Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD.....

17 Jul 2014   #1
NecroticisM666

Windows 7 Ultimate Edition, 64 Bit Build 7600
 
 
Random BSOD.....

Good day guys!

There are times that a random BSOD happens to my laptop running Windows 7 x64bit and I don't know why. So I want to seek your help to diagnose and solve it. My laptop currently has a dual boot OS comprising of Windows Vista and Win7 so I wonder if that's where the problem is coming from..can you help me guys? Thanks in advance!

Here's the debug files:

Attachment 325918


My System SpecsSystem Spec
.
17 Jul 2014   #2
HarriePateman

Windows 7 Ultimate 64-bit
 
 

OKay so i have had a look at your DMP files and it is quite interesting:

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fc0001e158, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc0000185, error status (normally i/o status code)
Arg3: 0000000030ce1860, current process (virtual address for lock type 3, or PTE)
Arg4: fffff80003c2bc50, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------


ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error.

DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR:  0x7a_c0000185

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  CODE_CORRUPTION

PROCESS_NAME:  System

CURRENT_IRQL:  0

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) x86fre
Code:
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fc806170c0, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc0000185, error status (normally i/o status code)
Arg3: 000000001f9cb880, current process (virtual address for lock type 3, or PTE)
Arg4: fffff900c2e18ff8, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------


ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error.

DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR:  0x7a_c0000185

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

PROCESS_NAME:  dwm.exe

CURRENT_IRQL:  0

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) x86fre
As we can see both of the DMP Files are pointing toward some form of memory corruption.

STOP 0x0000007A: KERNEL_DATA_INPAGE_ERROR

Usual causes: Memory, Paging file corruption, File system, Hard drive, Cabling, Virus infection, Improperly seated cards, BIOS, Bad motherboard, Missing Service Pack.

Quote:
Open an elevated command prompt and enter: CHKDSK C: /F /R then press ENTER to repair corrupt sectors, if there are any.
NOTE!!: The root drive has to be C: and the command may schedule a task at the system startup, if it does, then press Y to schedule a task and restart the computer to perform chkdsk.
Once chkdsk completes, boot to the desktop. You can check the log of chkdsk by going to Event Viewer >> Windows Logs >> Application. Under the Source column locate Wininit entries.
Quote:
Run Memtest86+ overnight, after your computer has been off for about an hour . Let it run for at least 7 passes / 6-8 hours. If errors appear you can stop that particular test.
Note!! Any time Memtest86+ reports errors, it can be either bad RAM or a bad Mobo slot. Test RAM sticks individually. When you find a good one then test it in all slots. Post back with the results.
RAM - Test with Memtest86+
My System SpecsSystem Spec
17 Jul 2014   #3
NecroticisM666

Windows 7 Ultimate Edition, 64 Bit Build 7600
 
 

Thanks for the input HarriePateman, will do this tonight and post the results/outcome when it's finished. Thank you.
My System SpecsSystem Spec
.

18 Jul 2014   #4
HarriePateman

Windows 7 Ultimate 64-bit
 
 

No worries.
My System SpecsSystem Spec
Reply

 Random BSOD.....




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD after start and Random stuck on windows logo screen
Heyy.. So yesterday due to a sudden power outage (happens allot here), my windows started behaving erratically. First when the power came on my windows 7 ultimate 64 bit, was stuck on windows logo. i waited for about 20 mins and it was still stuck. The HDD read activity light on my casing was...
BSOD Help and Support
Random BSOD problems in the past 2 days. Random errors at random times
Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty...
BSOD Help and Support
BSOD at seemingly random times, memory dump blaming random drivers
I've been plagued by odd problems since making this custom build about a month ago, but the latest is the increasing frequency of BSODs. They never occur at load (gaming with high end specs), but often occur at shutdown (forcing a restart before I can then actually shut down). I normally boot into...
BSOD Help and Support
Random BSOD at random moments on Toshiba L500 laptop; graphics card?
My GF has had a Toshiba L500 laptop for 4 years now. It's a great model and it worked well...till now. It started about two weeks ago, with 1 blue screen every 1-2 days. I haven't reinstalled her windows for about a year, so i figured that was the problem. Four days ago it started blue...
BSOD Help and Support
Random BSOD with random error code at random moment
Hello Ok now i'm out of solution so i come here hoping that someone could help me I always had bsod hapening randomly but not like the this week I got 2 bsod/day when i'm playing, when i'm staring at my monitor or even when i'm sleeping with random error code like 0x1e, 0x24, 0x3b, 0x4a or 0xa...
BSOD Help and Support
BSOD doing random things (Google Chrome, minecraft, random times)
I have finally had it up to here with the BSODs, so I really need help. I ran a windows memtest and it detected no errors. I just finished updating to SP1 with pretty much most updates too. The BSODs I get the most are: Driver IRQL not less or Equal System Service Exception and these two I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App