Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x1000007e for ntoskrnl.exe after Sys Recovery Disks reinstall

07 Jul 2014   #1
Zarathud

Windows 7 Professional 64-bit SP1
 
 
BSOD 0x1000007e for ntoskrnl.exe after Sys Recovery Disks reinstall

Dell XPS 435T/9000 with Win 7 64-Bit

I was having all kinds of BSOD and system freezing issues so I decided to do a re-install 2 days ago from my system recovery disks to return to a factory image. I had some issues with the monitor blanking as reported here. I got the system up, updated drivers from the Dell site, and having been letting the windows updates install. I installed a few programs, but not too many.

Today the system froze while working on it so I had to reboot manually using the power button. It booted into Windows and I started working again, but the screen blanked out within a few minutes and the system rebooted itself. During reboot, while loading Windows a blue screen appeared, cycled through and then restarted Windows again.

Any help would be appreciated.

I have uploaded the SF Diagnostics files for review.


My System SpecsSystem Spec
.
07 Jul 2014   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Please remove BitDefender and use MSE in its place.

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability
compared to other antivirus or internet security software. It is free and lightweight:-
warning   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.


Free up the start-up, nothing except the antivirus is usually needed.Check for heating issues using Speccy or HWMonitor. Upload a screen shot with either of the tools: Run Disk Check on your Hard Drive for file system errors and bad sectors on it:Upload a screenshot of your hard disk using Crystal Disk Info:Make a hard drive test from the hard drive manufacturers website:Test your Hard Drive with SeaTools:Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Memtest should be done overnight.

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\admin\Downloads\zarathud\SF_07-07-2014\070714-14133-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`02c4c000 PsLoadedModuleList = 0xfffff800`02e8f890
Debug session time: Tue Jul  8 06:55:13.520 2014 (UTC + 6:00)
System Uptime: 0 days 0:00:27.551
Loading Kernel Symbols
...............................................................
................................................................
...
Loading User Symbols
Loading unloaded module list
...
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff80002ce7150, fffff880030be5c8, fffff880030bde20}

Probably caused by : rdyboost.sys ( rdyboost!ST_STORE<SMD_TRAITS>::StDmCurrentRegionSet+9b )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80002ce7150, The address that the exception occurred at
Arg3: fffff880030be5c8, Exception Record Address
Arg4: fffff880030bde20, Context Record Address

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP: 
nt!MiReplenishPageSlist+c0
fffff800`02ce7150 f00fba6b1000    lock bts dword ptr [rbx+10h],0

EXCEPTION_RECORD:  fffff880030be5c8 -- (.exr 0xfffff880030be5c8)
ExceptionAddress: fffff80002ce7150 (nt!MiReplenishPageSlist+0x00000000000000c0)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT:  fffff880030bde20 -- (.cxr 0xfffff880030bde20)
rax=fffffa8009d43740 rbx=fffef281d7ca5c00 rcx=0000058000000000
rdx=0000000000000050 rsi=0000000000000002 rdi=000000000000000e
rip=fffff80002ce7150 rsp=fffff880030be800 rbp=fffffa80088404f0
 r8=fffff80002efc500  r9=fffffa8009c00000 r10=000000000033ffff
r11=0000000000000000 r12=fffff80002efc500 r13=2aaaaaaaaaaaaaab
r14=fdffffffffffffff r15=0000058000000000
iopl=0         nv up ei pl nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010202
nt!MiReplenishPageSlist+0xc0:
fffff800`02ce7150 f00fba6b1000    lock bts dword ptr [rbx+10h],0 ds:002b:fffef281`d7ca5c10=????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  2

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ef9100
GetUlongFromAddress: unable to read from fffff80002ef91c0
 ffffffffffffffff 

FOLLOWUP_IP: 
rdyboost!ST_STORE<SMD_TRAITS>::StDmCurrentRegionSet+9b
fffff880`013bbfd3 488be8          mov     rbp,rax

