First computer froze, now blue screen

Dragonchaser, Could you please remote into it, and if possible, please post screenshots or Device Management, also a screenshot of disk management Disk Management - Post a Screen Capture Image. This will tell you how to post screenshots here.
Screenshots and Files - Upload and Post in Seven Forums

Also, Please open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Also, please open an elevated command prompt, as described above, and in the box type diskpart and press enter. Wait for the window to reply diskpart, then type list disk and press enter. Please post a screenshot of the results. It should look similar to this

Attachment 332882 Also:

Please fill out your System Specs

   Information

Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs

This is what I'm getting from your dump files

Code:

 Timestamp:        Tue Nov 26 19:41:36 2013 (52954DD0)
    CheckSum:         0005F52B
    ImageSize:        0005A000
    File version:     6.1.7601.18328
    Product version:  6.1.7601.18328
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        2.0 Dll
    File date:        00000000.00000000
    Translations:     0409.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     usbhub.sys
    OriginalFilename: usbhub.sys
    ProductVersion:   6.1.7601.18328
    FileVersion:      6.1.7601.18328 (win7sp1_gdr.131126-1436)
    FileDescription:  Default Hub Driver for USB
    LegalCopyright:   © Microsoft Corporation. All rights reserved.

This is a Windows Update, so please make sure your Windows updates are all run. It would also not hurt to check the manufacturers web site and see if you can get an updated version of the Chipset drivers and install them. On an earlier dump file I am getting

Code:

MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
 contains the address of the PFN for the corrupted page table page.
 On a 32 bit OS, parameter 2 contains a pointer to the number of used
 PTEs, and parameter 3 contains the number of used PTEs.

Please make sure your Firmware on your Adata SSD is updated to the latest version. Next,

Please Run Memtest86+

   Information

Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask

If everything passes, I would like you to run startup repair. First, I would disconnect 1 of the wires from each disk except the one that has Windows 7 installed on it. It may need to be run 3 times with attempted reboots in between each attempt. If you are using your installation DVD on the either 2nd or 3rd screen, there will be a repair my computer in the lower left corner. Click that. It will try, if it cant, use the select other options. See option 2 in this tutorial System Recovery Options

Dragonchaser, can you give me a link to the update instructions? I have 8 SSDs and have updated firmware on all of them. They're mostly from different Manufacturers and most are different methods and different problems. I may be able to give you some suggestions that may help.

Also, if Adata has a forum, you may describe your problem there. Most of the Forums have some very experienced users who know the workarounds for all kinds of problems.

Try it one more time, but this time put a check mark in the box next to the listing for A Data drive, then see if it makes a difference. I don't know much about that brand, but other brands, the updates can be a pain and the tool boxes ban be very touchy.

Doesn't sound like great support to me. I tried to download their datasheet but they wanted me to register for an account first. Personally, I would tell them it won't update the firmware and it is causing BSODs, so I want an RMA. Truthfully, I can't say it is the cause, but if it won't let you update firmware, it's defective. You'll get another one or some help updating I'm pretty sure.

By using Administrator rights, they mean when you start the program, right click the exe file and select run as administrator.