Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b

17 Sep 2014   #111
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

I ran IPDT several times now and get a PASS. I will now install and try my application.

While running prime95 and IPDT, I noticed that instead of 3.2GHz, the processor is run at 3.5GHz and at some stages during IPDT at 3.8GHz.and even 4.0GHz according to the results text file. How is that possibly possible? I never touched the BIOS after flashing it several times along my three week journey...


My System SpecsSystem Spec
.
17 Sep 2014   #112
HarriePateman

Windows 7 Ultimate 64-bit
 
 

Quote   Quote: Originally Posted by Useless User View Post
I ran IPDT several times now and get a PASS. I will now install and try my application.

While running prime95 and IPDT, I noticed that instead of 3.2GHz, the processor is run at 3.5GHz and at some stages during IPDT at 3.8GHz.and even 4.0GHz according to the results text file. How is that possibly possible? I never touched the BIOS after flashing it several times along my three week journey...
Possibly Turbo mode?
My System SpecsSystem Spec
17 Sep 2014   #113
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

Turbo… as in a Porsche Cayenne? I never touched the BIOS and physical mainboard switches. Maybe the "optimised defaults" in ASUS' BIOS are overclocker-friendly? I will take a look now…

…ok, it's set to "Normal", not "ASUS Optimal". When looking (only looking!) at the "Ai Tweaker" menu in Advanced Mode, there are two yellow lines of print on top: "Target CPU Turbo-Mode Speed: 3800MHz" and "Target DRAM Speed: 1600MHz". In the Advanced Mode's "Advanced" menu and (why?) "Ai Tweaker" menu, I see that Turbo Mode is enabled. So I better disable that.
My System SpecsSystem Spec
.

17 Sep 2014   #114
HarriePateman

Windows 7 Ultimate 64-bit
 
 

Yes its probably best while we are testing, turbo mode (when your CPU is at high usage so it ramps up the GHZ)
My System SpecsSystem Spec
17 Sep 2014   #115
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Turbo mode is completely normal. If you've ever noticed the CPU clocks down very low while idling. Normal speed is something like 3.2 for your chip, I don't really recall. It then has a turbo mode which ramps up when you need extra power. It is not being overclocked at all, it is the normal mode. The way the CPU and chipset is designed to work. I would leave it enabled. Intel designed it to do that. Little power when it isn't needed more power when it is needed. It is made to work that way.
My System SpecsSystem Spec
17 Sep 2014   #116
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

Yes, actually says so in the leaflet that came with the processor. Was just wondering if the BIOS was bogus.

Well, my application is installed and works, albeit I see not in Intel's "Turbo Mode", but "only" at 3.5GHz. Maybe because the application is set to compute in low priority mode; anyway, let's see how it goes...
My System SpecsSystem Spec
17 Sep 2014   #117
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Yours will drop pretty low at idle, 3.2 on a normal load and turbo @3.8 or so, depending on how your board sets it up. Maybe slightly more or slightly less.

I have an Ivy Bridge i7-3770K at stock, (which mine has never seen ) I drop to 1.6GHz idling on the desktop, 3.5 normal and somewhere around 3.8-3.9 on Turbo. Yours works similar, just a lot stronger and more cores and threads.
My System SpecsSystem Spec
19 Sep 2014   #118
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

I am running my application and use an internet browser since two days now.

Since the re-install, the application crashed once (not Windows) for a reason I can't know, and I had one BSOD 0x9c MACHINE_CHECK_EXCEPTION when scrolling through the Windows Event Viewer while Adobe was installing Flash.
My System SpecsSystem Spec
19 Sep 2014   #119
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Upload the Blue Screen of Death (BSOD) Posting Instructions and I'll look at it tomorrow. But it seems everything is going better, doesn't it? Not that any BSODs are OK, but it seems there is an improvement don't you think? Just make sure your Windows Updates are installed and up to date. Also please

Open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.
My System SpecsSystem Spec
19 Sep 2014   #120
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

Cheers, please find attached the ZIP-file from SF Diagnostic Tool.

Surely things have improved, if that single BSOD is "ok-ish" if off a minor cause (Event Viewer and Flash install). Windows is updated. As has always been the case, before the first and second re-install and after, sfc /scannow yields no errors.

By the way, what I still do not understand, not that it is the critical issue here, is why the 3.2GHz stock speed CPU only runs at 3.5GHz and not 3.8GHz, because in the BIOS "Turbo Mode" is set to automatic instead of disabled. IPDT output text file reports that even 4.0GHz was tested. How would I enable "Turbo Mode" if the BIOS setting does not seem to induce it?
My System SpecsSystem Spec
Reply

 BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD 0x0000001e and 0x0000000a
Hi, I am getting frequent BSODs when the PC is idle or under load (it runs a light simulation software, no games, internet browser, etc.). Although enabled, no minidump is written, hence I can't zip one up and post it here. What I did so far (multiple times, spending too many days): I...
BSOD Help and Support
BSOD: 0x00000050 ,0x0000003b
Hello, I am getting bluescreens. I was cleaning computer and after plugging computer I got bleuscreen after 5mins of running ~ I didnt check which error it was :(. I decided to try reinstall everything so I installed Windows again. I did it, installed drivers and after playing game I got error...
BSOD Help and Support
BSOD 0x00000050 and 0x0000000a when playing games
Hello. I've been getting blue screens recently when playing games. Ntoskrnl.exe has been in all of the crash dumps and the bug check codes have been either 0x0000000a and 0x000000050. Win32k.sys has also appeared in the crash dumps. This hasn't happened during every game but it happens...
BSOD Help and Support
BSOD on start up, error 0x0000000a , 0x00000050
Problem description My problem is as follows: When the computer has been turned off for at least a few hours, I'm getting BSOD's while booting but it is rarely. When cold booting (computer has been turned off for at least several hours), I get a BSOD just after the Windows 7 `Starting...
BSOD Help and Support
BSOD at random, errors 0x0000001e, 0x00000024, 0x0000003b, 0x00000050
While the system is at idle or just light use I get the BSOD. It happens once a day and there seems to be no trigger. Core temps are at normal and run about 40 Celsius. I have tried updating most of my drivers through the device manager and will run a memtest soon. Any and all help is much...
BSOD Help and Support
Random BSOD - error 0x0000000a and 0x00000050
Been having random BSOD for the past week or so. Started on Sunday (11-27-11), where I had come back to my machine and it had been restarted... after logging in, find out that it was a BSOD. I then proceded to have 3 different BSOD events on Monday, which led me to perform a memtest on Tuesday...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App