Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Freshly installed PC BSOD Win7 pro 64bit

08 Aug 2014   #11
tmtz

Win 7 pro 64bit
 
 

I forgot to mention that I did secure it back and applied new thermal paste


My System SpecsSystem Spec
.
08 Aug 2014   #12
centaur78

Windows 7 ultimate x64
 
 

ok alright

Then use Speedfan or CoreTemp or HwMonitor to post a snapshot of the temps currently on the system
My System SpecsSystem Spec
08 Aug 2014   #13
tmtz

Win 7 pro 64bit
 
 

i ran all 3
My System SpecsSystem Spec
.

08 Aug 2014   #14
carwiz

Windows 7 Pro-x64
 
 

Sorry about getting back so tardy. Had to make a quick trip out of town and got too late and lazy to drive back last night. I tried to get on last night with a friend's note pad but it didn't seem to stay connected.

Those temps aren't bad and there was no throttling in the log. The log entry is not an indication of overheating. It's an after-the-fact entry after a power fault.

Quote:
Something else that happened when I was done with the memtest the pc was not responding had to turn off by holding down the button then would not come back on until I unplugged it for a bit and replugged
TMTZ - This sounds an awful lot like a power problem. You mentioned the PS was replaced but can you give some details of the machine. Perhaps it's under powered. (Model numbers would help.)

Also, do you still get the BSOD in Safe Mode? (Sill running the Clean Startup, I hope.)

Upload a fresh zip of the dumps and DM files after getting the next dump.
My System SpecsSystem Spec
08 Aug 2014   #15
tmtz

Win 7 pro 64bit
 
 

No worries, I haven't changed the PSU because it passed the paper clip test but that was probably a month ago. Iam currently running on clean start up and have not bsod, before I ran in clean start up. I started the pc on safe mode and it would bsod but it has not since i made the changes. The pc is a build, i have the model # on my first post here's the power

psu:ultra ls 600w
My System SpecsSystem Spec
08 Aug 2014   #16
carwiz

Windows 7 Pro-x64
 
 

Is that the PSU model number? 600W would seem to be enough.

Update the BIOS. You are many versions behind. I found the image below checking the MB specs.
My System SpecsSystem Spec
08 Aug 2014   #17
tmtz

Win 7 pro 64bit
 
 

sorry model # ULT-LS600p
My System SpecsSystem Spec
08 Aug 2014   #18
tmtz

Win 7 pro 64bit
 
 

Ok I went to the Asus website to download the latest BIOS for the mb that fits the cpu and two things 1. my Bios v0703 so I do not have to flash the bios 2 when i downloaded it its a bin file idk how to open or use it

heres the website
ASUSTeK Computer Inc. -Support- CPU Support P5N-E SLI Core 2 Duo E6850 (3.00GHz,1333FSB,L2:4MB,rev.G0)
My System SpecsSystem Spec
08 Aug 2014   #19
carwiz

Windows 7 Pro-x64
 
 

You need to check the manual for your motherboard. They're all different. I suspect you will need the BIOS Utility.

ASUSTeK Computer Inc. -Support- Drivers and Download P5N-E SLI
My System SpecsSystem Spec
12 Aug 2014   #20
tmtz

Win 7 pro 64bit
 
 

Finally after some heavy searching and reading I was finally able to update the BIOS. The only way I was able to do it is by using a USB that was less than 1 gig big so the Asus EZ flash 2 could see it. I will monitor to see if it made a difference.
My System SpecsSystem Spec
Reply

 Freshly installed PC BSOD Win7 pro 64bit




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Freshly installed OS win7 64bit taking 30 seconds at Welcome screen
I just installed windows last night without any software on it but all the drives it takes about 30 seconds from putting in my password. I have nothing what so ever running in startup so I'm a bit confused. I'm using Crucial brand new SSD and 16gigs of G.Skill ram and both are working fine. Any...
General Discussion
BSOD on freshly installed Windows 7
Hello guys, I Installed Windows 7 Ultimate and I got a lot of BSODs so I decided to format and do a fresh install of Windows 7, this time enterprise but the BSODs continue System specs: Windows 7 Enterprise x64 Full Retail The hardware has 3 days. Windows was installed yesterday ...
BSOD Help and Support
BSOD tcip.sys , 0x0000000D1 Freshly installed win7 x64
Hello, i'm having 10 min intervall BDOS's after reinstalling my Windows 7 Ultimate, retailer bought My hardware is about a year old, the OS installation just under 1-2 hours old. Hopefully someone will have the time knowledge required to help me sort this out, meanwhile i'll try windows...
BSOD Help and Support
frequent bsod crushes on freshly installed PC
Hi, i'm having a lot of BSOD crushes on industrial PC that runs on Windows 7 32 bit professional edition.Sometimes it happens right on start up, sometimes after 15 minutes of work, sometimes after few hours . sometimes it appears when i open IE window, sometimes when i run DVR web based client. I...
BSOD Help and Support
BSOD freshly installed system
Hi guys, I?m desperate. I reinstalled windows 3 times because I couldn't figure out what is causing bsod...Here are the miunidumps...I don't know how to read them, Thank you so much
BSOD Help and Support
Freshly Build Win7 -64bit Computer Blue Screens or freezes randomly.
I recently build my first computer, using these parts (not sure what you need to know). Memory -*G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBRL CPU - Phenom II X6 1090t black edition Thuban 3.2GHz* PSU - Corsair CMPSU-850TX...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:46.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App