bsod computer shut down to prevent damage error


  1. Posts : 11
    windows 7 professional 32 bit
       #1

    bsod computer shut down to prevent damage error


    i get this error i have uploaded the debug-YourComputerName-xxxx.zip file
    A problem has been detected and Windows has been shut down to prevent damage to your computer.

    If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

    Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.

    Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select Safe Mode.

    Technical Information:

    *** STOP: 0x0000001E (0xFFFFFFFFC0000005, 0x0000000000000000, 0x0000000000000008, 0x0000000000000000)

    Collecting data for crash dump...
    Initializing disk for crash dump...
    Beginning dump of physical memory...
    Dumping physical memory to disk: 100
    Physical memory dump complete.
    Contact your system admin or technical support group for further assistance.
      My Computer


  2. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #2

    The zip file doesn't contain the .dmp files neccessary to analyse the BSOD.

    If you are using CCleaner - stop! Please do the following:

    Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
    Driver Verifier - Enable and Disable

    Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal and upload the new dmp file/s here.

    I recommend creating a system restore point before turning on driver verifier:
    System Restore Point - Create

    If your system fails to boot to desktop once driver verifier is enabled, turn it off by booting into Safe Mode:
    Safe Mode
      My Computer


  3. Posts : 11
    windows 7 professional 32 bit
    Thread Starter
       #3

    ok, i have enabled driver verifier,now where will the dmp files be once system is forced to bsod and rebooted?
      My Computer


  4. Posts : 11
    windows 7 professional 32 bit
    Thread Starter
       #4

    after enabling verifier my system restarted automatically when i opened multiple files i will upload d files
      My Computer


  5. Posts : 11
    windows 7 professional 32 bit
    Thread Starter
       #5

    recent zip files attached
      My Computer


  6. Posts : 11
    windows 7 professional 32 bit
    Thread Starter
       #6

    IM UPLOADING the latest .dmp files after BSOD
      My Computer


  7. Posts : 11
    windows 7 professional 32 bit
    Thread Starter
       #7

    this .dmp file is after disabling the verifier
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:49.
Find Us