Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Blue Screen BCCode 124

30 Jul 2014   #11
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Quote   Quote: Originally Posted by fireberd View Post
I looked at the BIOS.

With XMP Disabled, the "System Memory Multiplier" is 16.00, with XMP Profile 1 (or 2) the Multiplier is 18.67. In all cases it shows memory frequency as 1600Mhz.

Here is the CPU Z Memory section with Profile 1
Can you post a screenshot of the SPD tab?


My System SpecsSystem Spec
.
30 Jul 2014   #12
fireberd

Windows 10 64 bit
 
 

I'll give it a day or two and see what happens. If there are no more halts I'll assume it was the memory configuration.

Here is the SPD panel
My System SpecsSystem Spec
30 Jul 2014   #13
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

It looks fine to me. The ram is running at specs for 1600, so maybe that will help.
My System SpecsSystem Spec
.

30 Jul 2014   #14
carwiz

Windows 7 Pro-x64
 
 

Is there any writing to that USB key? How old is it? You might look into what it takes to get a replacement just in case

The image above is Slot#1. Do the others match? Data gets spread over all modules available. That's how dual/quad channel memory works. It never gets used end-to-end.

I'll stay subscribed and tag along. 0x124 hardware errors are always hard to pin down. I'm surprised memtest didn't say anything. The recovered cache errors have me on edge. Even though you don't get a dump, a fresh run of the utility and/or a look at the syslog might confirm you're not getting continued cache errors. Give it day or so and re-run the utility.
My System SpecsSystem Spec
30 Jul 2014   #15
fireberd

Windows 10 64 bit
 
 

All 4 memory slots show the same in CPU-Z.

The USB "dongle" key for iLok is a proprietary and its a $49 charge for a new one plus a charge by Pace to move it to a new key. On recording forums, there is very little failure of the keys. There have been some that had problems with the Pace software, but I haven't had any issues (over the past 5 years that I've been using it).

Although I have a SSD and fast boot up times, it seems to be visibly faster since I changed the memory to XMP. I have some Corsair that I can try if needed (if I get another blue screen).
My System SpecsSystem Spec
30 Jul 2014   #16
fireberd

Windows 10 64 bit
 
 

Update, I'm posting this from my dual boot Win 8.1.1 installation. Win 8 metro apps are zinging by much faster since I changed memory to XMP. Maybe that change was the answer? Again, I'll wait a couple of days to see if its settled down.

Thanks/Jack
My System SpecsSystem Spec
30 Jul 2014   #17
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I thought that is the way you had it before. But, It's good that it's running good, no matter how it was. Good, job.
My System SpecsSystem Spec
31 Jul 2014   #18
fireberd

Windows 10 64 bit
 
 

I was still getting an occasional WHEA error (not many but I did get two) showing up in the Windows system event logs.

I swapped the GSkill memory with Corsair Vengeance 1866Mhz memory CMY16GX3M2A1866C9R.

I haven't got a WHEA error since. However, I can't get my Gigabyte GAZ77X UD5H motherboard (with an i7 3770) memory speed up to the 1866.

In the BIOS I have
XMP Profile 1
System Memory Multiplier 18.67
Memory Frequency 1333 Mhz. The option for this parameter is grayed out (not accessable) but shows 1867Mhz

Here are the CPU-Z panels
My System SpecsSystem Spec
31 Jul 2014   #19
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

You could try, if your board allows it, to set it manually, with the frequency at 1866, timings of 9-10-9-27-2T and the voltage at 1.5V. But I'm not sure why the XMP would be greyed out. You ram clearly has an XMP profile.
My System SpecsSystem Spec
31 Jul 2014   #20
carwiz

Windows 7 Pro-x64
 
 

The specs on that board would indicate 1866 is not an option. It jumps from 1600 in native mode to 2400 2800 if overclocked. Steve is the over clocker so I'll stand by. The Gigabyte specs include a number of steps in their memory compatibility chart so does this mean you have to turn off XMP and overclock the memory to get those steps?

Memory Standard DDR3 2400(OC)/1600/1333/1066
My System SpecsSystem Spec
Reply

 Blue Screen BCCode 124




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BCCode:1e Blue Screen after every startup
I have a laptop Asus with i5 core win7 premium 64 bit...I get blue screens every time it starts up...i get the following.. BCCode: 1e BCP1: FFFFFFFFC0000005 BCP2: FFFFF80003058677 BCP3: 0000000000000000 BCP4: 000000007EFA0000 OS Version: 6_1_7600 Service Pack: 0_0 Product: 768_1
BSOD Help and Support
Blue Screen error, BCCODE : d1
Hi, recently, I've encountered blue screen error BCCode : d1. I know it has something to do with driver but I have no idea which driver has problem. Thanks in advance for your help Here is some information regarding this error: BCCode: d1 BCP1: 0000000000000028 ...
BSOD Help and Support
Blue Screen with BCCode:116
Hey, everyone: When I use my computer, i got blue screen. the code is: Problem signature: Problem Event Name: BlueScreen OS Version: 6.0.6002.2.2.0.768.2 Locale ID: 1033 Additional information about the problem: BCCode: 116
BSOD Help and Support
Blue Screen crash -- bccode:a
Basic information: Windows 7 x64 original installed OS on the system full retail version I bought the hardware in 2009. and had my win7 installed about the same time. My problem:
BSOD Help and Support
Blue Screen on Win7 [BCCode:117]
Hi I am using Windows 7 64-bit since six months without any problem , just since abouttwo weeks the computer suddenly restart and the Blue Screen appear and after windows is rebooted there is an error message IT is windows seven professional x64bits I bought every piece of my computer...
BSOD Help and Support
Blue screen BCCode: a
Hi Guys My new PC always resets itself.... I have read some users have similar problem but they have different BCCode... PS: some times the BCCode is different... PLS help me !
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:44.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App