Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Starting computer up code d1

15 Sep 2014   #1
jakethesnak

Windows 7 Professional 64- bit
 
 
BSOD Starting computer up code d1

Dear experts,

When Starting up my computer today my back fan on my case was making a weird noise and I could see it turning slowly. This bluscreen has happened twice before, both of the previous times it was plugged right into the power supply. After the second time however I plugged it into the motherboard. Since I plugged the fan into the motherboard I tried to run Speedfan to see if I could boost the rpm of the fan. That is when the bsod happened.

I have attached the file requested below.
Sincerely,
Jakethesnak


My System SpecsSystem Spec
.
15 Sep 2014   #2
jakethesnak

Windows 7 Professional 64- bit
 
 

Hello,

No BSOD this time but my fan is having the same problem. I was able to run Speedfan this time and that fan is running at 36 RPM. I believe my PSU is too low for my system because I have a 600W bronze certified Corsair CX600.

Sincerely,
jakethesnak
My System SpecsSystem Spec
16 Sep 2014   #3
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello and welcome Jake mate one way to find if if the PSU is up to your system is to use this calculator just enter al components in and it will give you two figures a minimum and one that gives you some leeway (recommended).
The PSU you have there is a very good one and to push it to it's limits you would need to be cranking something up.
eXtreme Power Supply Calculator

The fan issue mate might just be simply the fan is going south - try another one in the same plug in spot.
My System SpecsSystem Spec
.

16 Sep 2014   #4
jakethesnak

Windows 7 Professional 64- bit
 
 

Hello,

Thank you for settling my mind about the PSU. Its still under even with peak load. Maybe the fan is going south so next time I will order a fan soon. What about the BSODs? I just thought it was weird everytime a BSOD would happen the fan would be spinning at 36 RPM.

Sincerely,
jakethesnak
My System SpecsSystem Spec
16 Sep 2014   #5
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 


Ok Jake mate I am not that good at thosedump files yet but I think one of the problems is with a driver for the - and Iam assuming the chipset for that board, and again one that controls hardwareand probably the hard drives.
These are the drivers for the board and the chipset one is one I would be updating if it were me

GIGABYTE - Motherboard - Socket 2011 - GA-X79-UP4 (rev. 1.0)

by the way well done on what you have done yourself already and it is refreshing to see someone who has got their system specs included - so many don't and it gets very tedious asking for the same
My System SpecsSystem Spec
16 Sep 2014   #6
jakethesnak

Windows 7 Professional 64- bit
 
 

Hello,

Thank you for your help! Now it is just a waiting game.

Sincerely,
jakethesnak
My System SpecsSystem Spec
17 Sep 2014   #7
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok I might have a few minute later to scan thought the hardware stuff.
My System SpecsSystem Spec
Reply

 BSOD Starting computer up code d1




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD when starting computer up
Yo. Every time I start my computer up I get a black screen and then it turns blue. This happens before the login screen. This started after I installed my Nvidia driver. If I disable it or remove it then my computer works fine. Oh and Safemode works with no problems.
BSOD Help and Support
Occasional BSOD after starting up windows, Bug check code 0x0000004a
Every once and a while after starting up windows I will receive a BSOD, this did start happening after I started overclocking my computer, although I have since returned my bios settings completely back to stock yet I still am receiving a BSOD, so maybe it was just coincidental and something else...
BSOD Help and Support
BSOD On Starting up my computer!
Hello, I got a bsod when starting up my computer. Regards, cypherinfo
BSOD Help and Support
BSOD when starting computer in morning/bran new computer
Hi, iv decided to get some input to try and resolve this issue im having with my newly constructed PC. i will get straight to the point. i have just put together these new parts. Intel i5-3450 LGA1155 ASRock Z77 Extreme 4 8 gigs ballistix by crucial 2-4gb ddr3 1600 (pc3-12800) radeon...
BSOD Help and Support
BSOD When starting computer
Before saying you dont have the requirements to post a Bsod theard its because i just want a single question cuz the cause is alrady known I got this bsod of Bugcode_usb-driver 0x000000fe when i was atempting to start my comuter and i was having a single usb driver besides my keyboard and mouse it...
BSOD Help and Support
BSOD starting up computer
Every time I start up my computer it will instantly BSOD withing 30 seconds, I didn't do any updates, nor did I install anything new, it seems like a random occurrence. dump files are attached, I never have any time to run anything, grabbed those as fast as I could. OS is retail Hardware and OS...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App