Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b

14 Sep 2014   #31
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

It's an Intel processor or an ASUS mainboard that's wonky here - not a Morris Minor or Reliant Robin! Stink o' oil & white exhaust fume when putting the pedal down = blowing head gasket. Cars are easy ; )


My System SpecsSystem Spec
.
14 Sep 2014   #32
HarriePateman

Windows 7 Ultimate 64-bit
 
 

Have you changed the oil? Air filter?

Someone will be here soon with some more information
My System SpecsSystem Spec
14 Sep 2014   #33
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

Sure, thanks, I got some more hours at the lab tonight anyway...
My System SpecsSystem Spec
.

14 Sep 2014   #34
HarriePateman

Windows 7 Ultimate 64-bit
 
 

Have fun
My System SpecsSystem Spec
14 Sep 2014   #35
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

Yes... but no ; )

I dearly need the processing from that PC and I have to pay for replacement parts myself : (

No processors or mainboards available for salvage at the local scrapyard.
My System SpecsSystem Spec
14 Sep 2014   #36
HarriePateman

Windows 7 Ultimate 64-bit
 
 

Afraid not, hopefully we can get this sorted for you
My System SpecsSystem Spec
14 Sep 2014   #37
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Useless User, an 0X124 simply means a hardware component failed. It always blames it on the CPU, but that is because typically the CPU recognizes a piece of hardware was not responding and shut down to save the computer from damage. So, just because the processor shut down does not mean the processor is the fault. The fault can be any piece of hardware or even a driver causing the piece of hardware to act in an unexpected way. So, if you are running the IPD test and get a 0X124 BSOD, that could mean, as an example. the ram failed so the processor shut down. That's all it means.

Forgive me if I explain things you already know. I really don't know how much you know. So, I try to explain things. So, what is normally done, is start with hardware tests and hopefully find the bad piece of hardware. At this moment I don't know what has or has not been done. Give me a little while to read this thread and I will be back with you.
My System SpecsSystem Spec
14 Sep 2014   #38
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

Thanks all for spending time on this conundrum; I hope my previous posts in this thread provide some clues.

Starting point was a BIOS flash and complete re-install of Windows 7 with the latest drivers as per each manufacturer - without any application software, unnecessary drivers (I even left off the AMD graphics card driver 'til now, for example) or any bit of ASUS software.

I performed mdsched (ok), memtest86+ (ok), IPDT (sometimes ok, sometimes not ok), IntelBurnTest (ok only on highest two settings) and prime95 (sometimes ok, sometimes not ok) and the PC's innards are squeaky clean (lab use).
My System SpecsSystem Spec
14 Sep 2014   #39
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I assume you have Samsung Magician installed for your SSD. Please use it and check that it has the latest firmware update, which it most likely does. Also I would like you to run Sea Tools for Dos (SeaTools for DOS | Seagate) on your Mechanical hard drive. The instructions are in the bottom pard of the link, then you can click the I agree button and download it. Boot from either the ISO file burned to a CD or the USB drive, whichever you decide to use, then run the short and the long tests on the Mechanical drive. Don't run it on the SSD.

After you complete those, please open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Next I would like you to download the latest driver for your Fire Pro card from AMD and install them using this method :
I am going to give you some links that will help you get a good clean install and not have any drivers you don't need that will conflict with other drivers. Download a WHQL driver from Latest AMD Catalyst Video Driver for Windows 7 . Once you have them downloaded, uninstall you current driver from control panel. next clean up any left over drivers from following this tutorial Drivers - Clean Left over Files after Uninstalling and select only ATI Display Drivers. After you have done that and rebooted, install the new driver, only select custom install and install only what you have to. Very few people need most of what they include. You do not need the audio/HDMI drivers as you already have that in your Motherboard drivers. Unless there is some reason you need them, the only thing you really need is the Display Driver.

I would also like you to go into Bios and look at how your ram is set up as far as timings (just the first 4), the frequency and the voltage, it will be called dram voltage. I would like you to look at your Sata controller, which is usually in advanced options and tell me what it is set to, it will either be IDR, AHCI or Raid. While in BIOS please look at the main or monitoring section at voltages and tell me the value of the +12V, +5V and the +3.3V.

If you have any questions at all, do not hesitate to ask. I don't mind answering anything. giving further instructions or explaining why I am asking you to do these things.
My System SpecsSystem Spec
14 Sep 2014   #40
Dude

Windows 10 Pro X64
 
 

A peculiar problem for sure. In your first post, you said you did a bios flash and fresh install. All the weird symptoms, where temps appear okay..yet the BSODs occur may be a quirky BIOS flash. I would re flash after clearing the cmos, and try again.
My System SpecsSystem Spec
Reply

 BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD 0x0000001e and 0x0000000a
Hi, I am getting frequent BSODs when the PC is idle or under load (it runs a light simulation software, no games, internet browser, etc.). Although enabled, no minidump is written, hence I can't zip one up and post it here. What I did so far (multiple times, spending too many days): I...
BSOD Help and Support
BSOD: 0x00000050 ,0x0000003b
Hello, I am getting bluescreens. I was cleaning computer and after plugging computer I got bleuscreen after 5mins of running ~ I didnt check which error it was :(. I decided to try reinstall everything so I installed Windows again. I did it, installed drivers and after playing game I got error...
BSOD Help and Support
BSOD 0x00000050 and 0x0000000a when playing games
Hello. I've been getting blue screens recently when playing games. Ntoskrnl.exe has been in all of the crash dumps and the bug check codes have been either 0x0000000a and 0x000000050. Win32k.sys has also appeared in the crash dumps. This hasn't happened during every game but it happens...
BSOD Help and Support
BSOD on start up, error 0x0000000a , 0x00000050
Problem description My problem is as follows: When the computer has been turned off for at least a few hours, I'm getting BSOD's while booting but it is rarely. When cold booting (computer has been turned off for at least several hours), I get a BSOD just after the Windows 7 `Starting...
BSOD Help and Support
BSOD at random, errors 0x0000001e, 0x00000024, 0x0000003b, 0x00000050
While the system is at idle or just light use I get the BSOD. It happens once a day and there seems to be no trigger. Core temps are at normal and run about 40 Celsius. I have tried updating most of my drivers through the device manager and will run a memtest soon. Any and all help is much...
BSOD Help and Support
Random BSOD - error 0x0000000a and 0x00000050
Been having random BSOD for the past week or so. Started on Sunday (11-27-11), where I had come back to my machine and it had been restarted... after logging in, find out that it was a BSOD. I then proceded to have 3 different BSOD events on Monday, which led me to perform a memtest on Tuesday...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App