BUGCHECK_STR:  0x7E

LAST_CONTROL_TRANSFER:  from fffff80002de44fc to fffff80002ce7150

STACK_TEXT:  
fffff880`030be800 fffff800`02de44fc : fffffa80`09c00aa0 00000000`00000010 00000000`00000044 00000000`00000044 : nt!MiReplenishPageSlist+0xc0
fffff880`030be870 fffff800`02de4d11 : 00000000`00000080 00000000`00000020 00000000`00000000 00000000`0033ffff : nt!MiAllocateMdlPagesByLists+0x60c
fffff880`030be9a0 fffff800`02de5619 : 00000000`00000001 fffffa80`0ae7a000 00000000`00000474 00000000`00000001 : nt!MiAllocatePagesForMdl+0x451
fffff880`030bea90 fffff880`013bbfd3 : fffffa80`0ae78118 fffff880`013c9519 00000000`00000001 fffff880`056ef000 : nt!MmAllocatePagesForMdlEx+0x89
fffff880`030bead0 fffff880`013c93da : fffffa80`0ae78118 fffffa80`0ae78118 fffff880`030bc3e0 fffffa80`0ae78118 : rdyboost!ST_STORE<SMD_TRAITS>::StDmCurrentRegionSet+0x9b
fffff880`030beb30 fffff880`013c759e : fffffa80`0ae78118 00000000`00000010 00000000`00000010 00000000`00000001 : rdyboost!ST_STORE<SMD_TRAITS>::StDmpSinglePageFindSpace+0x4a
fffff880`030beb60 fffff880`013c6773 : fffffa80`0c47d150 fffffa80`0cf06170 00000000`00000000 fffffa80`0ae78118 : rdyboost!ST_STORE<SMD_TRAITS>::StDmpSinglePageAdd+0x2e
fffff880`030bec20 fffff880`013c662e : fffffa80`0c47d150 00000000`00010000 00000000`00000080 fffffa80`0ae780b0 : rdyboost!ST_STORE<SMD_TRAITS>::StDmPageAdd+0xe3
fffff880`030bec80 fffff880`013c541a : fffffa80`0c47d150 00000000`00000080 00000000`00000080 fffffa80`0ae78f88 : rdyboost!ST_STORE<SMD_TRAITS>::StWorkItemProcess+0x23a
fffff880`030bece0 fffff800`02f5d73a : 00000000`00000000 fffff800`00000000 fffffa80`0ad50b50 fffffa80`09d43740 : rdyboost!SMKM_STORE<SMD_TRAITS>::SmStWorker+0x152
fffff880`030bed40 fffff800`02cb28e6 : fffff800`02e3ce80 fffffa80`0ad50b50 fffff800`02e4acc0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`030bed80 00000000`00000000 : fffff880`030bf000 fffff880`030b9000 fffff880`030be810 00000000`00000000 : nt!KxStartSystemThread+0x16


SYMBOL_STACK_INDEX:  4

SYMBOL_NAME:  rdyboost!ST_STORE<SMD_TRAITS>::StDmCurrentRegionSet+9b

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: rdyboost

IMAGE_NAME:  rdyboost.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4ce7982e

STACK_COMMAND:  .cxr 0xfffff880030bde20 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_rdyboost!ST_STORE_SMD_TRAITS_::StDmCurrentRegionSet+9b

BUCKET_ID:  X64_0x7E_rdyboost!ST_STORE_SMD_TRAITS_::StDmCurrentRegionSet+9b

Followup: MachineOwner
---------
My System SpecsSystem Spec
08 Jul 2014   #3
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Interesting KK as I asked for the memtest, HDD test and chkdsk stuff in the other thread but it wasn't followed up.
I also suggested a clean install using Greg's tutorial as it seemed to me the disks being used were somehow "off".
I wish I could read the dump files properly as I am sure there must be stuff in there.
My System SpecsSystem Spec
.

08 Jul 2014   #4
Zarathud

Windows 7 Professional 64-bit SP1
 
 

Quote   Quote: Originally Posted by ICit2lol View Post
Interesting KK as I asked for the memtest, HDD test and chkdsk stuff in the other thread but it wasn't followed up.
I also suggested a clean install using Greg's tutorial as it seemed to me the disks being used were somehow "off".
I wish I could read the dump files properly as I am sure there must be stuff in there.
I had recently run chkdsk and seatools on the drive and both passed without issue. I had also recently run a memtest with the diagnositics from the F12 menu and that did not return any error. I was planning to initiate the other memtest last night when I got the blue screen, which is why I started a second thread.

I took the box offline last night as I want to open it, clean it (which hasn't been done in awhile, if ever), make sure everything is seated properly, and then I will start running some of these tests over the next few days.
My System SpecsSystem Spec
08 Jul 2014   #5
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Quote   Quote: Originally Posted by ICit2lol View Post
Interesting KK as I asked for the memtest, HDD test and chkdsk stuff in the other thread but it wasn't followed up.
I also suggested a clean install using Greg's tutorial as it seemed to me the disks being used were somehow "off".
I wish I could read the dump files properly as I am sure there must be stuff in there.
My apologies/
My System SpecsSystem Spec
10 Jul 2014   #6
Zarathud

Windows 7 Professional 64-bit SP1
 
 

I opened and cleaned the box, which was very dusty inside. It seems to be running noticeably quieter since the cleaning.

