Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD Errors + Monitor Going to Sleep

14 Aug 2014   #1
ChaseColt

Windows 7 Ultimate 32bit
 
 
Multiple BSOD Errors + Monitor Going to Sleep

Hello there Windows 7 Forums users, I have encountered an unexpected problem that didn't start happening until 2 weeks ago, so prepare yourself for an adventure because it's quite the journey.

Problem:
Starting two weeks ago, I have encountered a Blue Screen of Death(BSOD) for the first time in 2 years. I didn't get to see the file name/driver name since as soon as it showed the screen it skipped all the way to the bottom of the screen before I get a look. After that, whenever I tried to start my PC up, the monitor would not load the image, but instead says ""No Input Signal" and then "Monitor Goes to Sleep". It does this everytime I tried to start it up, so I kept on force shutting it down using the button and starting it up again. Only to get another Blue screen. After trying again and again, it worked and my PC is fine...only to suffer the same problem over and over again when I start my PC up.

Keep in Mind:

- There are mutiple types of Blue Screen errors, not just constant type. (EX: Multiple_IRP_Requests, Driver_IRQL_Less_or_not_equal, Memory_management_Error, and many more except I forgot the problems)

- There is no boot image when I start the PC up, just "Monitor is Going to Sleep"

- My settings on my PC makes it so that Monitor will not go to sleep ever

- Sometimes a blue screen will appear, but it won't show it, instead it'll freeze my PC.

- I have tried updating drivers and it says all drivers are updated. There was one that cannot work which was the Teredo Tunneling Adaptor/Psuedo-Interface, but I uninstalled it and the problem still occurs.


I need a solution. Please help, and I lost my Windows 7 Disc,so that's not a factor anymore. Thanks


My System SpecsSystem Spec
.
15 Aug 2014   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums
My System SpecsSystem Spec
15 Aug 2014   #3
ChaseColt

Windows 7 Ultimate 32bit
 
 

Attachment 329357

Here is my ZIP File
My System SpecsSystem Spec
.

15 Aug 2014   #4
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

ZIP file is incomplete. Please follow this, and let it finish collecting the information. Don't interrupt it.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

My System SpecsSystem Spec
16 Aug 2014   #5
ChaseColt

Windows 7 Ultimate 32bit
 
 

Alright, since this one has more TEXT Documents, I'm pretty sure this is the complete one. Attachment 329415
My System SpecsSystem Spec
16 Aug 2014   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Code:
BugCheck A, {0, 2, 1, 83a7ec24}

Probably caused by : hardware ( rdyboost!SMKM_STORE<SMD_TRAITS>::SmStWorker+64 )

Followup: MachineOwner
---------
Code:
BugCheck A, {84bfffb0, 2, 1, 83aacffc}

Probably caused by : memory_corruption ( nt!MiUnlinkFreeOrZeroedPage+c9 )

Followup: MachineOwner
---------
Code:
BugCheck 44, {881c6318, eae, 0, 0}

Probably caused by : iaStorV.sys ( iaStorV+45215 )

Followup: MachineOwner
------------------------------------
    Image name: iaStorV.sys
    Timestamp:        Fri Jun 11 06:15:02 2010 (4C11870E)
One more important thing is the BIOS date. 3/28/2008. Was this machine a Vista OEM and later upgraded to Windows 7 Ultimate?

First thing, as the computer is old, report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

If the heat is under control, then we would start with the iaStor thing. It might be critical as it is used as RAID mode, as Intel(R) SATA RAID Controller.

So first let us know about the system heat.

Also wait for what Golden suggests.
My System SpecsSystem Spec
16 Aug 2014   #7
ChaseColt

Windows 7 Ultimate 32bit
 
 

http://speccy.piriform.com/results/0...musbEYIwWanBPc

This is when I'm not playing any games, but when I do the graphics card go up to 70 but below 75 C
My System SpecsSystem Spec
17 Aug 2014   #8
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Temps are good enough for an old computer.

Next thing is the iaStor issue. Intel Rapid Storage. That is used as RAID mode there. It might be a long lasting problem. To resolve the issue, the best thing that can be done is to change the storage controller mode.

Boot into the BIOS. Go to Advanced settings. Change the storage controller mode to AHCI. If AHCI is not available, change it to IDE/ATA whatever is available. Save and exit.

But then your computer will not boot to windows at all. Because windows can boot to the storage controller mode on which it was originally installed. And at this point you have to perform a clean reinstall.

That Clean Reinstall is necessary. Not only to remove the RAID controller which is a big part of the issue, but also it will discriminate between the hardware issue and driver/software issue. We have seen that hardware is also flagged as probable cause earlier. If the issue continues even after the clean reinstall, that it s hardware.

So let us know the situation.
My System SpecsSystem Spec
17 Aug 2014   #9
ChaseColt

Windows 7 Ultimate 32bit
 
 

For the Clean Install, most of of the program's content are Display Drivers so will I have to reinstall my Nvidia Geforce GT 610?

Also, I misunderstood your earlier statement. If you change the storage controller mode, then it wouldn't boot to Windows at all...and this is when you use this program? Or you can just use this program right away?
My System SpecsSystem Spec
17 Aug 2014   #10
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

To remove the RAID mode iaStor, you have to change the storage controller mode as suggested.

After doing it, windows will not boot at all.

So, a clean reinstall will be needed.
My System SpecsSystem Spec
Reply

 Multiple BSOD Errors + Monitor Going to Sleep




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Monitor going to sleep then BSOD and reboot. .DMP can someone read it?
I have two Dell Optiplex 170L desktops that had XP and I just installed Windows 7 as well as installing different video cards (Nvidia GE Force 6200 with 512mb) for both Dells so Windows 7 would work. Both Dells while browsing the internet with IE11 or Firefox are randomly flashing "monitor going...
BSOD Help and Support
Various BSOD errors during normal use and sleep
Latest Error Message: PAGE_FAULT_IN_NONPAGED_AREA Hi. I upgraded my computer a few weeks ago with a new motherboard, CPU, RAM, and SSD, and lately I have been having various BSOD errors. They seem to happen at random, and often I will come back to my computer with it having the BSOD error...
BSOD Help and Support
BSOD plus restart from sleep mode and shutdown errors
Hello All, I am totally new to this and am really confused. About maybe a week ago I started having BSOD, plus Windows wouldn't restart after going into Sleepmode, and when I tried to Shut Down it would bring up the shut down screen then just keep "shutting down" with out ever shutting down. ...
BSOD Help and Support
BSOD with shut down/sleep mode, multiple errors
Hello! Thank you for the help. About a week after purchasing this laptop, I started getting BSODs when shutting down or going into sleep mode. It has increased in frequency recently. Each BSOD pops up with multiple errors.The .zip file attached has the dump files, but not a system health report...
BSOD Help and Support
BSOD after resuming from sleep. Various Errors.
I have a refurbished Dell XPS 15 laptop from 5 months. Every time i resume my windows from sleep, after a few minutes i got different Blue Screen errors. I've re-installed my OEM windows, once (from recovery Partition) but still the same errors. I've attached my mini-dumps files, with the report...
BSOD Help and Support
Sleep Mode errors - system won't sleep, 12 errors in energy-report
Issue at large: Win7-64 won't go into sleep mode. Recent issue in last week. Also seems to be automatically resetting from Balanced power mode to High Performance? Below is the energy-report.html results, if they're helpful: Power Efficiency Diagnostics Report Computer Name HOME-PC Scan...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App