Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD's at random times often error 0x0000001E

28 Aug 2014   #1
griachae

Windows 7 Ultimate 64 bit
 
 
Random BSOD's at random times often error 0x0000001E

Hello,
after searching through many forums and Windows help sites i still can't help myself to find, why i am getting these bluescreens. I even installed Windows completely new, but after installing the Realtek GBE network driver (manually, cause Windows didn't find it) the 'fun' began again. I removed all Realtek drivers again and installed the latest i could find on the Realtek site and it seemed to run smoothly. Then i downloaded all the other drivers like the AMD Graphics and Soundblaster Z driver and installed them. The BSOD's came/come completely random. Today i've been able to play three Dota 2 matches without any problems, then 15 minutes later again. I also have to say this system ran like this for half a year without almost any problems or BSOD's. It somehow became slow and i tried stuff, broke it and now it seems still broken, although i formatted the drive and reinstalled Windows.

I've tried to debug the minidumps myself but it says something different evertime (I'll add the dmp files at the end, although there has not always been one created after a BSOD). I've tried reinstalling all the drivers and no help. I've put all stuff from AMD/ATI into the exception of Avira Antivirus, because i've read there might be interferences.

I ran MEMTEST86+ for like 3 hours - no errors. I have ran disk scans - nothing.

The BSOD is different every time. The time i get it is completely random. The only common i could recognize is that STOP: 0x0000001E (0x0000000000000, 0x0000000000000, 0x0000000000000, 0x0000000000000) seems to happen every fifth time or so. I also recognized that after a BSOD the sound is completely disabled until i restart, then everything is fine, except that the windows start up sound is stopping playback after some miliseconds.

The system specifications should be all in my profile. All Windows Updates have been installed and all drivers should be up to date.

Please help me im getting frustrated(got a BSOD while writing this, like if it doesn't want to get help).

Thanks in advance


My System SpecsSystem Spec
.
28 Aug 2014   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Please follow Blue Screen of Death (BSOD) Posting Instructions and upload the results with your next post.

Code:
CUSTOMER_CRASH_COUNT:  1
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
BUGCHECK_STR:  0x1E
PROCESS_NAME:  avguard.exe
CURRENT_IRQL:  2
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
That is your Avira Anti virus

Code:
*** WARNING: Unable to verify timestamp for avnetflt.sys
*** ERROR: Module load completed but symbols could not be loaded for avnetflt.sys
 avnetflt+0x7000
fffff880`069f29d8  fffff880`069f2c88
fffff880`069f29e0  fffff880`069f2c00
fffff880`069f29e8  fffffa80`120aa388
fffff880`069f29f0  fffffa80`1209ba10
fffff880`069f29f8  00000000`00000001
fffff880`069f2a00  fffffa80`120aa350
fffff880`069f2a08  fffff880`02636511 avnetflt+0x4511
Avira again. Uninstall Avira with the Avira Removal Tool Avira AntiVir Removal Tool - Download

Code:
STACK_COMMAND:  kb
FOLLOWUP_IP: 
nt!KiKernelCalloutExceptionHandler+e
fffff800`02a7d5be 90              nop
SYMBOL_STACK_INDEX:  1
SYMBOL_NAME:  nt!KiKernelCalloutExceptionHandler+e
FOLLOWUP_NAME:  MachineOwner
IMAGE_NAME:  hardware
DEBUG_FLR_IMAGE_TIMESTAMP:  0
IMAGE_VERSION:  6.1.7601.18409
MODULE_NAME: hardware
FAILURE_BUCKET_ID:  X64_IP_MISALIGNED
Code:
lmvm atikmdag
start             end                 module name
fffff880`11088000 fffff880`11f98000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Thu Apr 17 21:13:16 2014 (53508A3C)
    CheckSum:         00EAEEE6
    ImageSize:        00F10000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your Graphics card. Please download the latest WHQL or and earlier WHQL driver if you have the latest. Then uninstall your current drivers, after that follow this tutorial Drivers - Clean Left over Files after Uninstalling and select ATI Display Drivers only. Then install the new driver you just downloaded, but this time select custom install, only install the things you actually use and need. The only think you actually need is the Display Driver, you do not need CCC. Try that and see if it is any better.
My System SpecsSystem Spec
29 Aug 2014   #3
griachae

Windows 7 Ultimate 64 bit
 
 

Thank you very much my Jedi Master for this this fast and informative reply, i'll try that as soon as i'm getting home.

