Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD with blame on ntoskrnl.exe and ntkrnlmp.exe

20 Feb 2015   #61
Ray2003

Windows 7 Home Premium x64 Service Pack 1
 
 

Hi everyone. My computer BSOD'd again with only the ethernet cable connected. It actually froze while it was supposedly collecting the crash reports. I noticed there was no minidump file in the minidump folder but WhoCrashed (I know, I know, Arc, you hate the program but I ran it before I checked the minidump folder) showed the following, which is strange because where did it get this info from. With the zip file, I also included a camera of the frozen BSOD screen (which never stopped/started collecting the crash info).

On Fri 2/20/2015 1:43:39 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!IoFreeWorkItem+0x8AC)
Bugcheck code: 0x7E (0xFFFFFFFFC0000005, 0xFFFFF8000363BFED, 0xFFFFF880009A99D8, 0xFFFFF880009A9230)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug check description: This bug check indicates that a system thread generated an exception that the error handler did not catch.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.



My System SpecsSystem Spec
.
20 Feb 2015   #62
gregrocker

 

Did you remove the wireless card?
My System SpecsSystem Spec
20 Feb 2015   #63
Ray2003

Windows 7 Home Premium x64 Service Pack 1
 
 

Yes, the wireless card is NOT in the computer.
My System SpecsSystem Spec
.

21 Feb 2015   #64
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi Ray. I dont hate WhoCrashed. I just think that is is not efficient in reading a crash dump.

As per the camera snap, the crash dump is not recorded. So there is no new crash dump in the folder.

No network related issue is there after 17th.

Anyway, there are two things common between a stop 0x1E and stop 0x7E, a BIOS bug and a remote control program.

If you have any sort of remote control program installed, uninstall it as a test.

Also, check with gateway that if there is any BIOS update available for your model. http://panam.gateway.com/product/def...x?modelId=2294 .... apparently it seems to me that there is a scope for it. Your BIOS is ....
Code:
BiosVersion = P01-A3        
BiosReleaseDate = 05/17/2010
There is an update available ....
Attachment 350366
Please be aware that the BIOS updates are risky. If you dont have any previous experience with it, dont do it yourself. Take assistance of anybody who knows about it, or even you may call a technician to do it for you.

As it is an old branded desktop, two more questions will be there .....

► Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator - The most trusted PSU Wattage Calculator
Also let us know the wattage of your PSU.

► Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Let us know the results.
My System SpecsSystem Spec
22 Feb 2015   #65
Ray2003

Windows 7 Home Premium x64 Service Pack 1
 
 

Thanks. I'll do these steps and get back to you within a few days!
My System SpecsSystem Spec
23 Feb 2015   #66
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

OK, no problem. You are welcome.
My System SpecsSystem Spec
11 Mar 2015   #67
Ray2003

Windows 7 Home Premium x64 Service Pack 1
 
 

Thanks for the update and major apologies for taking so long to implement them. I've been busy and lazy. Anyways . . .

I've downloaded both the screenshot Bios updates but could only update one of them (the first one dated 10/04/2010). The other one, when I hit "flash" on the updater, says, "Error: Can't analyze the IIM Information." Should I figure out a way to install this second part of the BIOS update (dated 08/03/15)?

As far as I know, I have no remote control program.

I went on the eXtreme Power Supply Calculator, and I put in the info as best I could, and the site told me 290W for recommended PSU Wattage.

Here is the Speccy snapshot URL:

http://speccy.piriform.com/results/E...oBX6BqHdP21BRV

I've had one BSOD since the last message, and it didn't record it as a minidump. Please advise. Thank you so much!
My System SpecsSystem Spec
12 Mar 2015   #68
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

You updated the BIOS with the right one.

Now it is an waiting game. Wait and see how it goes. Report us for any necessity about the issue.
My System SpecsSystem Spec
Reply

 BSOD with blame on ntoskrnl.exe and ntkrnlmp.exe




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD ntoskrnl.exe & ntkrnlmp.exe
Hello sevenforums community, This is my first time posting. I came across BSOD problem that I have been having fairly often. I tried replacing hard disk, reloading OS multiple times but the problem persists. I ran WhoCrashed and below is the report I got. Thank you in advance. On Thu...
BSOD Help and Support
BSOD, (ntoskrnl.exe, ntkrnlmp.exe)
hi, i have been getting a couple of BSOD's when ive been gaming, my monitor would go pink or freeze and ill hear a loud buzzing sound, then i switched to my integrated graphics and its been working fine. but lately, when im watching some series on my dell monitor that i have hooked up to my laptop,...
BSOD Help and Support
BSOD ntoskrnl.exe and ntkrnlmp.exe
Hi - I am experiencing random BSOD which seemed to have started with AMD Catalyst software. After running WhoCrashed and researching forums, I deleted the driver and software, and installed just the driver. Seems to fix the PNP error, but still getting the Driver Power State Failure. Latest...
BSOD Help and Support
Random BSoD, Driver Power State Failure, reports blame ntoskrnl.exe
Hello and thanks for letting me post on this awesome forum!!!! I am fixing a family members computer and it has stumped me. I have tried everything that I can find online related to my problem outside of reinstalling but I think it could be a hardware (power or memory) issue from what i read and...
BSOD Help and Support
Help with random BSOD. ntoskrnl.exe to blame
Hello, I have been doing my research before posting, but like most pc issues, there is never a definitive answer or the solutions are different depending on the user's system specs. I get the random BSOD for the last month. Some days it may happen 4 times and then it might not happen at all...
BSOD Help and Support
Random BSOD - ntoskrnl.exe to blame?
Hi, I have been experiencing some BSOD issues lately. They seem to happen randomly. I have also been noticing that my computer is have some slow hangs at periods, but it's rare and I can't pinpoint as to when it happens. I have attached the zipped contents of my C:\Windows\Minidump folder. ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App