Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD netio.sys

15 Jul 2014   #11
Fatherdeath

Windows 7 Home Premium 64 bit
 
 

Okay, I must have missed that! my bad :0
I'm now running with no startup programs or services (other than the microsoft services)
Will see if my PC BSOD now. Will let my pc idle for a while and see if anything happens


My System SpecsSystem Spec
.
16 Jul 2014   #12
Fatherdeath

Windows 7 Home Premium 64 bit
 
 

So after running for 6+ hours without a BSOD with nothing enabled. I enabled a couple of things and still have yet to crash. Will reinstall antivirus and see what happens.
My System SpecsSystem Spec
29 Jul 2014   #13
Fatherdeath

Windows 7 Home Premium 64 bit
 
 

Okay so rather than opening a new thread I thought I'd just repost in here.
The netio.sys problem stopped.
Today my I got BSOD for no reason, and I couldn't see any reason either on the actual error screen.
My System SpecsSystem Spec
.

29 Jul 2014   #14
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Run Disk Check on your Hard Drive for file system errors and bad sectors on it:Upload a screenshot of your hard disk using Crystal Disk Info:Make a hard drive test from the hard drive manufacturers website:Test your Hard Drive with SeaTools:Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Memtest should be done overnight.
My System SpecsSystem Spec
Reply

 BSOD netio.sys




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Bsod netio.sys
Hi - I recently updated a few drivers on my Toshiba Tecra R940. Since then I started to receive BSODs identifying NETIO.SYS. I rolled back the wi-fi network adapter driver, but still BSODs. I installed an earlier version of INTEL PROSet/Wireless WiFi utility, but still BSODs. Last night after the...
BSOD Help and Support
BSOD with netio.sys
HI, I am using windows 7 home premium edition, getting error "irql_not_less_or_equal" when I start utorrent. I am attaching BSOD zip generated by SF diagnostic tool. Please help me in fixing this issue. thanks, Gurucharan.
BSOD Help and Support
BSOD netio.sys
It happened after i updated my drivers..
BSOD Help and Support
[BSOD] NETIO.sys
i'm getting a BSOD just a little after firing up utorrent. got a windows 7 pro 32bit. updated all drivers: network, ATI catalyst... no firewall, using mcafee enterprise 8.8, updated. compatible with win7.
BSOD Help and Support
BSOD NETIO.sys
I fairly regularly get a BSOD when doing various tasks. Mainly I notice it when I have many active internet connections. My drivers are fully update for my network card and my card is a Atheros AR928X.
BSOD Help and Support
Netio.sys BSOD
Hi all. I keep getting Netio.sys blue screens. Was wondering if anyone can help me. Here are my minidump files. Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64 Copyright (c) Microsoft Corporation. All rights reserved.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:27.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App