Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD

21 Jul 2014   #1
Ascendents

Windows 7 Pro SP1 x64
 
 
Random BSOD

Had nothing open except a web page on youtube was not even watching a video and poof blue screen what gives?


My System SpecsSystem Spec
.
21 Jul 2014   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi Ascendents.

Uninstall your installed version of the display driver.
Then clean up any possible leftover.
Then install version 13.9 WHQL only.
When the drive is properly applied, Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Let us know the results.
________________________________________
Code:
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff8800f4dadbb, fffff880009d7228, fffff880009d6a80}

Probably caused by : atikmdag.sys ( atikmdag+c7dbb )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8800f4dadbb, The address that the exception occurred at
Arg3: fffff880009d7228, Exception Record Address
Arg4: fffff880009d6a80, Context Record Address

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP: 
atikmdag+c7dbb
fffff880`0f4dadbb 488b83a8060000  mov     rax,qword ptr [rbx+6A8h]

EXCEPTION_RECORD:  fffff880009d7228 -- (.exr 0xfffff880009d7228)
ExceptionAddress: fffff8800f4dadbb (atikmdag+0x00000000000c7dbb)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: 00000000000006a8
Attempt to read from address 00000000000006a8

CONTEXT:  fffff880009d6a80 -- (.cxr 0xfffff880009d6a80;r)
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000870000 rdi=0000000000000002
rip=fffff8800f4dadbb rsp=fffff880009d7460 rbp=fffffa800faa2960
 r8=0000000000000002  r9=000000f41cae8000 r10=0000000000000000
r11=fffff880009d7690 r12=fffffa80108d3f40 r13=fffffa800f754c00
r14=fffffa800d659740 r15=fffff8800f413000
iopl=0         nv up ei pl zr na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010246
atikmdag+0xc7dbb:
fffff880`0f4dadbb 488b83a8060000  mov     rax,qword ptr [rbx+6A8h] ds:002b:00000000`000006a8=????????????????
Last set context:
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000870000 rdi=0000000000000002
rip=fffff8800f4dadbb rsp=fffff880009d7460 rbp=fffffa800faa2960
 r8=0000000000000002  r9=000000f41cae8000 r10=0000000000000000
r11=fffff880009d7690 r12=fffffa80108d3f40 r13=fffffa800f754c00
r14=fffffa800d659740 r15=fffff8800f413000
iopl=0         nv up ei pl zr na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010246
atikmdag+0xc7dbb:
fffff880`0f4dadbb 488b83a8060000  mov     rax,qword ptr [rbx+6A8h] ds:002b:00000000`000006a8=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  00000000000006a8

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800038c7100
GetUlongFromAddress: unable to read from fffff800038c71c0
 00000000000006a8 Nonpaged pool

FOLLOWUP_IP: 
atikmdag+c7dbb
fffff880`0f4dadbb 488b83a8060000  mov     rax,qword ptr [rbx+6A8h]

