Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD BCCode F4

07 Jul 2014   #1
GravityzCatz

Windows 7 Home Premium x64
 
 
Random BSOD BCCode F4

This has been a problem for the last few days. I cleaned out my PC with some compressed air, closed everything back up and since then I have had these BSOD. Normally the thing will just do a hard crash and not even display the BSOD screen. This last time I got lucky and decided this was beyond my knowledge sphere. so here are the files it generated. Someone who can intemperate these things, have fun.

**EDIT** Attached correct documents. Sorry about improper format. I literally made this account today.


My System SpecsSystem Spec
.
07 Jul 2014   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

You may go back inside the computer and see if you accidentally knocked a wire loose. Check the cables on both ends of the hard drives as well as reseating the ram modules. Check all the wiring, it's easy to move something or knock something loose without realizing it.

Also please follow these instructions Blue Screen of Death (BSOD) Posting Instructions
My System SpecsSystem Spec
07 Jul 2014   #3
GravityzCatz

Windows 7 Home Premium x64
 
 

Sorry about that. Long time reader, first time poster. I attached the right stuff this time.
My System SpecsSystem Spec
.

07 Jul 2014   #4
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

GravityzCatz, I'll look at it again tomorrow, but the dump files are not giving me much to go on. As I stated above I would check the wiring to the hard drives and the memory. I'm getting some references to I/O data and memory issues. There are several mentions of the MSAHCI, which is Microsoft's AHCI driver. With that coupled with the I/O data, it leads me to believe there is a problem with the hard drive.

Also, don't worry about the forgotten file. That's no problem at all.

Code:
---- ETW minidump data unavailable-----
KERNEL_LOG_FAILING_PROCESS:  <NULL>
PROCESS_OBJECT: fffffa800efc2870
IMAGE_NAME:  csrss.exe
DEBUG_FLR_IMAGE_TIMESTAMP:  0
MODULE_NAME: csrss
FAULTING_MODULE: 0000000000000000 
PROCESS_NAME:  csrss.exe
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR:  0xF4_c0000005
Code:
---- ETW minidump data unavailable-----
KERNEL_LOG_FAILING_PROCESS:  
PROCESS_OBJECT: fffffa800eeafb30
IMAGE_NAME:  wininit.exe
DEBUG_FLR_IMAGE_TIMESTAMP:  0
MODULE_NAME: wininit
FAULTING_MODULE: 0000000000000000 
PROCESS_NAME:  wininit.exe
EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.
BUGCHECK_STR: 0xF4_IOERR
At this point I would run Western Digitals' diagnostic program from DOS running the short and long tests. WD Support / Downloads / SATA & SAS / WD Black
I think you may also need to run Checkdisk


I would also run the system file checker, which will test the system files for any missing or corrupted files SFC /SCANNOW Command - System File Checker
My System SpecsSystem Spec
08 Jul 2014   #5
GravityzCatz

Windows 7 Home Premium x64
 
 

I ran all 3 scans and they all came back clean. No errors. I also disconnected my hard drive and reconnected it to a different SATA port on my MoBo just to see if that helps. I also reseated the RAM. Lets hope thats all that was wrong with it. If it crashes again, i will post the new log.
My System SpecsSystem Spec
08 Jul 2014   #6
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

OK, just let me know. We'll hope for the best.
My System SpecsSystem Spec
08 Jul 2014   #7
GravityzCatz

Windows 7 Home Premium x64
 
 

Alright, I still got crashes happening. I had two today. Here are the logs.
My System SpecsSystem Spec
08 Jul 2014   #8
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Give me a minute tolook at the files
My System SpecsSystem Spec
08 Jul 2014   #9
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I still believe that you dislodged some of the ram or the wiring when you were cleaning out the computer. It is easy to do, I've done it myself. I would check the wiring on everything, especially the hard drives and I would completely remove the ram, after turning the computer off and draining any residual power, and reinstall it. You are still getting I/O errors which means data cannot be read to or from your hard drives. This can also be caused by ram. If you still can't find it
Please Run Memtest86+

information   Information
Please download from this site http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you mat have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask.

Also run the sfc /scannow and the checkdisk with the /f /r switches again from a command prompt in the link I provided above.
My System SpecsSystem Spec
Reply

 Random BSOD BCCode F4




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD, BCCode: 124
Hi, I was trying to change connection of my external fan which was previously connected to power supply. I connected it on motherboard. Since then I face with BSOD which occurs randomly. Problem signature: Sorunlu Olay Adı: BlueScreen OS Sürümü: 6.1.7601.2.1.0.256.1 Yerel...
BSOD Help and Support
Random BSOD's BCCode: 1e
Hello, I'm getting the past few weeks random BSOD's. The BSOD error screen is in dutch. ------------------------------------------------------------------------------------------------------- Probleemhandtekening: Gebeurtenisnaam van probleem: BlueScreen Versie van...
BSOD Help and Support
BSOD random, BCCode f4
I have a Lenovo ThinkCentre M90Z running Windows 7 Pro SP1 (64 bit) at the office. It's about a year old and has a custom image for my company. This is something that keeps happening randomly. I won't even be doing anything on my computer and it will crash, BSOD, and reboot asking me if I want...
BSOD Help and Support
BSOD often and random, BCCode: fe
BSOD While working on MS excell/word and browsing online. Report error 0x0000007F (0x00000000000000008, 0x0000000080030033, 0x00000000000406F8, 0xFFFFF800002F08B50) Specifications: Windows 7 professional 64 bit 8Gb RAM 128GB SSL Intel core 1.5 6months old (November 2011)
BSOD Help and Support
Random BSOD - BCCode: f4
Please someone help me. I have experienced the BSOD three times in the last few weeks and it happened again there now. The details of the last dump are below: Problem Signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 2057 Additional Information about the...
BSOD Help and Support
Random BSOD: BCCODE 50
Hello all, I am getting BSODs and I do not know what else to do. I tried everything that came up to my mind. Brief history of the issue: Had Windows Vista installed and decided that would be good to update to Windows 7. I replaced my old hard drive (fully functional) with a SSD (just for the OS)...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 19:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App