Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: bluescreen error at every start of windows

20 Aug 2014   #11
krunal

Windows 7 home basic x64
 
 

Hi arc,

My laptop works fine till yesterday. suddenly once again blue screen error comes. It was the same error code i.e 0x0116... but luckily it runs well after rebooting. but today evening when i play video from YouTube the screen hangs several times and after some time pop up shows that "Display driver stopped responding and has recovered". so i uninstalled display driver which is ATI mobility readon 5470 HD. after sometimes when laptop is not in use it gets in sleep mode and when i had tried to wake it up the display goes off as earlier. after several times of starting i had notices that display doesn't respond but the other process running well. Now i am very disappointed by this because no any service person here can successfully rectify the actual problem. I need your immediate help.

The debug file is attached herewith. Also note that this time i am using Windows 7 home premium 32 bit sp1.


My System SpecsSystem Spec
.
20 Aug 2014   #12
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

AMD display is failing.
Quote:
BugCheck 116, {86116510, 916320a6, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+100a6 )

Followup: MachineOwner
---------
Stasndard VGA is failing, too.
Code:
BugCheck 100000EA, {86a0c728, 869f9728, 87312418, 1}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
*** WARNING: Unable to verify timestamp for framebuf.dll
*** ERROR: Module load completed but symbols could not be loaded for framebuf.dll
Probably caused by : vgapnp.sys ( vgapnp!VgaSetMode+9a )

Followup: MachineOwner
---------
Either it is too hot and dusty to work display properly or it is not getting enough power from the PSU or the motherboard is badly failing.
My System SpecsSystem Spec
Reply

 bluescreen error at every start of windows




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 BlueSCreen Error BAD_POOL_HEADER BCCode: 19
Hello All, Need urgent help. My windows 7 laptop has been giving BlueSCreen Error with below message. I am uploading the ZIP file which has all the files gathered by dm log collector. Please help. Thanks in advance. BAD_POOL_HEADER Problem signature: Problem Event Name: BlueScreen ...
BSOD Help and Support
Windows 7 showing bluescreen error
Hi, I am running a windows 7 professional 32 bit on an industrial PC, the spec is: Intel N270 Processor. 2GB RAM. The same HW runs very well with windows XP, but as soon as I changed to Win7 the problem occurs. Can anyone check attached minidump file and tell me where is the problem? Thanks
BSOD Help and Support
BlueScreen Error BCCode 4e, happened on new installed Windows
Hi! I have a quite a big problem. I recently reinstalled windows on my PC. 2 days after that got BlueScreen and Windows doesn't boot anymore. Thank goodness I was able to start computer in Safe Mode but I got BlueScreen once again in a few minutes. So while I was in Safe Mode I got some...
BSOD Help and Support
Windows 7 start up error 0x00000e9 I/O error
For the past 1 month, whenever i used to turn on my laptop, at start up, it gave me that there is an error 0x00000e9 Description : Unknown I/O error from the driver or unknown thing. I want to restore my laptop because it has corrupted files. But whenever i want to restore i click F10 at...
Hardware & Devices
Bluescreen of death before Windows can even start-up
This is an Acer laptop. With an Intel (R) Celeron (R) CPU. The VGA BIOS Version: Intel V1518. Product name: Aspirte 5315. I've tried safe-mode, debugging mode, everything. It says UNMOUNTABLE_BOOT_VOLUME Technical Information: *** STOP: 0X000000ED (0x8615C00000185,0x00000000,0x00000000)...
BSOD Help and Support
Please help! Receiving Windows 7 BlueScreen error
I was wondering if anyone could help me out with a problem I'm having with my Gateway SX2802 system that I just recently purchased. Ever since I hooked my system up I've been getting BlueScreen errors and the Gateway technical support are of no help. After an extended period of use, movements...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App