Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New build BSOD 0x0000124 Blue screen crash - DM log uploaded!

14 Jul 2014   #111
Paulgo253

Windows 7 Professional 64 bit
 
 

Cheers - sorry I think our posts crossed but thanks for your help with the PSU's - never given them much thought up to now - wont make that mistake again!!


My System SpecsSystem Spec
.
14 Jul 2014   #112
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

No problem. Just the PSU is the heart of your system, everything in your computer depends on continuous clean power from the PSU to work. The PSU is the last component in your computer you should try to save money on. I am the first to realize that money can be tight, But, you are better off waiting a month or so to build and getting a quality PSU than putting a lower end PSU in and build now. I would never put a low end PSU in my computer, no matter what. I just threw away a 600 Watt low end PSU I was given in another working computer.
My System SpecsSystem Spec
18 Jul 2014   #113
Paulgo253

Windows 7 Professional 64 bit
 
 

Latest Update - Antec PSU arrived and installed (wow - what a piece of kit, I so now appreciate the differences between a good PSU and a cheap budget one!!)

BUT....made no difference - blue screen crash 5 mins in. Then crashed in safe mode and just about immediately after 7 loads from that point.....

Running the Prime95 test as you suggested Steve- but it's when running XP (32 bit) as the system isn't stable enough under 7. CPU Temps from Core Temp are steady at 60 and 57 for the two cores (max is 105). Ben running couple of hours and seems to have passed everything so far.

Not tried to install 7 on the XP drive as it crashes when running the install dvd.

Tried booting with DVD writer un-hooked so only the 7 hard drive was really connected - still blue-screened.

So the only things I havn't changed are the CPU and m/b.Only other thing is the case and the connections to the switches / front usb etc. They can be a bit temperamental. But still crashed when I disconnected the front usb's from the board and the reset switch

Needless to say XP on the other Sumsung F3 hard drive continues to run rock solid.....
My System SpecsSystem Spec
.

18 Jul 2014   #114
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Paul, I'm close to officially stumped. Please tell me which sata ports on the the board are the drives connected to? The sata ports should be labeled in very small print on the board. If not, the manual will tell you the port numbers. Also, when you get through, please go on the windows 7 board and run the
Blue Screen of Death (BSOD) Posting Instructions And post the results with your next post .
My System SpecsSystem Spec
18 Jul 2014   #115
Paulgo253

Windows 7 Professional 64 bit
 
 

Hi Steve - The 7 drive is on SATA 0, the XP drive is on SATA1, the smaller 300 gb drive is SATA 3 (although this is not connected usually) and the DVD is SATA 4. I'm sure that I've swapped sata ports occasionally to no effect but will try again!

The Prime95 test has been running for about four hours now. All the test have passes as best I can tell.

thanks
My System SpecsSystem Spec
18 Jul 2014   #116
Paulgo253

Windows 7 Professional 64 bit
 
 

Oh - should've said cpu temps are more or less steady at 62 for core 1 and 56 for core 2
My System SpecsSystem Spec
18 Jul 2014   #117
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

That's good. Prime will tell you if an error is found. Look at Core temp and it will tell you the temp and load on each core. The load should always be 100% on both cores during prime. I always keep core temp open and CPUz open on the CPU tab while running prime. CPUz will tell you the voltage and the clock speed while prime is running. Your temps are real good, it sounds like. If Prime throws an error it will usually but not always turn red, or the icon un the task bar will. The ports I asked about are right. Which prime test are you running and how much longer do you plan on running it?
My System SpecsSystem Spec
18 Jul 2014   #118
Paulgo253

Windows 7 Professional 64 bit
 
 

I was running the stress test you suggested I've just closed it to boot from the 7 drive to try and run the SF diagnostic tool to post the logs (as per your previous post) but it crashed before I could get anything! TI has passed everything up to that point, CU temps were stable and no errors anywhere.

Also tried booting with the 7 drive in sata port 1 and it made no difference
My System SpecsSystem Spec
18 Jul 2014   #119
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Are you ready to get your hands dirty?
My System SpecsSystem Spec
18 Jul 2014   #120
Paulgo253

Windows 7 Professional 64 bit
 
 

yes - no problem! What do you want me to do?
My System SpecsSystem Spec
Reply

 New build BSOD 0x0000124 Blue screen crash - DM log uploaded!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Blue Screen (SF diagnostic folder uploaded in the post)
Hello, my computer crashes very often (say once a day) since, I would say, a couple of weeks. I always get the following error: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 I have followed the BSOD instructions and uploaded the files...
BSOD Help and Support
N/build all games crash to desktop or give me a blue screen
Hey guys, Got a new home build Core I5 3rd gen at 4.4GB 8gb RAM, 120 SSD with the OS, 2GB HDD for anything else, ATI 7970. Win 7 home 64 bit. When I play games, I can play for a while, then I get Game name has stopped working, or a BSOD, he's the zipped fold as requested, thanks everyone.
BSOD Help and Support
BSOD Blue Screen Crash
Is Windows 7 Home Premium x64 It's the original installed OS Full Retail version The age of system is 1 year The OS is 1 year old and i didn't re-installed it. It crashes whenever I play a game or I watch a movie.
BSOD Help and Support
BSOD ...blue screen crash ...
these crashes are happened so frequently ....please help OS : windows 7 ultimate x64 cpu: intel core2due E7500 2.93 GHz memory : 4 GB graphic cards : Nvidia Gforce 9500 GT hard drive : 500 GB dmp files in the attachment thank you for your time
BSOD Help and Support
BSOD Crash!Blue screen occured while installing windows!!
HI,guys! Im new to computers,when i got the BSOD,i just installed the windows again and agin!But it turns out, doesnt work at all!Sometimes,when i was installing,it popped up a BSOD,and i need to try again and again until the installation is done.So im thinking this is a hardware issue!! I...
BSOD Help and Support
Blue screen error every morning(uploaded DMP files)
EDIT: Took it back to where i bought it and they changed my Motherboard to a GA-P55-USB3 and the problem seems to have gone. They weren't sure if it was a faulty motherboard or compatibility issues. They ran something called a burning test and they were getting similar messages got to do with...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App