BSOD's on WakeUp for Randomly - Bug Check Code 0x00000050

Hello Chap, I've looked at your dump files and found this

Code:

BugCheck 50, {fffffa80635d2ea8, 0, fffff800023f83e0, 2}
 
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiGetWorkingSetInfo+2b0 )

Code:

lmvm avgidsdrivera
start             end                 module name
fffff880`038ff000 fffff880`03942000   avgidsdrivera T (no symbols)           
    Loaded symbol image file: avgidsdrivera.sys
    Image path: avgidsdrivera.sys
    Image name: avgidsdrivera.sys
    Timestamp:        Tue Jun 17 09:06:18 2014 (53A04B5A)
    CheckSum:         0003FA27
    ImageSize:        00043000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

AVG IDS Application Activity Monitor Driver

First I'd like you to disable that part of AVG. if that does not help, please uninstall it and install MSE.

The Memory Corruption is what I'm most concerned about. If you have faulty ram or dim slots, none of the dump files that we go by are reliable or accurate.

Please Run Memtest86+

   Information

Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask

Chap, I would guess it will take 9-10 hours to complete 8 passes, and yes I know what a pain it is. I've been there myself many times. Be glad you're not like me and have 16 GB of ram. The only reason I asked you to run it so early in the diagnosis is because of the dump files blaming memory corruption. Usually, if you have a memory fault, the computer will blame whatever driver is most in use at the time. That's why, the ram is so important. If the ram is not right, every dump file will be wrong. Dump files are what we use to debug, so it helps if they give us good info.

Next open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

After you get through with that, Make a restore point first.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

What is Driver Verifier:
It puts stress on the drivers, and therefore it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How we know that DV is enabled:
It will make the system bit slow and sluggish.

   Warning

Before enabling DV, make it sure that you have created a restore point.
make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

As I am sure you realize, this is a trial and error system, but the best we have. We will just keep trying different things until we are at a point we can see what the real problem is. In this dump file it lists your Graphics card

Code:

lmvm nvlddmkm
start             end                 module name
fffff880`05c44000 fffff880`068d2000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Wed Jul 02 12:42:02 2014 (53B4446A)
    CheckSum:         00C4C7C9
    ImageSize:        00C8E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Please update your graphics driver. The link I am going to give you will tell you where to download it from, how to uninstall your current drivers and how to install the new ones. Just download the new drivers first. I know it will look complicated, but it is really simple and the way I do mine every time. It will hopefully give you a very clean install and not install anything you don't need.
NVIDIA Drivers - Avoid Problems