Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Error 0x50 After New Windows Update

14 Aug 2014   #11
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

It can be anything. Good luck testing


My System SpecsSystem Spec
.
14 Aug 2014   #12
carversmith

Windows 7 PRO 64 bit
 
 
BSOD 0050 after Aug. 12 updates

There were 12 updates, applied all on Aug. 13, computer restarted and ran all day Aug 13.
Aug 14, BSOD and in SAFE MODE. Ran windows 7 recovery DVD to repair non starting system, did not work.
Did a system restore ro the "Critical Update" restore point and computer came up.

Will look at applying in batches of updates.
Computer is in my profile, but, Lenovo I7-3770, 32 GB Memory, Windows 7 PRO, AMD radeon HD 7450 graphics. Disks 1TB primary boot, 512MB secondary.
My System SpecsSystem Spec
14 Aug 2014   #13
jacklmx

Windows 7 Home Premium 64-bit SP1
 
 

Hi,

I've the same problem, it's the 12 updates for 12 Aug. I've tried three times, each time I get BSOD when starting up the computer, even starting in safe mood lead to BSOD. Only when I do system restore to before the update then I can start the system normally. I did not install any new software besides the windows updates.
My System SpecsSystem Spec
.

14 Aug 2014   #14
borabora

Windows7 Professional
 
 

Hi, sadly I can report that i have the same problem, including Blue Screens with 0x50.
A strange thing that is happening after doing a lot of trial and error with different components attached and unattached:

Everything is working okay when my 2nd Harddisk is unattached: this is the harddisk that i mostly use for cache to help my My Main-System SSD
My System SpecsSystem Spec
14 Aug 2014   #15
phainopepla

Windows 7 Ultimate x64
 
 

I, too, have this same problem. In my case, I have narrowed it down to two or more of the 9 "Security Updates for Windows 7 for x64" and "Updates for Windows 7 for x64".

Before testing with installing these 9 updates, I restarted my machine several times to ensure I had a good baseline with no BSOD. Now, if I try to install just the 5 Security Updates *or* just the 4 regular Updates, I see the problem. In both cases, however, I only get the Blue Screen x050 stop issue on the 2nd restart. On the first restart, Windows does some "configuring" and it comes up just fine. But if you then restart Windows a second time, it blue screens.

I'm at a loss as to what to try next.
My System SpecsSystem Spec
14 Aug 2014   #16
carversmith

Windows 7 PRO 64 bit
 
 
Second boot after update.

I think you might be right about the SECOND boot.
I think I did the update on Tuesday, ran all day, booted on Wed. and it was good
but blew up Thursday.
My System SpecsSystem Spec
14 Aug 2014   #17
phainopepla

Windows 7 Ultimate x64
 
 

Within the batch of 4 updates, I have narrowed the problem to KB 2970228. This update results in the this blue screen issue every time on my machine after the 2nd restart. It is a kernel type update.

And we are not alone:

Blue Screen Stop 0x050 error reported for systems installing KB2976897, KB2982791, and KB2970228 | Microsoft windows - InfoWorld

I am going to follow the article's suggestion and raise this with Microsoft.
My System SpecsSystem Spec
14 Aug 2014   #18
lvt08

Windows 7 Home Premium 64bit
 
 

Wow. It's good to know that I'm not alone in this. So far everything has been running smoothly. I haven't had the BSOD Error 0x50. I think the cause of the problem might have been when I updated all 12 Windows Update at the same time. So like Kaktussoft said, I only updated in batches of three. I also made restore points after every update just to be safe. I've rebooted everytime for every update and it's been running fine for me.
My System SpecsSystem Spec
14 Aug 2014   #19
jacklmx

Windows 7 Home Premium 64-bit SP1
 
 

Yup, for now, I can pretty confirm it is the kernel updates from Microsoft causing the BSOD. Same syndrome, 2nd restart after update gives BSOD everytime. Without updating, starts fine without any problem.

Saw some posts saying about deleting certain files as a workaround, but I would rather wait for an official hotfix. For now, hide the updates and move along.
My System SpecsSystem Spec
14 Aug 2014   #20
phainopepla

Windows 7 Ultimate x64
 
 

I had also started a thread on MS and someone posted a hot fix link from MS as a solution that fixed them up. It didn't help me, however:

BSOD after August 12 Windows Updates
My System SpecsSystem Spec
Reply

 BSOD Error 0x50 After New Windows Update




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD windows 7 error 0x50
Problem signature Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.768.2 Locale ID: 13321 Files that help describe the problem (some files may no longer be available) 110814-17846-01.dmp sysdata.xml View a temporary copy of these files
BSOD Help and Support
BSOD - error 0x50
All right, I've got a new computer two weeks ago and I've already got myself two BSOD's. They happen at random, and not very frequently but they are worrying and annoying as hell. The only thing I've added to my new computer is the Logitetch G710+ Keyboard. I know this can also be caused by...
BSOD Help and Support
BSOD: Page Fault Error 0x50 While Gaming
So I've been having terrible BSOD issues with a lot of different stop codes. Too lazy to work out the problem, I try a fresh install, just video drivers, nothing else. Works pretty well until this page fault error pops up. I have no idea how to read the dumps or anything, I'm pretty newb at this,...
BSOD Help and Support
BSOD on Shutdown - Error 0x50
I built a custom desktop last week (specs are in profile). I've had 3 BSODs in the last 10 days. (The 4th one was caused when I tried to use DriverVerifier) The most recent one happened after trying to shut down Windows. BlueScreenView shows them as Bug Check Code 0x50 PAGE_FAULT_IN_NONPAGED_AREA....
BSOD Help and Support
BSOD Fairly New PC, error 0x50
Hey guys, around 1.5 months ago I acquired a HP Pavilion Desktop PC (h8-1120a). Here is a "Story log" of the events of suspicious things that went around Day 2: In the morning when I booted it up, I got shone by the HP sign, then I went to a black screen with a flashing underscore, this went on...
BSOD Help and Support
BSOD when saving file, error 0x50
Hi, I sometimes get a bluescreen error when I try to save a file to the hard drive using a VST Host (musical instrument host) software called brainspawn forte (www.brainspawn.com). This software is a "host" for VST software instruments. The host runs, then loads DLLs that are each other...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App