New
#11
Lots of troubles. Here's another SF report.
Lots of troubles. Here's another SF report.
No memory problems it seems.
Edit: If it's of any help, programs randomly stop responding.
Last edited by lukloko; 06 Jul 2014 at 14:16.
The PC just turned off without even haveng a bsod this time.
Correct slot? I didn't know that was a thing... :x Which one is the correct one?
The test reported no errors after 8 passes. It did, however, state that my memory runs at 667 Hz, which confuses me.
I could translate the log, if you tell me where to find it.
The correct slot will be described in your motherboard manual. There's usually specific slots for single and multiple modules.
667Hz is 1333 for DDR modules.
Look in the EventSys.txt file you uploaded. Look for messages relating to disk errors.
Your last dump indicated a disk error. See the last few lines of the stack below.
Code:STACK_TEXT: fffff880`03108b58 fffff800`02e0c903 : 00000000`00000124 00000000`00000000 fffffa80`07fde028 00000000`bf800000 : nt!KeBugCheckEx fffff880`03108b60 fffff800`029a3513 : 00000000`00000001 fffffa80`0702f510 00000000`00000000 fffffa80`0702f560 : hal!HalBugCheckSystem+0x1e3 fffff880`03108ba0 fffff800`02e0c5c8 : 00000000`00000728 fffffa80`0702f510 fffff880`03108f30 fffff880`03108f00 : nt!WheaReportHwError+0x263 fffff880`03108c00 fffff800`02e0bf1a : fffffa80`0702f510 fffff880`03108f30 fffffa80`0702f510 00000000`00000000 : hal!HalpMcaReportError+0x4c fffff880`03108d50 fffff800`02e0bdd5 : 00000000`00000008 00000000`00000001 fffff880`03108fb0 00000000`00000000 : hal!HalpMceHandler+0x9e fffff880`03108d90 fffff800`02dffe88 : 00000000`00000000 fffff8a0`0bddf140 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55 fffff880`03108dc0 fffff800`0288d7ac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40 fffff880`03108df0 fffff800`0288d613 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c fffff880`03108f30 fffff880`012dd037 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x153 fffff880`0a869cf0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : Ntfs!NtfsQueryNameInfo+0x147
That is a really intimidating number of events.
Any keywords I could look for? Sorry, I'm not very computer educated....
I searched for 'disk' (in portuguese, the language windows is in) but only found entries related to defragmentetion.
I forget the exact wording of the messages. You might try searching for 'error'. If I recall correctly, the disk may be described as a Device rather than Disk. If it made it to the log, the last dump showed a disk error so it will be toward the end of the log.