Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Could you help prevent crashes and BSOD/Page fault in nonpaged area?

29 Sep 2014   #21
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Well, then the next thing will be to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any.


My System SpecsSystem Spec
.
29 Sep 2014   #22
Phrozt

windows 7 ultimate 64
 
 

Sounds fun! I'll let you know the results.
My System SpecsSystem Spec
30 Sep 2014   #23
Phrozt

windows 7 ultimate 64
 
 

Well I got one... (rename the attached to .dmp). Looks like it's caused by dne64x.sys. I looked this up and it didn't really surprised me it was cisco VPN related (deterministic network). I've seen problems w/cisco DNE stuff on work computers before.

It would also make sense that I'm seeing a correlation between network issues and a computer freeze at the exact same time.

I'll uninstall Deterministic Network Enhancer from the adapter, but I'm a bit worried that some part of it will stick around, as Cisco has practically become synonymous to malware for me lately. Any tips?
My System SpecsSystem Spec
.

30 Sep 2014   #24
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

OK, have a look in registries as said in Laptop Management

Hopefully it will wipe Deterministic up from the system.
My System SpecsSystem Spec
30 Sep 2014   #25
Phrozt

windows 7 ultimate 64
 
 

I'm working on that, but there's a question:
On step 8, it mentions: "The Original Equipment Manufacturer (OEM) enumerations of the dne2000.inf and dne2000.pnf files. The OEM enumeration .inf file is a file called oem<some numeric value\.inf. For example, files could be called oem2.inf and oem2.pnf."

I have oem0 - oem142, so how would I know which ones correlated to the dnf dll? (which, btw, mine was dne64x.sys, not dne2000.sys, and there were no .inf files for it).

Also, I was going fine all morning, but did have another lock up, even after killing DNE. No blue screen, just another lock up. I also just disabled verifier.exe, since it seems it got the only blue screen my system was going to throw.
My System SpecsSystem Spec
01 Oct 2014   #26
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Phrozt View Post
I'm working on that, but there's a question:
On step 8, it mentions: "The Original Equipment Manufacturer (OEM) enumerations of the dne2000.inf and dne2000.pnf files. The OEM enumeration .inf file is a file called oem<some numeric value\.inf. For example, files could be called oem2.inf and oem2.pnf."

I have oem0 - oem142, so how would I know which ones correlated to the dnf dll? (which, btw, mine was dne64x.sys, not dne2000.sys, and there were no .inf files for it).
Search trhough the registry for deterministics ... delete all the items.

Quote   Quote: Originally Posted by Phrozt View Post
Also, I was going fine all morning, but did have another lock up, even after killing DNE. No blue screen, just another lock up. I also just disabled verifier.exe, since it seems it got the only blue screen my system was going to throw.
OK, use the computer normally now, let us know for any further BSOD.
My System SpecsSystem Spec
01 Oct 2014   #27
Phrozt

windows 7 ultimate 64
 
 

It has frozen 3 times since the last post. Again, not a BSOD, but a full freeze.

I see several references to deterministic in regedit, but I don't know if I should delete them, and the post you referenced does not mention them.
My System SpecsSystem Spec
01 Oct 2014   #28
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If you think that the leftovers of deterministic is causing the issue, it will be the best to start afresh.
Clean Reinstall - Factory OEM Windows 7

Personally I dont use VPN, so I dont have very much experience about it.
My System SpecsSystem Spec
01 Oct 2014   #29
Phrozt

windows 7 ultimate 64
 
 

I'm not so sure it's the DNE... it may be to the point that it's hardware...
My System SpecsSystem Spec
01 Oct 2014   #30
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Let the Driver Verifier to run for one more time?
My System SpecsSystem Spec
Reply

 Could you help prevent crashes and BSOD/Page fault in nonpaged area?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Help with BSOD (page fault in nonpaged area)
Hi guys, I really need some help here! I left my computer running overnight and after some Windows Update it has been giving me BSOD on startup, it doesn't even get to the login page, just BSODs. On Safe Mode it works fine but It wouldn´t start with a clean boot or diagnostics boot, just BSODs...
BSOD Help and Support
BSOD page fault in nonpaged area
hi Getting page fault in nonpaged area bsod every morning, this is on a new build. If I reformat or move my ram to different slots everything is fine, play games browse etc, turn the pc on the next morning 12 hours later, laggy windows, chrome crashes repeatedly then get the bsod. Was...
BSOD Help and Support
bsod page fault in nonpaged area
hey there been looking around online as to what i can do regarding this bsod. its been happening very frequently rarely whenever it happens does it happen immediately a second time but rather after 30 minutes or so of my pc being on. ive posted the zip below; steps ive done already are cmd chkdsk,...
BSOD Help and Support
BSOD (Page Fault in Nonpaged Area)
Recently go a new computer (one thats built). Installed drivers, updated windows, everything yet it still seems to get a bluescreen. Only happens in the mornings and all I need to do is shutdown and restart and no more bluescreens for the rest of the day. Windows 7 Home Premium 64bit AMD Phemon...
BSOD Help and Support
Page fault in nonpaged area (bsod)
Lately I've had a couple BSODs, both only while gaming. The games seem to freeze up and i can get no response from my pc. After a few moments i get a BSOD and it dumps physical memory and reboots. the name is 'PAGE FAULT IN NONPAGED AREA' I've uploaded the most recent minidump, can anyone tell...
BSOD Help and Support
BSOD - page fault in nonpaged area - pls pls help
I have just built my dream custom PC Windows 7 x64 Ultimate Ga-x58a-ud3r MB and 6GB corsair ram Gtx 460 SLI SSD (ocz sata 2) (boot) none raid SSD (crucial sata 3) Samsung F3 1TB (storage) 850w Corsair PSU.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 08:18.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App