BSOD After Video Streaming and Playing Games

Hi, everyone. Just when I thought my BSOD issues from last year were solved, they've seemed to pop up again. This time, I'm mainly experiencing issues with "IRQL_NOT_LESS_OR_EQUAL" and ntoskrnl.exe. I'm hoping that it's a software error like a driver rather than a hardware one. These BSODs mainly occur after a lengthy amount of time streaming videos and playing computer games.

I'll be sure to stress test my CPU, RAM, and GPU soon. For now, attached are my SF Diagnostic files. Thank you in advance.

Normally with these dumps I would say a system driver is using wrong pointers but because it's so consistent I think otherwise.

Code:

BugCheck A, {3, 2, 0, fffff800032d7785}

Given that the address being referenced was 3 it's pretty clear that it's invalid memory, I believe the first accessible address which is used for user mode at boot is 0x10000 although I might be slightly off with that one.

Again another IP misalignment...

Code:

BugCheck D1, {1, 2, 0, fffff88001887e85}

Again an invalid memory address was referenced.

Code:

BugCheck 9C, {0, fffff88002f6db70, 0, 0}

Code:

2: kd> !mca fffff88002f6db70
Machine Check feature not present
CP  F/M/S Manufacturer  MHz PRCB Signature    MSR 8B Signature Features
 2  6,58,9 GenuineIntel 3400 0000001200000000                   21193ffe

On X64 systems to use the !mca command I believe I need to acquire private HAL symbols which I'm struggling to find at this moment in time if they're available to the public.

A machine check exception from my experience is quite rare as it's not common for one to be called if its bad RAM.
Nevertheless I think its best we test RAM first.

   Information

Download it here:

Memtest86+ - Advanced Memory Diagnostic Tool

Which one should I download?

You have two options to choose from, you can either download the ISO version then burn it do a CD and boot it from there.
The other option is downloading the auto installer for USB sticks, you then boot from that USB stick.
Be warned though, it will format your USB then install the files needed to make it bootable so any files left over will be wiped off.

So how does it work?

It works by writing a series of test patterns to most memory addresses over 9 tests, it then reads the data back to compare it for errors.

The default pass does 9 different tests varying in access patterns and test data. A tenth pass is optional from the menu which writes all the memory in zeroes then sleeps for 90 minutes and compares it to see if any address have changed, this takes 3 hours per pass each time.

My memtest86 isn't booting! What should I do?

This can be caused by a number of different reasons, common ones include your BIOS not setting using the correct settings, you might want to change your boot priority order.
Other causes include your motherboard not supporting bootable USB sticks in which case you'll need to use a CD (or floppy drive).

Any other issues you might want to look here:

FAQ : please read before posting

If bad RAM isn't found then I suggest you remove these programs as I've seen uncountable cases where these have caused BSODs.

Code:

Start Menu\Programs\ASUS\AI Suite II	Public:Start Menu\Programs\ASUS\AI Suite II	Public
Start Menu\Programs\DAEMON Tools Pro	Public:Start Menu\Programs\DAEMON Tools Pro	Public

AI Suite is bloatware that can even set improper BIOS timings, try removing the CMOS battery then placing it back in which might be the cause of the problem.
Daemon Tools causing BSODs by using a bad driver that likes to misbehave in random ways, mainly using bad pointers and accessing memory it shouldn't.