just leaving it on constantly; which is what I did after this problem arose.) Like the title suggests, this ONLY happens when I bring the computer out of a...
BSOD Help and Support
BSOD sleep mode, Locale ID 1033,
Every few weeks when I put my computer into sleep mode, it gives me a BSOD with Local ID 1033. Windows 7, Version 6.1.7601.2.1.0.768.3 Locale ID: 1033 always related to irql_not_less_or_equal, ntoskrnl.exe (except for the 2nd to last one, which had to do with NTFS) This makes me believe it's...
BSOD Help and Support
BSOD entering sleep mode, points to ntoskrnl.exe driver
Last night I went to put my computer to sleep and right after the monitor went to sleep the computer hung for a sec and then BSOD (waking monitor). So I left it off and figured I would look at it in the morning. This morning I wake up and restart and everything seems fine, walk away to make food...
BSOD Help and Support
BSOD During Sleep Mode - Driver State Power Failure
Hello, all. Every now and again my laptop BSOD's when I leave it on sleep mode over night. Today the laptop lit up and started running while it was closed and I opened it to see the Driver_State_Power_Failure error message. Attached are the files gained from the SF Diagnostics Tool. Any help is...
BSOD Help and Support
BSOD after sleep mode, error DRIVER POWER STATE FAILURE 0x0000009f
Hello all This is my first post in here. Please bear over with my English – it is not my native language. My problem is on a Media Centre machine where I recently upgraded Motherboard and processor. I have the following setup on the machine: SILVERSTONE Grandia 04 DeZen PSU 500 Watt,...
BSOD Help and Support
BSOD after Itunes Update - Locale ID: 1033, Bad Driver - No Safe Mode
Hi - I need help with a BSOD and subsequent boot failure. Windows Startup Repair can't fix the computer automatically and I'm at a loss. The problem occurred after I updated to the latest version of Itunes a few days ago. Sorry forum - This post doesn't follow the BSOD posting instructions....
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:44.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App