Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after clean install, 0x50.

11 Aug 2014   #1
Hexagon12

Windows 10 Pro 64-bit/Windows 7 Ultimate 64-bit
 
 
BSOD after clean install, 0x50.

Well, this is bad.

Yesterday I installed Windows 7 Ultimate 32-bit on my HP Compaq D330 uT.

When it finished installing, I've left my computer for 2-3 minutes, and when I turned my screen on,
i saw a BSOD.

PAGE_FAULT_IN_NONPAGED_AREA
and in the bottom: win32k.sys

My computer is clean installed, no programs or drivers installed.

Here's the zip file with minidump. I can't run SF diagnostics, because i am in Hirens BootCD 13.0 with Mini Windows XP.


My System SpecsSystem Spec
.
11 Aug 2014   #2
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Run a memory test. For example memtest86
My System SpecsSystem Spec
11 Aug 2014   #3
Hexagon12

Windows 10 Pro 64-bit/Windows 7 Ultimate 64-bit
 
 

I ran MemTest86+ overnight, 8 passes with no errors.

Any more suggestions?
My System SpecsSystem Spec
.

11 Aug 2014   #4
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Bug check 0x50 usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, be it main memory, L2 RAM cache, or video RAM).
Another common cause is the installation of a faulty system service.
Antivirus software can also trigger this error=>no anti4us yet I assume (?)
It can be a corrupted NTFS volume. =>sure disk drive is okay? Test with manufacturer tools like seatools or data lifeguard diagnostics.

http://msdn.microsoft.com/en-us/libr...(v=vs.85).aspx
My System SpecsSystem Spec
11 Aug 2014   #5
Hexagon12

Windows 10 Pro 64-bit/Windows 7 Ultimate 64-bit
 
 

My hard disk is Maxtor 300 GB HDD.
Video card is Nvidia GeForce FX 5500 256MB (psst... It runs Aero very fine.)
My System SpecsSystem Spec
11 Aug 2014   #6
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Hexagon12 View Post
My hard disk is Maxtor 300 GB HDD.
Video card is Nvidia GeForce FX 5500 256MB (psst... It runs Aero very fine.)
0x50 bsod's are very difficult to troubleshoot. Do you have a spare videocard and use that temporary as a test? You have another disk drive to test?
My System SpecsSystem Spec
11 Aug 2014   #7
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Hexagon12 View Post
My hard disk is Maxtor 300 GB HDD.
Video card is Nvidia GeForce FX 5500 256MB (psst... It runs Aero very fine.)
You can't boot succefully anymore... correct?
If so... how do you know aero runs fine?
My System SpecsSystem Spec
11 Aug 2014   #8
Hexagon12

Windows 10 Pro 64-bit/Windows 7 Ultimate 64-bit
 
 

First post: I can remove the video card and go with Intel 82865G graphics controller. I don't have any spare HD's.

Second post: I know, because originally that video card came out of Intel D865GBF motherboard. It had Windows 7 on it. There was Aero. It used the Windows Vista drivers. My computer can't boot into normal mode. I didn't tried the Safe Mode.
Should I try it?
My System SpecsSystem Spec
11 Aug 2014   #9
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Hexagon12 View Post
First post: I can remove the video card and go with Intel 82865G graphics controller. I don't have any spare HD's.

Second post: I know, because originally that video card came out of Intel D865GBF motherboard. It had Windows 7 on it. There was Aero. It used the Windows Vista drivers. My computer can't boot into normal mode. I didn't tried the Safe Mode.
Should I try it?
The more info the better. So try safe mode.... works?

You have an on board graphics controller? Use that and temporary detach the nvidia card.

Post results
My System SpecsSystem Spec
11 Aug 2014   #10
Hexagon12

Windows 10 Pro 64-bit/Windows 7 Ultimate 64-bit
 
 

My HP Compaq D330 uT Specs:
Hewlett-Packard 085Ch motherboard
Intel Pentium 4 HT 2.8 GHz processor
Nvidia GeForce FX 5500 AGP8X 256 MB video card
Broadcom NetXtreme network adapter
SoundMAX Integrated Digital Audio
My System SpecsSystem Spec
Reply

 BSOD after clean install, 0x50.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD After Clean Install, 0x50, 0x0A,0x0D,0x101
hello people, first time on this forum so please be patient, ok basically about 3months ago my PC was working perfectly for months and months, and it started to slow a bit so i decided to reinstall windows 7 professional 64bit. the install completed successfully from a usb stick, and windows...
BSOD Help and Support
Persistent 0x50 BSOD upon restart, fresh install.
Hello guys, I've got an annoying BSOD on a nearly new computer, and I've tried to exhaust possibilities but can't seem to nail it down. Windows 7 x64 OS AMD Athlon ii x2 250 Processor @3 ghz Gigabyte GA-M68MT-SP2 F1 (w/ onboard Nvidia GeForce 7025/630a Graphics) ATI Radeon HD 5400 1 GB...
BSOD Help and Support
BSOD - After clean install
My computer is about 8 months old. I've been having troubles with it for a while. I just recently wiped the harddrive with a clean install due to my previous BSOD problem. I figured out the route cause of my previous BSOD's (AVG conflicting with ATI's drivers) and solved that problem. I...
BSOD Help and Support
Please Help Clean Install BSOD's
Hi, I have been having problems with this home built for a while tons of BSOD's and such. I did a complete clear of my HD and installed Windows 7 64 bit again yet still having issues I really need help. I have run Tests on my HD, RAM, and Video card not a problem that they have found. I dont know...
BSOD Help and Support
BSOD even after clean install
Sorry if this has been posted before but I get the BSOD randomly I've attached the minidump file If someone can help I truly would appreciate it I've tried uploading the zip file don't know why it isn't here? thank you!
BSOD Help and Support
BSOD's during clean W7 install
Hello folks, I'm having a heck of a time getting Windows 7 to do a clean install and any advice would be much appreciated. I recently purchased some older gen parts and threw together a gaming pc with them, later finding out that nvidia and microsoft don't get along these days... I'm trying...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:37.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App