New
#1
Repeated BSOD after motherboard change
I recently changed the motherboard on my Toshiba Qosmio F60.
Maybe a week or so after the replacement I had my first BSOD. Error number 0024 - which I believe is a hardware related issue.
Anyway, I checked some forums online and they said this might be an overheating issue, so I installed SpeedFan and the temperatures my system was running at were around 80-95 degrees.
I then proceeded to change the power settings in the BIOS. This reduced running temps to between 45-60 degrees. I reduced processor speed and certain othr parameters and it worked fine for a while. recently its started acting up again.
The situation is such that if the settings are anything but the following then the BSOD is a guarantee within 5 minutes of boot up.
The only settings with which it works are - Under Power Management - Dynamic CPU Frequency Mode - Always Low.
Core Multi Processing - Disabled
Intel Turbo Boosts - Disabled.
And under BIOS Power Mangement - Processing Speed - Always low.
If I change even one of these parameters the BSOD invaribly shows up.
I don't know if its relevant but my laptop battery is due for replacement. Not sure if that is a contributing factor.
Attached are the log files.
Please help.
Thank you.