Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New build BSOD 0x0000124 Blue screen crash - DM log uploaded!

06 Jul 2014   #11
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Any news on those temps yet Paul?


My System SpecsSystem Spec
.
06 Jul 2014   #12
Paulgo253

Windows 7 Professional 64 bit
 
 

Hi - running windows 7 the pc's not been stable enough to get any readings! IT's crashing just about as soon it loads, not much better under safe mode. But using the second hard drive and booting up in XP the CPU temps seem to be around 35 - 43. The hard drive temps are 28-30, On the psu it's showing 7.8v on the 12v rail - I suspect that is not good?! But with the same hardware the system is stable on the XP h/d

thanks

Paul
My System SpecsSystem Spec
06 Jul 2014   #13
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

The temperatures look good but that reading on the 12v rail isn't good. How old is the PSU? And when is your new one due?
My System SpecsSystem Spec
.

06 Jul 2014   #14
Paulgo253

Windows 7 Professional 64 bit
 
 

would it help to upload screen grabs? - but these are when running XP not 7. I left the pc off for over an hour and it still crashed almost as soon as it loaded windows 7
My System SpecsSystem Spec
06 Jul 2014   #15
Paulgo253

Windows 7 Professional 64 bit
 
 

Sorry - just seen your reply. PSU is a good 3-4 years old. It came from my son's pc when he was having problems. I wasn't running much hardware so let him have mine! I'm running 3 hard drives now tho and increased to 8gb ram (I've not enough connections to run the graphics card and more than 1 hard drive at the same time!!)

Should have new psu by weds!
My System SpecsSystem Spec
06 Jul 2014   #16
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Yeah post the screenshots Paul and I'll ask my hardware expert mate to drop in and talk about PSUs. He'll give you much better advice on that front than I will but I'll stick around too.
My System SpecsSystem Spec
06 Jul 2014   #17
Paulgo253

Windows 7 Professional 64 bit
 
 

Hi - I've attached some screen grabs of Speccy and HW Monitor from when running in XP - and thanks again for your help - much appreciated!!!
My System SpecsSystem Spec
06 Jul 2014   #18
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Essenbe will be along shortly to give you the lowdown Paul but I think it's safe to say your PSU is nailed, or as good as anyway mate. You should be seeing something like this.

Attachment 324509
My System SpecsSystem Spec
06 Jul 2014   #19
Paulgo253

Windows 7 Professional 64 bit
 
 

Cheers - well at 300w is was too low on power anyway but i didn't realise how badly it was performing!!
My System SpecsSystem Spec
06 Jul 2014   #20
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Well, I'm not really a hardware expert, and have never claimed to be. First I have to say something is real wrong. Every program you showed me showed your +12V as 7.8-7.9. I would not believe that the computer could boot at those voltage levels. ATX standards are +/- 5%, so you are way out of acceptable range on that. Your CPU, while acceptable, the temps are a little on the high side, but that may be because of the Stock cooler. They leave a lot to be desired.

You have 8 GB of ram, but you are showing XP as a 32 bit OS, X86 (32bit) cannot address more than about 3.5-3.7 GB.

If you could, please go into BIOS and see if you have a monitoring section and tell me the readings for the +12V, +5V, and +3.3V. Also, before you buy Ram be sure to check your manual. See how much ram your board can use. I have a rig that runs that CPU and the most that board can address is 1GB per dim slot, I'm pretty sure. Also check on the specs of the ram for your board (frequency, timings and Voltage). You are always better off using a kit of ram as they are tested to work well together where individual sticks are not. Be sure to go with a Major Manufacturer too.

But, I am not sure why XP will run and windows 7 won't. While XP utilizes less resources than W7, it is still using the same hardware. When you installed Windows 7, did you have the XP drive connected?

Also, if your BIOS confirms your +12V reading, my first move would buy an new quality brand of PSU. A PSU is not the place to skimp on money. a cheap PSU will in many cases not put out what it claims to and will not have the safety features of a quality brand. And, yes, they are more expensive, but well worth it. I always recommend Seasonic, Corsair, Antec and XFX. Those are all quality brands and can be used if you decide to do a new build. You may keep that in mind when buying. Size cannot be too large, really. You will only use what your computer needs, but will always leave room for upgrades, will run cooler and last longer. BTW, of the brands I mentioned, Seasonic makes many of them and they are rebranded. When you get ready to buy, let us know and we can advise you. Plus, a Modular PSU will make the build a whole lot easier. Just a few facts to keep in mind. BTW, where you are from, I understand Be Quiet is a big name. They have just started to make an entry to the US, so I know very little about them. But, I do have a few friends in the UK and they have told me they were very good, but I have no personal experience with them nor have I heard very much about them.
My System SpecsSystem Spec
Reply

 New build BSOD 0x0000124 Blue screen crash - DM log uploaded!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Blue Screen (SF diagnostic folder uploaded in the post)
Hello, my computer crashes very often (say once a day) since, I would say, a couple of weeks. I always get the following error: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 I have followed the BSOD instructions and uploaded the files...
BSOD Help and Support
N/build all games crash to desktop or give me a blue screen
Hey guys, Got a new home build Core I5 3rd gen at 4.4GB 8gb RAM, 120 SSD with the OS, 2GB HDD for anything else, ATI 7970. Win 7 home 64 bit. When I play games, I can play for a while, then I get Game name has stopped working, or a BSOD, he's the zipped fold as requested, thanks everyone.
BSOD Help and Support
BSOD Blue Screen Crash
Is Windows 7 Home Premium x64 It's the original installed OS Full Retail version The age of system is 1 year The OS is 1 year old and i didn't re-installed it. It crashes whenever I play a game or I watch a movie.
BSOD Help and Support
BSOD ...blue screen crash ...
these crashes are happened so frequently ....please help OS : windows 7 ultimate x64 cpu: intel core2due E7500 2.93 GHz memory : 4 GB graphic cards : Nvidia Gforce 9500 GT hard drive : 500 GB dmp files in the attachment thank you for your time
BSOD Help and Support
BSOD Crash!Blue screen occured while installing windows!!
HI,guys! Im new to computers,when i got the BSOD,i just installed the windows again and agin!But it turns out, doesnt work at all!Sometimes,when i was installing,it popped up a BSOD,and i need to try again and again until the installation is done.So im thinking this is a hardware issue!! I...
BSOD Help and Support
Blue screen error every morning(uploaded DMP files)
EDIT: Took it back to where i bought it and they changed my Motherboard to a GA-P55-USB3 and the problem seems to have gone. They weren't sure if it was a faulty motherboard or compatibility issues. They ran something called a burning test and they were getting similar messages got to do with...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App