Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Different msg BSOD every first Startup of each day


1 Week Ago   #1

Windows 7 home premium 64 bit
 
 
Different msg BSOD every first Startup of each day

Hi everybody, I have multiple BSODs showing up every first Startup of each day. It only happens the first time I turn on the computer each day and the BSOD messages vary.

Once the BSOD appears I just restart the PC and everything runs smoothly.

I have attached DM generated zip file. Please help



Attached Files
File Type: zip JACKYHTPC-Tue_07_15_2014_193139_78.zip (2.61 MB, 1 views)
My System SpecsSystem Spec
.

1 Week Ago   #2

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Welcome to the forum Greewn,

Allot of important info is missing from your zip, please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a new report here.

For starters, you could take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Memtest should be done overnight.
My System SpecsSystem Spec
1 Week Ago   #3

Windows 7 home premium 64 bit
 
 

Thank you koolkat, I have uploaded the correct file and left memtest running overnight with no errors reported this morning.

What's next?
My System SpecsSystem Spec
.


1 Week Ago   #4

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

How many passes did you take memtest for?

Please uninstall Daemon Tools. It uses a driver called sptd.sys which is known to cause BSODs in Windows 7.
Code:
Start Menu\Programs\DAEMON Tools Lite	Public:Start Menu\Programs\DAEMON Tools Lite	Public
Uninstall the software using Add/Remove Programs. Reboot the system. Once the program is uninstalled, run sptd.sys uninstaller to remove the driver from your system.

As an alternative, many people recommend the use of Total Mounter or Magic ISO
Perform a Clean boot:Reduce items at start-up. No software except anti-virus is required plus doing this improves the time for logging into windows:Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
  • Click on the
  • Type CMD on Search
  • Left click and Run as Administrator
  • Type SFC /scannow
Full tutorial here:Remove Avast! antivirus, use MSE instead.

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability
compared to other antivirus or internet security software. It is free and lightweight:-
warning   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

My System SpecsSystem Spec
4 Days Ago   #5

Windows 7 home premium 64 bit
 
 

ok koolkat i have tried every step with no success. i have uploaded a more recent dump collection. where do we go from here?


Attached Files
File Type: zip JACKYHTPC-Mon_07_21_2014_205933_14.zip (2.69 MB, 3 views)
My System SpecsSystem Spec
4 Days Ago   #6

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

What about the RAM.

How many passes of memtest did you take.
My System SpecsSystem Spec
4 Days Ago   #7

Windows 7 home premium 64 bit
 
 

8 passes overnight.

Is it helpful if I write down each BSOD that shows up everyday? (There are like 3 or 4 recurring ones) Or can you see that info in DUMP files?
My System SpecsSystem Spec
4 Days Ago   #8
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Hi.

The BSODs are highly indicating that something is going wrong with the hardware environment, and RAM is the primary suspect.
Code:
BugCheck 3B, {c0000096, fffff880018697ba, fffff880040a3a00, 0}

Probably caused by : memory_corruption
Code:
MODULE_NAME: memory_corruption

IMAGE_NAME:  memory_corruption

FOLLOWUP_NAME:  memory_corruption

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MEMORY_CORRUPTOR:  STRIDE

STACK_COMMAND:  .cxr 0xfffff880040a3a00 ; kb

FAILURE_BUCKET_ID:  X64_MEMORY_CORRUPTION_STRIDE

BUCKET_ID:  X64_MEMORY_CORRUPTION_STRIDE

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:x64_memory_corruption_stride

FAILURE_ID_HASH:  {54f6a81e-bd17-9afc-f167-0352818951c1}

Followup: memory_corruption
---------
Code:
BugCheck 50, {fffff50013803112, 0, fffff80003287eb8, 7}


Could not read faulting driver name
Probably caused by : hardware ( nt!KiCheckForKernelApcDelivery+14 )

Followup: MachineOwner
---------
Code:
BugCheck D1, {72, a, 1, fffff880010a1ea6}

Probably caused by : atapi.sys ( atapi!AtapiHandleAtaCommand+a )
Code:
BugCheck 50, {fffff87ff724f86d, 1, fffff8800124f7b6, 5}

*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys

Could not read faulting driver name
Probably caused by : memory_corruption

Followup: memory_corruption
---------
Code:
fffff880`0378e410 fffff880`010b381f ataport!IdeDispatchChannelRequest+0xef
fffff880`0378e440 fffff880`010b3684 ataport!IdeStartChannelRequest+0x113
fffff880`0378e4c0 fffff880`010b4a16 ataport!IdeStartDeviceRequest+0x2c4
fffff880`0378e580 fffff880`010b04ee ataport!IdePortPdoDispatch+0xb6
fffff880`0378e5b0 fffff880`00f1f7a7 ataport!IdePortDispatch+0x16
If memory is tested good, do two more things.

Scan the system for possible virus infection with the following programs.
And, there is one possible BIOS update to your motherboard. BIOS Update [JGIBX10J.86A]. Plan to apply it.

As hardware is reported as a probable cause, do some more hardware tests.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Test the HDD using Data Lifeguard Diagnostic for Windows. Take bot the short test and the extended test.

Let us know the results.
My System SpecsSystem Spec
3 Days Ago   #9

Windows 7 home premium 64 bit
 
 

Thank you arc for your input, I will look into it.
My System SpecsSystem Spec
Reply

 Different msg BSOD every first Startup of each day




Thread Tools



Similar help and support threads for2: Different msg BSOD every first Startup of each day
Thread Forum
Solved BSOD on startup, unknown error, startup repair running too long BSOD Help and Support
BSOD on Startup - Startup Reapir not working BSOD Help and Support
BSOD at startup, cant repair startup BSOD Help and Support
BSOD after playing games + Random BSOD on startup BSOD Help and Support
BSOD on startup , error 0x000000f4 . startup takes half an hour BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:36 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33