BSOD after rendering in Sony Vegas Pro 12, starting pro 13

Can you run the long generic test in DOS to prevent this problem.

The bugcheck is still the same indicating a disk I/O error.

Code:

EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.

Thedoctor44 said:

Can you run the long generic test in DOS to prevent this problem.

The bugcheck is still the same indicating a disk I/O error.

Code:

EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.

Hmmm. When I try to burn a disc, I get an error saying, "Error Burning CD/DVD: Hardware Error 9216"

I'll see if I can burn this file from my laptop and then follow through with the instructions.

What CD burning software are you using?

Thedoctor44 said:

What CD burning software are you using?

I've attempted to use Active ISO Burner and Free ISO Burner.

I would remove all CD burning software apart from one, as long as it isn't Daemon Tools if you still have it installed as it causes BSODs.

Unfortunately, after 15 minutes my computer will BSOD regardless of what I do. I'm going to purchase a few burnable CDs to follow through with the previous instructions.


Here's an updated list of Minidump files, for anyone interested.

Results of the long tests have been posted below; please excuse the poor image quality (taken on my Android). Both hard-drives passed. Not sure how to proceed.

I tried to launch the SeaTools ISO again on startup, but I received a very odd error showing an indented line of purple squares. Completely on a whim, I decided to run MemTest86+ to see if I had faulty RAM. Sure enough, I started getting errors. I'm going to start swapping out different sticks of ram to see what's causing the problem.