Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Frequent and multiple different BSOD Errors with no clear pattern

22 Aug 2014   #41
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Run Video Card - Stress Test with Furmark

Watch your video card temps. They will rise very high very quick. If they get too high, stop the test.


My System SpecsSystem Spec
.
22 Aug 2014   #42
Caridor

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I ran the test, my first GPU didn't seem to rise at all for most of the test, starting at 29, ending at 30C.
The second GPU rose up to 80C and then leveled out.
I didn't notice any artifacting.
My System SpecsSystem Spec
22 Aug 2014   #43
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If that's true, something is wrong. The top GPU is usually the hottest as it gets less airflow and it can't run Furmark and not get very hot. Remove your Cards and run 1 at a time in both slots. If you are running SLI, there is a problem.
My System SpecsSystem Spec
.

22 Aug 2014   #44
Caridor

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Hang on, I think i made a mistake.
GPU1 was on the bottom, and GPU2 was on the top.
Here's a screen shot.
My System SpecsSystem Spec
22 Aug 2014   #45
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

It's only using 1 GPU. Give this a try http://www.geeks3d.com/20101209/tips...-applications/
My System SpecsSystem Spec
22 Aug 2014   #46
Caridor

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Ok, so I enabled SLI and furmark says that both GPU's are levelling out at about 80C.
But it hasn't solved the BSOD.
I've had 2 since doing it, one was the same IRQL and the other said "Memory Management"

I did another one of those scans to generate the DXdiag, in case it will help.
My System SpecsSystem Spec
22 Aug 2014   #47
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Did it BSOD during the test? It wasn't to fix the problem, it was to see if your Graphics cards can withstand the test. There still are no dump files. Everything is exactly the same. Check this and make sure you are configured for Small Memory dumps and make sure you have a folder named Minidump in C:/Windows. Dump Files - Configure Windows to Create on BSOD
My System SpecsSystem Spec
22 Aug 2014   #48
Caridor

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Oh it's not created automatically?
Well, that's why I'm not getting dumps then.

And nope, no crashes during the test.
My System SpecsSystem Spec
22 Aug 2014   #49
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

BTW, you may want to set everything back to the way it was before you changed it to force Furmark to use both cards. Also, due to the memory management, run this test.
Please Run Memtest86+

information   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask
My System SpecsSystem Spec
22 Aug 2014   #50
Caridor

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Ok, I've done all 3 methods in that link about crash dumps and still no joy.
I'll run the memtest when I go to bed.
My System SpecsSystem Spec
Reply

 Frequent and multiple different BSOD Errors with no clear pattern




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD getting more frequent... no apparent pattern to when it happens.
Hi all, I've been getting a BSOD about once every week or so, but the last couple of days it has gotten to be more frequent, happening a couple of times yesterday and again today. I did use windbg to look at my dumpfiles, and it appears to be the same cause each time... I will let you...
BSOD Help and Support
Frequent BSOD on fresh install multiple errors
This could be a separate issue altogether but I have been unable to install the majority of windows updates (120 updates mainly consisting of windows 7 updates, security updates and .net framework updates.) This build ran brilliant to start, until about 6 months ago I began getting frequent...
BSOD Help and Support
BSOD in LoL, now very frequent. Multiple errors.
Hello! I've run into quite a jam here. I got a blue screen error a couple days ago while playing League of Legends that I believe was titled IRQL_NOT_LESS_THAN_OR_EQUAL, though it could have been something else. Anyway, I rebooted, ran a full system scan using Avast! antivirus (with nothing...
BSOD Help and Support
System Crashes and occasional BSOD with no clear pattern
About two months ago my system started giving me problems, first time in the 4 years since I built it. At first it was just an occasional freeze then a random reset. It then progressed to a BSOD that mostly disappeared before I could read. "IRQL not less then or equal" appeared a couple of times...
BSOD Help and Support
BSOD at random times. No clear pattern.
I have a problem w/ my Win7 Prof x32. At radom moments i get the bluescreen. I attached a zip file as explained. Can anyone help? Thanky in advance. System: Fuijitsu Siemens Si 3655
BSOD Help and Support
Frequent BSOD's, can't find a clear pattern. dump attached
Hi there crash experts. Have been encountering pretty random BSOD's on a family PC. Can't find a clear pattern in behavior which would lead to this happening. Would you mind taking a look? I'm out of ideas and analyzing BSOD's is definitely not one of my greatests strenghts...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App