Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b

19 Sep 2014   #121
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I don't know what you are reading it with download CPUz CPU-Z CPUID - System & hardware benchmark, monitoring, reporting and install it. Open ir and leave I open on the CPU tab. That is correct no matter what any other program says. Only use 1 program at a time to read the speed. CPUz is recognized as the proof of what speed the CPU is.


My System SpecsSystem Spec
.
19 Sep 2014   #122
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

That's what I'm using to obtain the CPU freqency readings.
My System SpecsSystem Spec
19 Sep 2014   #123
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

You are going to have to give me some time to wake up. It's hard at my age. Run Intel burn test at standard with CPUz open. It will tell you what your CPU is running t. You have to put stress on several cores at the same time for it to kick in. Download IntelBurnTest 2.54 Just watch out for the junk ware they want to install with it, Just uncheck the boxes.
My System SpecsSystem Spec
.

19 Sep 2014   #124
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

No sweat, it's not urgent, there are other users wanting advice, too. I am happy that the PC works as it should (so far) running my application. I ran IntelBurnTest at the highest setting during my oddyssey several times - max. frequency is always 3.5GHz. Maybe my CPU wants to retire...
My System SpecsSystem Spec
19 Sep 2014   #125
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

No, it's just me and getting old. That's my only problem. You should be seeing 3.8 turbo. I seriously doubt you will notice a great difference, but In your Bios, change the multiplier for all cores from Auto(which I believe they are set at to 38 and see what happens. That should be your stock settings. I don't have an E series chip, but with Sandy Bridge and Ivy Bridge too, non e series, when you change the multiplier, you only change the turbo speed. Try that and see how you run. If you start to BSOD, Just go back and change it back. I would leave the voltage alone right now.
My System SpecsSystem Spec
19 Sep 2014   #126
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

Ok, a venture into BIOS land it is. I'll give that a try and revert, if something odd happens.
My System SpecsSystem Spec
19 Sep 2014   #127
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Good. I had a board that was the same way. If set to auto, it wouldn't give me the correct turbo, so I set to what it is supposed to be and it worked great.
My System SpecsSystem Spec
24 Oct 2014   #128
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

Update on this neverending quest: In the meantime, I bought new memory kits - same BSODs as before - and I bought new motherboards - same BSODs as before - so that means I buy a new cheap-o graphics card next. If that changes nothing for the better, it can only be the CPU.

If only computer components could signal with certainty, if they are defective or not; all that wasted time (and money) could be saved...
My System SpecsSystem Spec
24 Oct 2014   #129
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Post the Blue Screen of Death (BSOD) Posting Instructions

Also post screenshots of CPUZ CPU, Mainboard, Memory, and SPD tabs, Just the slots with memory in them on the SPD tabs. This will tell you how to post screenshots here.
Screenshots and Files - Upload and Post in Seven Forums
My System SpecsSystem Spec
26 Oct 2014   #130
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

Long time, no post... Since last time, I have purchased new DIMMs, motherboards, graphics cards to be able to exchange existing for new parts. With every new hardware component exchanged or added, I always wiped the SSD, reinstalled Windows 7, drivers and updates. As before, I have installed only my 3D light simulation software (which happily runs on other and equivalent PCs). So, apart from the CPU that always passes with Intel's IPDT, all key parts are brand new.

So far, I had no BSOD, but my software (the only non-Microsoft application installed) freezes the PC after 10-30 minutes or stops working ("A problem caused the program to stop working correctly..."). See also attached "MR crash info.png" from the Event Viewer.

What on Earth is going on here, after all these tests, clean installs and new components purchased TWICE(!)?

Please find the files attached... much appreciated!

ps: Should I open a "fresh" thread for this? It's practically a new PC?
My System SpecsSystem Spec
Reply

 BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD 0x0000001e and 0x0000000a
Hi, I am getting frequent BSODs when the PC is idle or under load (it runs a light simulation software, no games, internet browser, etc.). Although enabled, no minidump is written, hence I can't zip one up and post it here. What I did so far (multiple times, spending too many days): I...
BSOD Help and Support
BSOD: 0x00000050 ,0x0000003b
Hello, I am getting bluescreens. I was cleaning computer and after plugging computer I got bleuscreen after 5mins of running ~ I didnt check which error it was :(. I decided to try reinstall everything so I installed Windows again. I did it, installed drivers and after playing game I got error...
BSOD Help and Support
BSOD 0x00000050 and 0x0000000a when playing games
Hello. I've been getting blue screens recently when playing games. Ntoskrnl.exe has been in all of the crash dumps and the bug check codes have been either 0x0000000a and 0x000000050. Win32k.sys has also appeared in the crash dumps. This hasn't happened during every game but it happens...
BSOD Help and Support
BSOD on start up, error 0x0000000a , 0x00000050
Problem description My problem is as follows: When the computer has been turned off for at least a few hours, I'm getting BSOD's while booting but it is rarely. When cold booting (computer has been turned off for at least several hours), I get a BSOD just after the Windows 7 `Starting...
BSOD Help and Support
BSOD at random, errors 0x0000001e, 0x00000024, 0x0000003b, 0x00000050
While the system is at idle or just light use I get the BSOD. It happens once a day and there seems to be no trigger. Core temps are at normal and run about 40 Celsius. I have tried updating most of my drivers through the device manager and will run a memtest soon. Any and all help is much...
BSOD Help and Support
Random BSOD - error 0x0000000a and 0x00000050
Been having random BSOD for the past week or so. Started on Sunday (11-27-11), where I had come back to my machine and it had been restarted... after logging in, find out that it was a BSOD. I then proceded to have 3 different BSOD events on Monday, which led me to perform a memtest on Tuesday...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App