Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD ataport.sys, Happens anytime usually at system idle :(

15 Sep 2014   #1
vanq69er

Windows 7 Ultimate x64
 
 
BSOD ataport.sys, Happens anytime usually at system idle :(

Hi all,

I am getting the following BSOD at random times but always when I leave my computer idle for 30mins+. I have disabled HDD sleep, ran anti-root kits and updated all my mobo drivers.

Any help you can give would be greatly appreciated!

Cheers


My System SpecsSystem Spec
.
16 Sep 2014   #2
HarriePateman

Windows 7 Ultimate 64-bit
 
 

Welcome to SevenForums,

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fc40009140, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc0000185, error status (normally i/o status code)
Arg3: 000000009aaae860, current process (virtual address for lock type 3, or PTE)
Arg4: fffff88001228f44, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
Okay so this look really complicated, let me explain it a little bit better for you.

Your Bugcheck that is received is:
Code:
KERNEL_DATA_INPAGE_ERROR (7a)
However this is just a clue of what the problem is, if we look here:
Code:
Arg2: ffffffffc0000185, error status (normally i/o status code)
It gives us the true error:
Code:
0x185
Whats a 0x185?
  • This Means there is a Problem with the HDD cables.
  • Or The SCSI termination is failing.
How Can i Solve a 0x185:
  • Firstly check the SATA Cable from the Port on the motherboard and on the HDD, If your problem still occurs then try a different cable and SATA Port.
  • Run Chkdsk /f /r on the system partition. You must restart the computer before the disk scan begins. If you cannot start the computer because of the error, use the Recovery Console and run Chkdsk /r.

Tip   Tip
Here is a Tutorial that can help you on performing a Dhkdsk: Disk Check
My System SpecsSystem Spec
Reply

 BSOD ataport.sys, Happens anytime usually at system idle :(




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD On partners system even when idle
Hi I am having some issues with windows 7 on my partners computer the computer keeps bluescreening and i cannot work out why first off i thought it was over heating but i have reseated the CPU and GPU with new thermal compound I thought I had fixed it when it continued to bluescreen today I can...
BSOD Help and Support
System interupts causing high CPU usage, possibly from ataport.sys
I been working on this for a month now and have had no luck looking in other posts. System interrupts uses one core of my computer 100%. I ran windows performance analyzer and it seems to be caused by ataport.sys . The problem happens periodically and will last for a couple of hours then go away. I...
Performance & Maintenance
BSOD following system idle
Hi, I'm new here so i'm hoping you can help. I recieved my computer from a family member about 6 months, when he gave it me he told me it had a problem of BSOD, my knowledge of computers is limited and having read forums i have tried to update all my drivers, i have also unplugged different...
BSOD Help and Support
Random BSOD, cant pin down, happens even while system idle
Having random crashes and restarts. Cant find a cause, cant figure out how to read the bsod error report, otherwise I would stop bothering you guys on here. Crashed many times last few days even while idle, and while internet browsing. Deleted the earlier dumps so I can have a smaller managable...
BSOD Help and Support
BSOD when System is idle
Hi there, When my system is idle, it shuts down and I get the BSOD and am told to start it normally, safe mode etc. I will be so grateful if you can help me resolve this problem!! (i've attached the generated files that you specified to this post The report is also included in the ZIP...
BSOD Help and Support
BSOD when system is idle
Hello People, i just built a new system and so far Windows 7 64bit crashed three times with a BSOD. The crashes occured when the system was idle and only a few applications were open. I installed all new drivers from the Asus homepage and flashed the bios. Besides a few regular applications i...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:46.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App