There's currently a MEMTEST86+ running, because i wanted to put the RAM completely off the guilty list. This morning after 8 hours it was still without errors, but to make sure i'm gonna let it run a few more hours until i'm home again.

Anyway you're saying its the Avira Software and the ATI Graphics driver. Does that mean i can hope all the hardware components like soundcard, cpu, mainboard itself and graphics card are okay?

I am asking this because here:

Quote:
Code:
STACK_COMMAND:  kb
FOLLOWUP_IP: 
nt!KiKernelCalloutExceptionHandler+e
fffff800`02a7d5be 90              nop
SYMBOL_STACK_INDEX:  1
SYMBOL_NAME:  nt!KiKernelCalloutExceptionHandler+e
FOLLOWUP_NAME:  MachineOwner
IMAGE_NAME:  hardware
DEBUG_FLR_IMAGE_TIMESTAMP:  0
IMAGE_VERSION:  6.1.7601.18409
MODULE_NAME: hardware
FAILURE_BUCKET_ID:  X64_IP_MISALIGNED
it only says something about hardware and an in the dmp files often appearing ntkernel.

Quote:
Uninstall Avira with the Avira Removal Tool Avira AntiVir Removal Tool - Download
The tool you link there is not a removal tool for Avira itself it's a removal tool for virus or malware right ?
I guess you're talking about something like that: Antivirus Remover ?

Last question: Should i use the beta driver af ATI ? Because i recently updated my BIOS to the latest version and i'm thinking it may help to have the really latest graphics driver although its beta.
My System SpecsSystem Spec
.

29 Aug 2014   #4
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I guess you are correct about the Avira link. Memtest86+ should run for a minimum of 8 passes to be close to certain. The Avira and your graphics driver are what showed in the dump files you uploaded. As you point out, Hardware was also mentioned, and can't be ruled out right now. I hope you downloaded memtest from here Memtest86+ - Advanced Memory Diagnostic Tool. It is the best and most reliable memory test we have, and needs to be run for a minimum of 8 passes.

I still need the Blue Screen of Death (BSOD) Posting Instructions. Use option #2 and press the grab all and upload the results with your next post, please. Give it time, it takes a few minutes to complete.
My System SpecsSystem Spec
29 Aug 2014   #5
griachae

Windows 7 Ultimate 64 bit
 
 

So here are the files. Im now gonna try reinstalling WHQL graphics driver and uninstalling Avira as u told.
Btw MEMTEST86+ (yes i downloaded it from there) ran 14 hours and did 6.2 passes without a single error. I know u said minimum of 8, but i takes 2.3 hours for one pass and i don't have that much time.

Quote:
Should i use the beta driver af ATI ? Because i recently updated my BIOS to the latest version and i'm thinking it may help to have the really latest graphics driver although its beta.
EDIT: Reinstalling AMD WHQL screen graphics driver only(not the beta one) and uninstalling Avira completely was successful. Let' see how it goes. I want to install Avira again as soon as possible, because i had already too many shit going down, not having protection.
My System SpecsSystem Spec
31 Aug 2014   #6
griachae

Windows 7 Ultimate 64 bit
 
 

essenbe? The files u requested are at the end of my last post. Greetings
My System SpecsSystem Spec
31 Aug 2014   #7
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Every dump file shows the Windows Kernel as the cause, which isn't possible unless there have been some changes or corruption to the system files. Every dump file almost, shows a different error code, which in normal circumstances is usually memory.
Check and make sure your SSD firmware is up to date, also run Disk Check and run your Manufacturer's diagnostic tool for your other hard drives. You may be able to find it here Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp. otherwise you can use Seatools and run the short and long test.

Be sure to create a restore point before enabling this.

Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
information   Information

What is Driver Verifier:
It puts stress on the drivers, and therefore it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.


How we know that DV is enabled:
It will make the system bit slow and sluggish.
warning   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer.

If there are no Restore points, make a System Restore Point manually before enabling DV.


Tip   Tip




Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
01 Sep 2014   #8
griachae

Windows 7 Ultimate 64 bit
 
 

Both Harddrives passed the Seatools long test.

Latest BSOD:

STOP: 0x0000001E (0x0000000000000, 0x0000000000000, 0x0000000000000, 0x0000000000000)

again after 3 min of Browsing with Chrome Canary. Mindump file 090114-11546-01 in the zip. Going to use DriverVerifier now
My System SpecsSystem Spec
01 Sep 2014   #9
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

When you set driver verifier did you select all drivers not from Microsoft? What it's blaming is a Microsoft driver for your CPU.

Code:
 lmvm amdppm
start             end                 module name
fffff880`045c1000 fffff880`045d6000   amdppm     (pdb symbols)          c:\symcache\amdppm.pdb\AB154B73C6884E70807CA6407175368D1\amdppm.pdb
    Loaded symbol image file: amdppm.sys
    Mapped memory image file: c:\symcache\amdppm.sys\4A5BC0FD15000\amdppm.sys
    Image path: \SystemRoot\system32\DRIVERS\amdppm.sys
    Image name: amdppm.sys
    Timestamp:        Mon Jul 13 18:19:25 2009 (4A5BC0FD)
    CheckSum:         0001EA42
    ImageSize:        00015000
    File version:     6.1.7600.16385
    Product version:  6.1.7600.16385
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        3.7 Driver
    File date:        00000000.00000000
    Translations:     0409.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     amdppm.sys
    OriginalFilename: amdppm.sys
    ProductVersion:   6.1.7600.16385
    FileVersion:      6.1.7600.16385 (win7_rtm.090713-1255)
    FileDescription:  Processor Device Driver
    LegalCopyright:   © Microsoft Corporation. All rights reserved.
It is also listing your graphics card again.
My System SpecsSystem Spec
01 Sep 2014   #10
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Please disable driver verifier, then boot into windows after a reboot and

Open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Then re enable Driver verifier going by the instructions in the link above and select all drivers not supplied by Microsoft. Unselect anything that is supplied by Microsoft.
My System SpecsSystem Spec
Reply

 Random BSOD's at random times often error 0x0000001E




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD, error 0x0000001e
Hello all, I recently tried fixing a family friends computer, I reformatted and everything went fine for about 3 hour and then I started getting the 0x0000001e error at random intervals, I'd have it running on minecraft and nothing then I'd open spotify and it died, I then reset the computer and it...
BSOD Help and Support
Random BSOD problems in the past 2 days. Random errors at random times
Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty...
BSOD Help and Support
BSOD at random times, error 0x0000001E and 0x0000001A
Hi everyone, recently our desktop computer has started to crash and get the dreaded BSOD. Initially it appeared to be a problem with a driver for one of our phones, which I removed but the problem has resurfaced. Seems to be getting more regular and taking the computer longer to reboot and login...
BSOD Help and Support
Random BSOD during Random times, error 0x8000000000000002
Hey everyone, Im new here on this forum. I've been having this extremely frustrating problem ever since i swapped out my Motherboard for a new one. I reformatted my computer multiple times, yet my computer seems to BSOD randomly. What happenes is that everything becomes unresponsive; cant...
BSOD Help and Support
Random BSOD error 0x0000001e
I was on my comp for about... an hour or 2 and it BSOD'd it happened before but hasn't happened in a while til now i restarted it and its running good but i would like to know why its happening the error code is 0x0000001e i realize this won't fully help you guys so i included a system health...
BSOD Help and Support
BSOD at random times error 0x0000001e
Hello, first off i want to say thank you for viewing this thread, secondly i believe the error code was 0x0000001e (if not im sorry i uploaded as instructions of everything) I ran Memtest for atleast 10 hours and no errors what so ever. I have had problems with my Desktop ever since i did a...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 13:07.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App