Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Help and Support

25 Aug 2014   #1
wethinkcomputer

Windows 7 Enterprise 64 bit
 
 
BSOD Help and Support

Daily and Nightly BSOD. Don't know where to start or what to do!

Any help would be appreciated.


My System SpecsSystem Spec
.
31 Aug 2014   #2
HarriePateman

Windows 7 Ultimate 64-bit
 
 

Hello and welcome to sevenforums.

Here is a Debug of your BSOD:

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 109, {a3a039d8953434e8, 0, 60bce1231033fd17, 101}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
 or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
 debugger that was not attached when the system was booted. Normal breakpoints,
 "bp", can only be set if the debugger is attached at boot time. Hardware
 breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d8953434e8, Reserved
Arg2: 0000000000000000, Reserved
Arg3: 60bce1231033fd17, Failure type dependent information
Arg4: 0000000000000101, Type of corrupted region, can be
	0 : A generic data region
	1 : Modification of a function or .pdata
	2 : A processor IDT
	3 : A processor GDT
	4 : Type 1 process list corruption
	5 : Type 2 process list corruption
	6 : Debug routine modification
	7 : Critical MSR modification

Debugging Details:
------------------


CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0x109

PROCESS_NAME:  System

CURRENT_IRQL:  0

ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) x86fre

STACK_TEXT:  
fffff880`031ff5d8 00000000`00000000 : 00000000`00000109 a3a039d8`953434e8 00000000`00000000 60bce123`1033fd17 : nt!KeBugCheckEx


STACK_COMMAND:  kb

SYMBOL_NAME:  ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: Unknown_Module

IMAGE_NAME:  Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP:  0

IMAGE_VERSION:  

BUCKET_ID:  BAD_STACK

FAILURE_BUCKET_ID:  BAD_STACK

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:bad_stack

FAILURE_ID_HASH:  {75814664-faf6-4b70-bbc7-dc592132ecdd}

Followup: MachineOwner
---------
This is a very complex Bluescreen of Death.

Please can you user your windows disk and do a start up repair.

Startup Repair - Run 3 Separate Times
My System SpecsSystem Spec
Reply

 BSOD Help and Support




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Help and Support
Hello all. I'm new to sevenforums and am hoping to find out what is behind my BSOD! I strongly suspect that this may be a HDD failure because according to Piriform's Speccy, my HDD is running hot. In any case, I have attached the .zip file as instructed. Thank you in advance!
BSOD Help and Support
BSOD, could be from Adobe support?
Hello. Im an old time mac user that recently migrated. A few days ago I had some problems with a new update for Adobe Premiere Pro and cintacted the support chat at Adobe. They asked me to install TeamViewer so that they could try to locate the problem via remote. The computer crashed a couple...
BSOD Help and Support
BSOD Support :(
Hey, i've used these forums a couple times now and really appreciate the help you guys have given me so far (thanks!!). Hopefully this is the last time i'm going to have to use these forums! I'm about to sell my PC, and don't want the new user to experience any of the problems I have been...
BSOD Help and Support
BSOD error 124 support
hi, when i try starting any games i my computer just frezees, so i do a hard reboot and when i return to windows i get an a box saying i jut had a BSOD i have tried the following re-installing gfx drivers disabling onboard audio (i'm using a sound card) still with the same result ...
BSOD Help and Support
Random reboot (BSOD) - tech support no help
I have Lenovo with about 2 weeks of warranty left. I religiously run all Windows and Lenovo updates, unless the drivers are not indicated to provide any changes to my model. This laptop occasionally re-boots itself, always away from home such as in a hotel or public place, regardless of battery or...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:18.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App