BUGCHECK_STR:  0x7E

ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre

LAST_CONTROL_TRANSFER:  from 00000000040b0000 to fffff8800f4dadbb

STACK_TEXT:  
fffff880`009d7460 00000000`040b0000 : 00000000`040cdfff fffffa80`108d3f40 00000000`00000003 fffffa80`0d659740 : atikmdag+0xc7dbb
fffff880`009d7468 00000000`040cdfff : fffffa80`108d3f40 00000000`00000003 fffffa80`0d659740 fffff880`0f53bf6f : 0x40b0000
fffff880`009d7470 fffffa80`108d3f40 : 00000000`00000003 fffffa80`0d659740 fffff880`0f53bf6f 00000000`00000100 : 0x40cdfff
fffff880`009d7478 00000000`00000003 : fffffa80`0d659740 fffff880`0f53bf6f 00000000`00000100 fffffa80`0faa1820 : 0xfffffa80`108d3f40
fffff880`009d7480 fffffa80`0d659740 : fffff880`0f53bf6f 00000000`00000100 fffffa80`0faa1820 00000000`00000098 : 0x3
fffff880`009d7488 fffff880`0f53bf6f : 00000000`00000100 fffffa80`0faa1820 00000000`00000098 000ddf83`00000098 : 0xfffffa80`0d659740
fffff880`009d7490 00000000`00000100 : fffffa80`0faa1820 00000000`00000098 000ddf83`00000098 00000000`00000000 : atikmdag+0x128f6f
fffff880`009d7498 fffffa80`0faa1820 : 00000000`00000098 000ddf83`00000098 00000000`00000000 00000000`00000001 : 0x100
fffff880`009d74a0 00000000`00000098 : 000ddf83`00000098 00000000`00000000 00000000`00000001 00000000`ffffffff : 0xfffffa80`0faa1820
fffff880`009d74a8 000ddf83`00000098 : 00000000`00000000 00000000`00000001 00000000`ffffffff fffff880`009d7730 : 0x98
fffff880`009d74b0 00000000`00000000 : 00000000`00000001 00000000`ffffffff fffff880`009d7730 fffff880`009d75e0 : 0x000ddf83`00000098


SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  atikmdag+c7dbb

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: atikmdag

IMAGE_NAME:  atikmdag.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  53508a3c

STACK_COMMAND:  .cxr 0xfffff880009d6a80 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_atikmdag+c7dbb

BUCKET_ID:  X64_0x7E_atikmdag+c7dbb

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:x64_0x7e_atikmdag+c7dbb

FAILURE_ID_HASH:  {1bce3716-c561-7934-01c3-535369bb657c}

Followup: MachineOwner
---------

1: kd> lmvm atikmdag
start             end                 module name
fffff880`0f413000 fffff880`10323000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Fri Apr 18 07:43:16 2014 (53508A3C)
    CheckSum:         00EAEEE6
    ImageSize:        00F10000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
21 Jul 2014   #3
Ascendents

Windows 7 Pro SP1 x64
 
 

Uninstalled the driver installed the 13.9 Driver did the driver sweep and ran the furmark for 10 minutes maxed out temp of 70c everything looks good so far.
My System SpecsSystem Spec
.

22 Jul 2014   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

OK, let us know for any further issue.
My System SpecsSystem Spec
Reply

 Random BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD after start and Random stuck on windows logo screen
Heyy.. So yesterday due to a sudden power outage (happens allot here), my windows started behaving erratically. First when the power came on my windows 7 ultimate 64 bit, was stuck on windows logo. i waited for about 20 mins and it was still stuck. The HDD read activity light on my casing was...
BSOD Help and Support
Random BSOD problems in the past 2 days. Random errors at random times
Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty...
BSOD Help and Support
BSOD at seemingly random times, memory dump blaming random drivers
I've been plagued by odd problems since making this custom build about a month ago, but the latest is the increasing frequency of BSODs. They never occur at load (gaming with high end specs), but often occur at shutdown (forcing a restart before I can then actually shut down). I normally boot into...
BSOD Help and Support
Random BSOD at random moments on Toshiba L500 laptop; graphics card?
My GF has had a Toshiba L500 laptop for 4 years now. It's a great model and it worked well...till now. It started about two weeks ago, with 1 blue screen every 1-2 days. I haven't reinstalled her windows for about a year, so i figured that was the problem. Four days ago it started blue...
BSOD Help and Support
Random BSOD with random error code at random moment
Hello Ok now i'm out of solution so i come here hoping that someone could help me I always had bsod hapening randomly but not like the this week I got 2 bsod/day when i'm playing, when i'm staring at my monitor or even when i'm sleeping with random error code like 0x1e, 0x24, 0x3b, 0x4a or 0xa...
BSOD Help and Support
BSOD doing random things (Google Chrome, minecraft, random times)
I have finally had it up to here with the BSODs, so I really need help. I ran a windows memtest and it detected no errors. I just finished updating to SP1 with pretty much most updates too. The BSODs I get the most are: Driver IRQL not less or Equal System Service Exception and these two I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:28.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App