Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD shortly after startup, error 0x0000007e event 1001, BugCheck

06 Sep 2014   #11
hamarthas

 
 

I'm still a bit unsure on what you want to do. Essenbe said if i cant boot into windows try his suggestion, but if i cant boot into windows how to i go through the process of enabling AHCI or do you want me to enable this before going into the bios and changing the storage controller mode to AHCI,

Sorry for all the questions. First time fixing a BSOD.


My System SpecsSystem Spec
.
06 Sep 2014   #12
hamarthas

 
 

OK after reading through Essenbe's link again i answered my own question. He meant for me to do his suggestion first. Not sure how i missed that the first time reading through. SOrry for inconvience.
My System SpecsSystem Spec
06 Sep 2014   #13
hamarthas

 
 

Hello again, I just tried to do what Essenbe said but windows still could not boot when i changed the storage controller to AHCI in the bios. When i went to enable AHCI in the regedit i modified the start value from 3 to 0 for both msachi and iaStorV but still wasnt able to boot into windows using AHCI storage controller. I was just prompted to restore the computer to a earlier date or change the SATA operation back to Intel smart response technology. So i guess a clean reinstall is needed and im currently going through that process.
My System SpecsSystem Spec
.

06 Sep 2014   #14
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

hamarthas, What I gave Arc was just a suggestion to try as a last resort. Apparently it didn't work, so I suggest you proceed with Arc's suggestion. His will work.
My System SpecsSystem Spec
06 Sep 2014   #15
hamarthas

 
 

Hi i am doing the clean reinstall but i came into the problem of formatting the hard drives. Im also not sure on how to partition them. I have the forum post open on how to do it but the question im having is that the hard drives were together as a raid setup i think that being the reason i had the intel rapid storage driver, but now that i have booted it as AHCI is the way of formatting different?
My System SpecsSystem Spec
06 Sep 2014   #16
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

What do you want to do?
My System SpecsSystem Spec
06 Sep 2014   #17
hamarthas

 
 

Ok this is where im stuck
imgur: the simple image sharer

Are the way the hard drives are partitioned in the imgur meant for use with the intel rapid storage driver? But now i am going to use AHCI storage driver so would the way i have to format the hard drives be different? Or from here should i delete all the partitions and just install windows on Disk1 and ignore the other? Or should i Delete all the partitions and repartition the hard drives the same way they were originally?

Im clueless on how this needs to be any insight would be greatly appreciated.
My System SpecsSystem Spec
07 Sep 2014   #18
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

You are trying to format the Disc 1 Partition 3: OS.

Select it (it is already selected). Then click on "Delete". It will delete this partition and leave an unallocated space of the same size.

Now, select the unallocated space newly created, click on "New". The partition will be created.

Now, to install windows, follow the tutorial link.

My System SpecsSystem Spec
07 Sep 2014   #19
hamarthas

 
 

Thanks for the response Arc

So i want to keep DIsc 1 as 3 different partitions?
and what should i do about the other sections?
Should i make any changes to Disk 0?
Should I delete Disk 1 Partition 2: Recovery and make a new recover section?
Should i change Disk 1 partition 1 at all?
My System SpecsSystem Spec
07 Sep 2014   #20
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Disc 0 is the mSATA SSD. Keep it untouched for now (you may format it later, after the installation is done).

After doing a clean install, there is no valid ground to keep the factory partitions. So you may delete them all. But as it is your first attempt, better you keep them intact. Delete the OS partition only.

About the recovery partition, that is the System and Active partition. The master bootloader will be installed there automatically.

Apparently you need not to make any other changes right now.
My System SpecsSystem Spec
Reply

 BSOD shortly after startup, error 0x0000007e event 1001, BugCheck




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSODs (Bugcheck 0x0000001a Event ID 1001)
Hey guys, first time poster :) So I'm getting random BSODs for no apparent reason. I haven't updated anything recently myself except Nvidia Experience software; Windows updates itself. Looking in event viewer I get a Bugcheck error: The computer has rebooted from a bugcheck. The bugcheck...
BSOD Help and Support
BSOD shortly after startup - 0x0000007e
This error is occuring on an Inspiron HP mini laptop. The problem only happens when doing a normal windows boot, it does not occur when in Safe Mode. Windows will start up, and after a short period (usually 1-5 minutes) I will get the BSOD error. I've attempted uninstalling updates that had...
BSOD Help and Support
Windows 7 BSOD - BCCode 1e, BugCheck 1001
I've been having this problem for a couple of months, and it's recently gotten to at least 1 blue screen a day, to 1 every other day. I know nothing about the inner workings of my computer, and it can't be overheating because I have my tower in an optimal position with a fan blowing on it. It...
BSOD Help and Support
Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a
Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen...
BSOD Help and Support
Random Event 1001 Bugcheck 0x00000116 reboots, did not see bluescreen
Hello, I've been experiencing seemingly random crashes and auto-restarts of my computer that started a couple months ago. When it crashes, the video feed to my monitors stops so they go dark and say no signal and any sound that was playing begins stuttering; after about 10 seconds my computer...
BSOD Help and Support
Event Id 1001 BugCheck
So i recently built my computer and have been having a lot of trouble with Windows 7 (Im using the RC Build 7100) I use my computer for mainly gaming and not much more while Im playing games my computer tends to crash. At first I thought it was this Critical Error Event ID 41(The system has...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App