|15 Aug 2014||#2|
Perform a Clean boot:
The goal is to test all the RAM sticks and all the motherboard slots.
Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.
If you get errors, stop the test and continue with the next step.
1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.If this stick passes the test then go to step #3.
2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.4. If you find a stick that passes the test, test it in all the other motherboard slots.
If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.
In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
Errors are sometimes found after 8 passes.
Memtest should be done overnight.
|My System Specs|
|Similar help and support threads|
External Hard Disk (packardbell) will not show in windows 7
Hej, My external hard disk up until a few weeks ago had been working perfectly. The next time I used it - windows 7 will not recognise it. I have tried different USB ports and computers. But it doesn't seem to work. It doesn't show up in device manager or disk manager. Its like nothing is...
|Hardware & Devices|
packardbell eaynote e4700 d need XP vga driver PLEASE help
I have a laptop here I that needs vga drivers I have downloaded a driver hereftp://ftp.download.packardbell.com/NOTEBOOK/EasyNote%20E4%20series/Driver/Xp/ but when I install it gives me a black screen after restart so I want into save mode and did a restore. Now i just need a real driver please can...
Computer hangs on startup screen packardbell
I just got a new graphics card i unistalled the old drivers of my nvidia 9600gt putted in my ati 5670 started up my computer now it hangs on the logo screen packard bell its a x1500 imedia if putted the old 9600gt back in but still have the same problem but when it hangs i can do nothing it does...
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd
All times are GMT -5. The time now is 02:48.