I then ran HWMonitor CPUID, CrystalDiskInfo, Chkdsk, and Seatools for Dos and did not see any issues. See attached.

Will run the Memtest starting tonight.
My System SpecsSystem Spec
11 Jul 2014   #7
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Quote   Quote: Originally Posted by koolkat77 View Post
Quote   Quote: Originally Posted by ICit2lol View Post
Interesting KK as I asked for the memtest, HDD test and chkdsk stuff in the other thread but it wasn't followed up.
I also suggested a clean install using Greg's tutorial as it seemed to me the disks being used were somehow "off".
I wish I could read the dump files properly as I am sure there must be stuff in there.
My apologies/
No worries and Zarathud mate the volts look ok but the temps on the cores seem to be a little on the high side for my liking although I suppose it does depend on the ambient temperature of where you are.

As suggested by Kool Kat that memtest will be interesting to see the results.
My System SpecsSystem Spec
11 Jul 2014   #8
Zarathud

Windows 7 Professional 64-bit SP1
 
 

Quote   Quote: Originally Posted by ICit2lol View Post
No worries and Zarathud mate the volts look ok but the temps on the cores seem to be a little on the high side for my liking although I suppose it does depend on the ambient temperature of where you are.

As suggested by Kool Kat that memtest will be interesting to see the results.
I ran 9 passes on the Memtest with no errors. See attached.

Ambient temperature is abut 75 F at peak during the day, although the box sits inside a computer desk (open front) so it is probably a little bit higher. I ran CPUID HW Monitor again after completing the Memtest (30 hours) and results are attached.
My System SpecsSystem Spec
12 Jul 2014   #9
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

After looking at the memtest and the HW Info readout I still think the cores are a little on the high side I know the memtest is probably not that accurate but if you take the mid way point between the HW and memtest results you are getting around 78C.
That would have me changing the compound at the very least. Volts still ok so having a rethink.
My System SpecsSystem Spec
13 Jul 2014   #10
Zarathud

Windows 7 Professional 64-bit SP1
 
 

No sure what this means:

Quote   Quote: Originally Posted by ICit2lol View Post
That would have me changing the compound at the very least.
I booted after being off for awhile to check the temps (see attached) and then rebooted into Memtest for a check. CPUID attached and Memtest CPU temp was bouncing around, but started at 59 C and went up to around 68 C within a minute or two. Looks like the Memtest temp definitely reads higher.
My System SpecsSystem Spec
Reply

 BSOD 0x1000007e for ntoskrnl.exe after Sys Recovery Disks reinstall




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD SYSTEM_THREAD_EXCEPTION_NOT_HANDLED 0x1000007e ntoskrnl.exe
I get bsods 2 times when playing flash games watching youtube and all streaming and when playing pc games, and scanning virus
BSOD Help and Support
BSOD on restart - ntoskrnl.exe 0x1000007e
I went to restart my computer before starting an art stream about 10 hours ago and I got a BSOD message...first time I seen one in years. I had windows perform a reboot recovery (or..whatever that thing is called) a dozen times, but it was unable to fix any problems. Tried "Last known good...
BSOD Help and Support
BSOD 0x1000007e at power on my PC with ntoskrnl.exe driver volsnap.sys
Hi All, my name is Mariano, from Argentina (and sorry for my English :-D) I need your help on these BSODs I have BSOD 0x1000007e at power on my PC with ntoskrnl.exe and driver volsnap.sys at turn on my PC. Also, the PC automatically restart and I have a deformed screen of ASUS. I turn off...
BSOD Help and Support
BSOD , error 0x1000007e, caused by Wdf01000.sys, address ntoskrnl.exe
For the past 3 weeks, I have been receiving blue screens serval times. :sarc: Each time, the caused of the error reports has been "Wdf01000.sys" and address at ntoskrnl.exe+74a90. I've attached 3 dmp files to this post. Any help is appreciated! Thanks.
BSOD Help and Support
Frequent BSOD 0x0000003b, 0x1000007e, ntoskrnl.exe, info attached
Hi guys, I've lately been getting very frequent blue screens. They've been occurring for a while but until the last few days they've been rare. Now they are happening every few hours randomly and can be triggered 100% after I spend 10 minutes in Photoshop. Looking at the minidumps in...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:34.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App