Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 4th install. Progressive increase of BSOD over time


4 Weeks Ago   #11

Windows 7 Home Premium 64 bit SP1
 
 

Back to it again this morning. Results show errors on

test 8, pass 9. 0013ff99eb8-5119.5 MB, Good 00008000, Bad 00008800. Error bits 800, count of 1, CPU 0.
0013fe45eb8-5118.3 MB, Good 00008000, Bad 00008800, Error bits 800, count of 2, CPU 0.
Looks like I'll start my "one at a time" process now. Yes, I know... I should have done it from the start, but going from immediate red to no immediate errors on the initial round of musical cards, I thought I could pull it off.

Jeff

My System SpecsSystem Spec
.

3 Weeks Ago   #12

Windows 7 Home Premium 64 bit SP1
 
 
Test complete

10 passes each in slot A with cards A and B revealed no errors. 10 passes with card A in slot B revealed no errors. One error cropped up in slot B with card B on the fifth pass. Currently on the 12th pass.

Test 8, Pass 5, Address 0014a520b68 - 5285.0MB, Good 00002000, Bad 00002400, Err bits, 400, count 1, CPU 0

Is this an acceptable level, or is zero error the only thing acceptable? I can take a photo of the screen and post it if needed.

Jeff
My System SpecsSystem Spec
3 Weeks Ago   #13

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate SP1 X64 (Windows 8.1, Linux Mint, Windows XP and others in VM)
 
 

No screen shot is really necessary, but 1 error is a fail. When you run these tests, if you get an error, you ban stop the test, its a fail so no since running it any more.
My System SpecsSystem Spec
.


3 Weeks Ago   #14

Windows 7 Home Premium 64 bit SP1
 
 

Placed card A into socket B again. Popped up 2 errors before completing the 5th pass. So then, am I looking at a socket perhaps? I'll be heading over to the Asus website next for warranty info.
My System SpecsSystem Spec
3 Weeks Ago   #15

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate SP1 X64 (Windows 8.1, Linux Mint, Windows XP and others in VM)
 
 

Maybe I'm not understanding it correctly, but as I'm seeing it, you may have a bad ram stick and not a dim slot bad. Again, maybe I'm not quite understanding you. Typically, if you have a bad slot, all the ram cards will pass in other slots but fail in that 1 slot.
My System SpecsSystem Spec
3 Weeks Ago   #16

Desk1 8 Pro / Desk2 7 Home Prem / Laptop 8.1 Pro all 64bit
 
 

As essenbe says mate if I am seeing it right then card A in slot 1 or 2 or 3 or 4 is ok but with card B it has errors in any of the slots?

In any case you still have 8GB of RAM (I am presuming you have only two cards?) then it should run the machine quite well unless you are doing something mega heavy with RAM?
My System SpecsSystem Spec
3 Weeks Ago   #17

Windows 7 Home Premium 64 bit SP1
 
 

Errors occurred in slot B with both cards A and B.
My System SpecsSystem Spec
3 Weeks Ago   #18

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate SP1 X64 (Windows 8.1, Linux Mint, Windows XP and others in VM)
 
 

Did they pass in the other slots?
My System SpecsSystem Spec
3 Weeks Ago   #19

Windows 7 Home Premium 64 bit SP1
 
 

Both cards passes in slot A. As an aside, Asus has slots A1, A2, B1, and B2, and recommends using A2 and B2 when using 2 cards, and slot A1 when using one card. It does not say why, but only shows the images of installing in those slots. I intend on asking them about this come "regular business hours". I will, however, try putting a single card in slot A1 and running the machine.

Would it behoove me to attempt another scannow with the single card?
My System SpecsSystem Spec
3 Weeks Ago   #20

Desk1 8 Pro / Desk2 7 Home Prem / Laptop 8.1 Pro all 64bit
 
 

Yes mate my board has the same config of slots and personally I would just use one stick in a slot that throws no errors for the time being as I am not sure if there would be any conflict by using the slots "out of sync" as it were ie using one card in slot A1 and one in B2.
Otherwise it looks like that slot B (1 or 2?) is bad.
My System SpecsSystem Spec
Reply

 4th install. Progressive increase of BSOD over time




Thread Tools



Similar help and support threads for2: 4th install. Progressive increase of BSOD over time
Thread Forum
progressive and recurring BSOD errors (volmgrx, fvevol, msrpc).sys BSOD Help and Support
Solved How to increase font size on Win7 Date & Time? General Discussion
Gradual Progressive physical memory usage increase until BSOD BSOD Help and Support
Trying to increase my boot time Performance & Maintenance
increase screen saver time Customization

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:56 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33